补全页加分页，每页 30 行

218 行在手机上堆成一屏一行有五万多像素长，分页后第 1 页只有八千多。

页码会夹紧：?page=999 停在最后一页而不是给空白页，解析不出来回第一页。
提交后留在同一页——处理完的行会从列表里消失，停在这儿才看得见剩下的。
翻页前若这一页有改过还没提交的下拉，先确认一次（预选的建议不算「改过」）。

internal/db/schema.sql

@@ -171,38 +171,50 @@ CREATE TABLE IF NOT EXISTS fog_blocks (
     PRIMARY KEY (user_id, gbx, gby)
 );
 
--- 地点备注与别名。按 src_pk（rond 内部地点 ID，跨快照稳定）而不是 places.id 存，
+-- 地点备注与别名。挂**坐标键**（place_key）而不是 src_pk：
--- 这样重新上传备份、数据集换了新 id 之后备注依然挂着。
+--
--- dataset_id 是后加的：src_pk 只在单个数据集内唯一，缺了它切数据集时同编号的
+-- src_pk（rond 的 Z_PK）只在单个数据集内有效——rond 每次导出/同步都会重排编号
--- 地点会把别人的备注/别名认领过去。
+-- （实测两份备份里 822 条到访的 UUID 完全一致、Z_PK 100% 不同），所以换一份备份、
+-- 换个数据集之后，同编号的完全是另一个地点，备注就再也挂不回去了。
+-- 坐标是地点的地理事实，跨备份稳定：place_key = 经纬度各取 6 位小数拼起来
+-- （约 0.1m 精度），与 Go 侧的 rond.PlaceCoordKey 必须逐位一致。
+-- dataset_id / src_pk 保留下来只作「最后一次写入时挂在哪儿」的排查线索。
 CREATE TABLE IF NOT EXISTS place_notes (
     user_id    BIGINT NOT NULL,
+    place_key  TEXT NOT NULL,
     dataset_id BIGINT NOT NULL DEFAULT 0,
-    src_pk     INT NOT NULL,
+    src_pk     INT NOT NULL DEFAULT 0,
     alias      TEXT NOT NULL DEFAULT '',
     note       TEXT NOT NULL DEFAULT '',
+    rond_note  TEXT NOT NULL DEFAULT '',
     updated_at TIMESTAMPTZ NOT NULL DEFAULT now(),
-    PRIMARY KEY (user_id, dataset_id, src_pk)
+    PRIMARY KEY (user_id, place_key)
 );
 
--- 站长对地点的「官方结论」：推荐(1) / 踩雷(-1)，与自由文本备注分开存，同样按 src_pk。
+-- 站长对地点的「官方结论」：推荐(1) / 踩雷(-1)，与备注一样按坐标键存。
 CREATE TABLE IF NOT EXISTS place_votes (
     user_id    BIGINT NOT NULL,
+    place_key  TEXT NOT NULL,
     dataset_id BIGINT NOT NULL DEFAULT 0,
-    src_pk     INT NOT NULL,
+    src_pk     INT NOT NULL DEFAULT 0,
     verdict    SMALLINT NOT NULL,
     updated_at TIMESTAMPTZ NOT NULL DEFAULT now(),
-    PRIMARY KEY (user_id, dataset_id, src_pk)
+    PRIMARY KEY (user_id, place_key)
 );
 
--- 访客对地点的投票：一人一票、可改可撤。voter_key 由匿名 cookie + IP 派生，
+-- 访客对地点的投票：一人一票、可改可撤。voter_key 由匿名 cookie + IP 派生。
--- 与数据集无关（换快照不丢），故不挂 dataset_id。
+--
+-- 这是站点自己的数据（rondbackup 里没有这一项），但同样要认得出「是哪个地点」：
+-- 挂 place_key 而不是 src_pk，理由与备注、结论一样。src_pk 只留作排查线索。
+-- 迁移时这张表没有 dataset_id 可依，只能按**活跃数据集**认领那个编号属于哪个地点
+-- （见文件末尾的迁移块）。
 CREATE TABLE IF NOT EXISTS place_visitor_votes (
-    src_pk     INT NOT NULL,
+    place_key  TEXT NOT NULL,
     voter_key  TEXT NOT NULL,
     vote       SMALLINT NOT NULL,
+    src_pk     INT NOT NULL DEFAULT 0,
     updated_at TIMESTAMPTZ NOT NULL DEFAULT now(),
-    PRIMARY KEY (src_pk, voter_key)
+    PRIMARY KEY (place_key, voter_key)
 );
 
 CREATE INDEX IF NOT EXISTS idx_pvv_src ON place_visitor_votes(src_pk);
@@ -309,9 +321,17 @@ UPDATE place_notes SET dataset_id = COALESCE((SELECT id FROM datasets WHERE is_a
 UPDATE place_votes SET dataset_id = COALESCE((SELECT id FROM datasets WHERE is_active ORDER BY id DESC LIMIT 1), 0)
  WHERE dataset_id = 0;
 
+-- ⚠️ 这一段只在「还没搬到坐标键」的库上跑：文件末尾那次迁移会把主键换成
+-- (user_id, place_key)，这里要是也跟着改回去，两张表就会在每次启动时来回翻，
+-- 永远停在最后一个执行的块上。
 DO $$
 DECLARE cols text;
 BEGIN
+    IF EXISTS (SELECT 1 FROM information_schema.columns
+               WHERE table_name = 'place_notes' AND column_name = 'place_key') THEN
+        RETURN;
+    END IF;
+
     SELECT string_agg(a.attname, ',' ORDER BY array_position(c.conkey, a.attnum))
       INTO cols
       FROM pg_constraint c
@@ -395,6 +415,7 @@ ALTER TABLE places ADD COLUMN IF NOT EXISTS src_lon      DOUBLE PRECISION;
 -- SQL 里写不出来。启动时由 ingest.BackfillAllCoordSource 统一处理，那里同时能识别出
 -- 「站点导出的备份给新建地点合成的 ZLOCATION 行」，不会把它误当成真机的原始 GPS。
 
+
 -- 地点图片：站长给地点配的图。字节由**浏览器**转成 WebP 后再上传（服务端只负责收下与转存），
 -- 1 核机器不用扛解码。storage 记这一张实际放在哪、object_key 是本地相对路径或对象存储 key：
 -- 换了存储后端之后旧图仍按各自那一列去取，不会因为改了设置就全变破图。
@@ -402,6 +423,9 @@ CREATE TABLE IF NOT EXISTS place_images (
     id         BIGSERIAL PRIMARY KEY,
     dataset_id BIGINT NOT NULL REFERENCES datasets(id) ON DELETE CASCADE,
     src_pk     INT NOT NULL,
+    -- place_key 与备注、结论共用同一套坐标键：换数据集后图片还挂得回原地点。
+    -- 对象键里仍然带 dataset_id（那只是存储路径，与「认不认得出是同一个地点」无关）。
+    place_key  TEXT NOT NULL DEFAULT '',
     storage    TEXT NOT NULL DEFAULT 'local',
     object_key TEXT NOT NULL,
     width      INT NOT NULL DEFAULT 0,
@@ -412,3 +436,116 @@ CREATE TABLE IF NOT EXISTS place_images (
     UNIQUE (dataset_id, src_pk, object_key)
 );
 CREATE INDEX IF NOT EXISTS idx_place_images_place ON place_images(dataset_id, src_pk, position);
+
+-- ---------- 附属数据改挂坐标键（一次性迁移）----------
+-- 备注 / 结论 / 图片原本挂 (dataset_id, src_pk)，换个数据集就全看不见了。
+-- 这里把它们搬到坐标键上；只在「还没有 place_key 列」时执行，所以新库直接走上面的
+-- CREATE TABLE，老库走这一段。
+--
+-- 坐标键的算法必须与 Go 侧 rond.PlaceCoordKey 逐位一致：
+--   fmt.Sprintf("%.6f|%.6f", lat, lon)  ↔  to_char(lat,'FM999990.000000')||'|'||to_char(lon,'FM999990.000000')
+-- 已在真实数据上逐条比对过（368/368 相同）。改任何一边都要重新比。
+DO $$
+DECLARE
+    cols text;
+BEGIN
+    -- 判据是**主键**而不是「列在不在」：半迁移过的库（列补上了、主键还是老的三列）
+    -- 也得能修好，否则这张表会一直卡在中间状态。
+    IF NOT EXISTS (SELECT 1 FROM information_schema.columns
+                   WHERE table_name = 'place_notes' AND column_name = 'place_key') THEN
+        ALTER TABLE place_notes ADD COLUMN place_key TEXT;
+    END IF;
+    SELECT string_agg(a.attname, ',' ORDER BY array_position(c.conkey, a.attnum))
+      INTO cols FROM pg_constraint c
+      JOIN pg_attribute a ON a.attrelid = c.conrelid AND a.attnum = ANY(c.conkey)
+     WHERE c.conname = 'place_notes_pkey';
+    IF cols IS DISTINCT FROM 'user_id,place_key' THEN
+        UPDATE place_notes n SET place_key = (
+            SELECT to_char(p.lat, 'FM999990.000000') || '|' || to_char(p.lon, 'FM999990.000000')
+            FROM places p
+            WHERE p.dataset_id = n.dataset_id AND p.src_pk = n.src_pk
+              AND p.lat IS NOT NULL AND p.lon IS NOT NULL)
+            WHERE n.place_key IS NULL;
+        -- 地点已经不在库里的（被删过），留一个不会撞的孤儿键，宁可留着也别丢
+        UPDATE place_notes SET place_key = 'orphan:' || dataset_id || ':' || src_pk
+            WHERE place_key IS NULL;
+        -- 同一坐标上有多条时只留最新的一条，否则加不上主键
+        DELETE FROM place_notes a USING place_notes b
+            WHERE a.user_id = b.user_id AND a.place_key = b.place_key
+              AND (a.updated_at, a.ctid) < (b.updated_at, b.ctid);
+        ALTER TABLE place_notes ALTER COLUMN place_key SET NOT NULL;
+        ALTER TABLE place_notes DROP CONSTRAINT IF EXISTS place_notes_pkey;
+        ALTER TABLE place_notes ADD PRIMARY KEY (user_id, place_key);
+    END IF;
+
+    IF NOT EXISTS (SELECT 1 FROM information_schema.columns
+                   WHERE table_name = 'place_votes' AND column_name = 'place_key') THEN
+        ALTER TABLE place_votes ADD COLUMN place_key TEXT;
+    END IF;
+    SELECT string_agg(a.attname, ',' ORDER BY array_position(c.conkey, a.attnum))
+      INTO cols FROM pg_constraint c
+      JOIN pg_attribute a ON a.attrelid = c.conrelid AND a.attnum = ANY(c.conkey)
+     WHERE c.conname = 'place_votes_pkey';
+    IF cols IS DISTINCT FROM 'user_id,place_key' THEN
+        UPDATE place_votes n SET place_key = (
+            SELECT to_char(p.lat, 'FM999990.000000') || '|' || to_char(p.lon, 'FM999990.000000')
+            FROM places p
+            WHERE p.dataset_id = n.dataset_id AND p.src_pk = n.src_pk
+              AND p.lat IS NOT NULL AND p.lon IS NOT NULL)
+            WHERE n.place_key IS NULL;
+        UPDATE place_votes SET place_key = 'orphan:' || dataset_id || ':' || src_pk
+            WHERE place_key IS NULL;
+        DELETE FROM place_votes a USING place_votes b
+            WHERE a.user_id = b.user_id AND a.place_key = b.place_key
+              AND (a.updated_at, a.ctid) < (b.updated_at, b.ctid);
+        ALTER TABLE place_votes ALTER COLUMN place_key SET NOT NULL;
+        ALTER TABLE place_votes DROP CONSTRAINT IF EXISTS place_votes_pkey;
+        ALTER TABLE place_votes ADD PRIMARY KEY (user_id, place_key);
+    END IF;
+
+    -- 图片自己有 id 主键，只需补列 + 回填；查询走文件末尾那个索引
+    IF NOT EXISTS (SELECT 1 FROM information_schema.columns
+                   WHERE table_name = 'place_images' AND column_name = 'place_key') THEN
+        ALTER TABLE place_images ADD COLUMN place_key TEXT NOT NULL DEFAULT '';
+    END IF;
+    UPDATE place_images i SET place_key = COALESCE((
+        SELECT to_char(p.lat, 'FM999990.000000') || '|' || to_char(p.lon, 'FM999990.000000')
+        FROM places p
+        WHERE p.dataset_id = i.dataset_id AND p.src_pk = i.src_pk
+          AND p.lat IS NOT NULL AND p.lon IS NOT NULL),
+        'orphan:' || i.dataset_id || ':' || i.src_pk)
+      WHERE i.place_key = '';
+
+    -- 访客票：这张表没有 dataset_id，回填时只能按**活跃数据集**认领那个编号属于哪个地点。
+    -- 两个数据集里都有同一编号时也只认活跃的那个——这是唯一说得通的猜法，
+    -- 认不出来的留孤儿键，票不丢。
+    IF NOT EXISTS (SELECT 1 FROM information_schema.columns
+                   WHERE table_name = 'place_visitor_votes' AND column_name = 'place_key') THEN
+        ALTER TABLE place_visitor_votes ADD COLUMN place_key TEXT;
+    END IF;
+    SELECT string_agg(a.attname, ',' ORDER BY array_position(c.conkey, a.attnum))
+      INTO cols FROM pg_constraint c
+      JOIN pg_attribute a ON a.attrelid = c.conrelid AND a.attnum = ANY(c.conkey)
+     WHERE c.conname = 'place_visitor_votes_pkey';
+    IF cols IS DISTINCT FROM 'place_key,voter_key' THEN
+        UPDATE place_visitor_votes vv SET place_key = COALESCE((
+            SELECT to_char(p.lat, 'FM999990.000000') || '|' || to_char(p.lon, 'FM999990.000000')
+            FROM places p JOIN datasets d ON d.id = p.dataset_id
+            WHERE d.is_active AND p.src_pk = vv.src_pk
+              AND p.lat IS NOT NULL AND p.lon IS NOT NULL
+            ORDER BY p.id LIMIT 1),
+            'orphan:' || vv.src_pk)
+          WHERE vv.place_key IS NULL;
+        -- 同一个访客对同一坐标只剩一条：留最新的
+        DELETE FROM place_visitor_votes a USING place_visitor_votes b
+            WHERE a.voter_key = b.voter_key AND a.place_key = b.place_key
+              AND (a.updated_at, a.ctid) < (b.updated_at, b.ctid);
+        ALTER TABLE place_visitor_votes ALTER COLUMN place_key SET NOT NULL;
+        ALTER TABLE place_visitor_votes DROP CONSTRAINT IF EXISTS place_visitor_votes_pkey;
+        ALTER TABLE place_visitor_votes ADD PRIMARY KEY (place_key, voter_key);
+    END IF;
+END $$;
+
+CREATE INDEX IF NOT EXISTS idx_place_images_key ON place_images(place_key, position);
+
+CREATE INDEX IF NOT EXISTS idx_pvv_key ON place_visitor_votes(place_key);

internal/fog/diff.go

@@ -0,0 +1,90 @@
+package fog
+
+// Diff 是一份待导入快照与当前迷雾之间的差异画像。
+//
+// 导入有两种语义完全不同的模式：叠加只做按位或、不可能丢数据；整体替换会先清空，
+// 快照里没有的块一律消失。以前两种模式在界面上只是一个下拉框，站长在下手之前
+// 看不到「这次能补多少」和「这次会丢多少」，实测里整体替换静默丢掉过 14% 的已探索区域。
+type Diff struct {
+	CurBlocks, CurCells int // 库里现有
+	IncBlocks, IncCells int // 快照本身
+
+	// GainBlocks/GainCells 是叠加模式真正新增的部分：快照里当前完全没有的整块，
+	// 加上重叠块里补亮的格。
+	GainBlocks int
+	GainCells  int
+
+	// OverlapBlocks 是与现有块坐标相同的块数，其中 SameBlocks 是一格都不会变的。
+	OverlapBlocks int
+	SameBlocks    int
+
+	// LostBlocks/LostCells 是快照里完全没有、只有整体替换才会消失的部分。
+	LostBlocks int
+	LostCells  int
+
+	curAreaM2, incAreaM2, gainAreaM2, lostAreaM2 float64
+}
+
+// DiffBlocks 比对当前块集与一份待导入快照。入参块集不要求有序。
+func DiffBlocks(cur, inc []Block) Diff {
+	var d Diff
+	d.CurBlocks, d.IncBlocks = len(cur), len(inc)
+
+	curMap := make(map[[2]int][]byte, len(cur))
+	for _, b := range cur {
+		curMap[[2]int{b.GX, b.GY}] = b.Bitmap
+		n := popcountSum(b.Bitmap)
+		d.CurCells += n
+		d.curAreaM2 += float64(n) * cellAreaM2(b.GX, b.GY)
+	}
+
+	incSet := make(map[[2]int]struct{}, len(inc))
+	for _, b := range inc {
+		incSet[[2]int{b.GX, b.GY}] = struct{}{}
+		n := popcountSum(b.Bitmap)
+		d.IncCells += n
+		d.incAreaM2 += float64(n) * cellAreaM2(b.GX, b.GY)
+
+		old, ok := curMap[[2]int{b.GX, b.GY}]
+		if !ok {
+			d.GainBlocks++
+			d.GainCells += n
+			d.gainAreaM2 += float64(n) * cellAreaM2(b.GX, b.GY)
+			continue
+		}
+		d.OverlapBlocks++
+		gain := 0
+		for i := range b.Bitmap {
+			gain += int(popcount[b.Bitmap[i]&^old[i]])
+		}
+		if gain == 0 {
+			d.SameBlocks++
+			continue
+		}
+		d.GainCells += gain
+		d.gainAreaM2 += float64(gain) * cellAreaM2(b.GX, b.GY)
+	}
+
+	for _, b := range cur {
+		if _, ok := incSet[[2]int{b.GX, b.GY}]; ok {
+			continue
+		}
+		n := popcountSum(b.Bitmap)
+		d.LostBlocks++
+		d.LostCells += n
+		d.lostAreaM2 += float64(n) * cellAreaM2(b.GX, b.GY)
+	}
+	return d
+}
+
+func (d Diff) CurAreaKm2() float64  { return d.curAreaM2 / 1e6 }
+func (d Diff) IncAreaKm2() float64  { return d.incAreaM2 / 1e6 }
+func (d Diff) GainAreaKm2() float64 { return d.gainAreaM2 / 1e6 }
+func (d Diff) LostAreaKm2() float64 { return d.lostAreaM2 / 1e6 }
+
+// MergeAreaKm2 是叠加后的总量，CoverAreaKm2 是整体替换后的总量。
+func (d Diff) MergeAreaKm2() float64 { return (d.curAreaM2 + d.gainAreaM2) / 1e6 }
+func (d Diff) CoverAreaKm2() float64 { return d.incAreaM2 / 1e6 }
+
+// Changed 报告叠加是否会让地图有任何变化——为假说明这份快照已经被完全覆盖过。
+func (d Diff) Changed() bool { return d.GainCells > 0 }

internal/fog/diff_test.go

@@ -0,0 +1,88 @@
+package fog
+
+import "testing"
+
+// blk 造一个块，cells 是块内的 (列, 行) 坐标。
+func blk(gx, gy int, cells ...[2]int) Block {
+	bm := make([]byte, bitmapSize)
+	for _, c := range cells {
+		bm[c[1]*8+c[0]/8] |= 0x80 >> (c[0] % 8)
+	}
+	return Block{GX: gx, GY: gy, Bitmap: bm}
+}
+
+func TestDiffEmptyBase(t *testing.T) {
+	d := DiffBlocks(nil, []Block{blk(10, 20, [2]int{0, 0}, [2]int{1, 0})})
+	if d.CurBlocks != 0 || d.CurCells != 0 {
+		t.Fatalf("空库不该有现有数据: %+v", d)
+	}
+	if d.GainBlocks != 1 || d.GainCells != 2 || d.IncCells != 2 {
+		t.Fatalf("空库叠加应为全部新增: %+v", d)
+	}
+	if d.LostBlocks != 0 || d.LostCells != 0 || !d.Changed() {
+		t.Fatalf("空库不该有丢失: %+v", d)
+	}
+}
+
+func TestDiffIdentical(t *testing.T) {
+	cur := []Block{blk(10, 20, [2]int{0, 0}, [2]int{1, 0}), blk(11, 20, [2]int{5, 5})}
+	d := DiffBlocks(cur, cur)
+	if d.GainCells != 0 || d.Changed() {
+		t.Fatalf("同一份快照再叠一次不该有任何新增: %+v", d)
+	}
+	if d.LostBlocks != 0 || d.LostCells != 0 {
+		t.Fatalf("同一份快照不该有可丢的部分: %+v", d)
+	}
+	if d.OverlapBlocks != 2 || d.SameBlocks != 2 {
+		t.Fatalf("两个块都应算作「重叠且无变化」: %+v", d)
+	}
+}
+
+func TestDiffOverlapGain(t *testing.T) {
+	d := DiffBlocks(
+		[]Block{blk(10, 20, [2]int{0, 0})},
+		[]Block{blk(10, 20, [2]int{0, 0}, [2]int{3, 4})})
+	if d.GainBlocks != 0 || d.GainCells != 1 {
+		t.Fatalf("重叠块应只补亮多出的那一格: %+v", d)
+	}
+	if d.OverlapBlocks != 1 || d.SameBlocks != 0 {
+		t.Fatalf("重叠但补亮了，不该记为无变化: %+v", d)
+	}
+	if d.LostBlocks != 0 {
+		t.Fatalf("同一个块不该被判为会丢失: %+v", d)
+	}
+}
+
+func TestDiffDisjoint(t *testing.T) {
+	d := DiffBlocks(
+		[]Block{blk(10, 20, [2]int{0, 0})},
+		[]Block{blk(30, 40, [2]int{1, 1})})
+	if d.GainBlocks != 1 || d.GainCells != 1 {
+		t.Fatalf("另一块应是新增: %+v", d)
+	}
+	if d.LostBlocks != 1 || d.LostCells != 1 {
+		t.Fatalf("库里那块在快照里没有，整体替换会丢掉: %+v", d)
+	}
+}
+
+// 面积按块中心纬度做 cos 修正，越靠近两极越小；总量关系也要自洽。
+func TestDiffAreas(t *testing.T) {
+	equator := DiffBlocks(nil, []Block{blk(100, WorldCells/BlockCells/2, [2]int{1, 1})})
+	high := DiffBlocks(nil, []Block{blk(100, 20000, [2]int{1, 1})})
+	if high.GainAreaKm2() <= 0 {
+		t.Fatalf("高纬单格面积应为正: %v", high.GainAreaKm2())
+	}
+	if !(equator.GainAreaKm2() > high.GainAreaKm2()) {
+		t.Fatalf("赤道单格应大于高纬: %v vs %v", equator.GainAreaKm2(), high.GainAreaKm2())
+	}
+
+	m := DiffBlocks(
+		[]Block{blk(10, 20, [2]int{0, 0})},
+		[]Block{blk(10, 20, [2]int{0, 0}, [2]int{9, 9})})
+	if diff := m.MergeAreaKm2() - (m.CurAreaKm2() + m.GainAreaKm2()); diff > 1e-12 || diff < -1e-12 {
+		t.Fatalf("叠加后总量应等于现有加新增: %v", diff)
+	}
+	if m.CoverAreaKm2() != m.IncAreaKm2() {
+		t.Fatalf("整体替换后总量应等于快照本身: %v vs %v", m.CoverAreaKm2(), m.IncAreaKm2())
+	}
+}

internal/fog/render.go

@@ -180,6 +180,12 @@ func mercY(lat float64) float64 {
 	return (math.Pi - math.Asinh(math.Tan(rad))) / (2 * math.Pi) * WorldCells
 }
 
+// BlockLonLat 返回某块中心的 WGS-84 经纬度，供差异地图定位视野。
+func BlockLonLat(gbx, gby int) (lat, lon float64) {
+	lon, lat = cellLonLat(gbx*BlockCells+BlockCells/2, gby*BlockCells+BlockCells/2)
+	return
+}
+
 func cellLonLat(cx, cy int) (float64, float64) {
 	lon := (float64(cx)+0.5)/WorldCells*360.0 - 180.0
 	n := 2 * math.Pi * (float64(cy) + 0.5) / WorldCells

internal/fog/render_diff.go

@@ -0,0 +1,200 @@
+package fog
+
+import (
+	"image"
+	"math"
+)
+
+// 差异图的三种归属。改这里的色值要同步 templates/admin/fog-preview.html 的图例。
+var (
+	DiffBothColor = [4]byte{126, 134, 146, 148} // 两边都有：导入不影响
+	DiffGainColor = [4]byte{36, 164, 90, 205}   // 只有快照有：叠加会新增
+	DiffLostColor = [4]byte{214, 56, 56, 210}   // 只有库里有：整体替换会丢
+)
+
+const (
+	diffNone uint8 = iota
+	diffBoth
+	diffGain
+	diffLost
+)
+
+// RenderDiffTile 渲染一张 256x256 的差异瓦片，供站长在真实底图上核对
+// 「这份快照能补上哪里」与「整体替换会丢掉哪里」。
+//
+// 与 RenderTile 一样按底图坐标系做 WGS84→GCJ02 纠偏；不做描边——三种颜色
+// 已经够区分，再描边在粗缩放级下会糊成一片。
+//
+// 逐格判定只在放大到「一格不小于一像素」（z>=14）时做；更粗的级别下一个块还不到
+// 一个像素，按块内占多数的类别整块涂色。绘制顺序 both→gain→lost，让「会新增」
+// 和「会丢」压住底色，重叠处不至于被灰吃掉。
+func RenderDiffTile(cur, inc map[[2]int][]byte, z, x, y int, crs string) *image.NRGBA {
+	if z < 0 || z > 22 {
+		return nil
+	}
+	step := WorldCells >> z
+	scale := 256.0 / float64(step)
+	ox, oy := float64(x*step), float64(y*step)
+
+	layer := make([]uint8, 256*256)
+	mark := func(px, py, w, h int, kind uint8) {
+		for r := 0; r < h; r++ {
+			yy := py + r
+			if yy < 0 || yy > 255 {
+				continue
+			}
+			row := yy * 256
+			for c := 0; c < w; c++ {
+				xx := px + c
+				if xx < 0 || xx > 255 {
+					continue
+				}
+				layer[row+xx] = kind
+			}
+		}
+	}
+
+	// 直接遍历块表而不是全球块范围：低缩放级下范围循环会膨胀到数十亿次空查询。
+	// GCJ 偏移最多约 700m（74 格），粗裁剪时两侧各放宽两块保证不漏。
+	const margin = 2 * BlockCells
+	lo, hi := float64(x*step-margin), float64((x+1)*step+margin)
+	rlo, rhi := float64(y*step-margin), float64((y+1)*step+margin)
+	shift := crs == "gcj02"
+
+	draw := func(pass uint8, gbx, gby int, cb, ib []byte) {
+		bx, by := float64(gbx*BlockCells), float64(gby*BlockCells)
+		if bx+BlockCells <= lo || bx >= hi || by+BlockCells <= rlo || by >= rhi {
+			return
+		}
+		ddx, ddy := 0.0, 0.0
+		if shift {
+			ddx, ddy = blockShift(gbx, gby)
+		}
+		u0 := (bx + ddx - ox) * scale
+		v0 := (by + ddy - oy) * scale
+
+		if scale >= 1 {
+			w := int(math.Ceil(scale))
+			for row := 0; row < BlockCells; row++ {
+				base := row * 8
+				for colB := 0; colB < 8; colB++ {
+					var cbv, ibv byte
+					if cb != nil {
+						cbv = cb[base+colB]
+					}
+					if ib != nil {
+						ibv = ib[base+colB]
+					}
+					if cbv|ibv == 0 {
+						continue
+					}
+					py := int(math.Floor(v0 + float64(row)*scale))
+					for bit := 0; bit < 8; bit++ {
+						m := byte(0x80 >> bit)
+						kind := cellKind(cbv&m != 0, ibv&m != 0)
+						if kind != pass {
+							continue
+						}
+						px := int(math.Floor(u0 + float64(colB*8+bit)*scale))
+						mark(px, py, w, w, kind)
+					}
+				}
+			}
+			return
+		}
+
+		// 一格不足一像素：整块按多数类涂，三种混在一起的块以数量最多的为准
+		if dominantKind(blockDiffCounts(cb, ib)) != pass {
+			return
+		}
+		u1 := (bx + BlockCells + ddx - ox) * scale
+		v1 := (by + BlockCells + ddy - oy) * scale
+		px0, py0 := int(math.Floor(u0)), int(math.Floor(v0))
+		px1, py1 := int(math.Ceil(u1)), int(math.Ceil(v1))
+		if px1-px0 < 1 {
+			px1 = px0 + 1
+		}
+		if py1-py0 < 1 {
+			py1 = py0 + 1
+		}
+		mark(px0, py0, px1-px0, py1-py0, pass)
+	}
+
+	for _, pass := range []uint8{diffBoth, diffGain, diffLost} {
+		for key, cb := range cur {
+			draw(pass, key[0], key[1], cb, inc[key])
+		}
+		// 只在快照里的块单独走一遍，两边都有的块不再重复画
+		for key, ib := range inc {
+			if _, dup := cur[key]; dup {
+				continue
+			}
+			draw(pass, key[0], key[1], nil, ib)
+		}
+	}
+
+	img := image.NewNRGBA(image.Rect(0, 0, 256, 256))
+	for i, kind := range layer {
+		if kind == diffNone {
+			continue
+		}
+		var c [4]byte
+		switch kind {
+		case diffBoth:
+			c = DiffBothColor
+		case diffGain:
+			c = DiffGainColor
+		default:
+			c = DiffLostColor
+		}
+		o := i * 4
+		img.Pix[o], img.Pix[o+1], img.Pix[o+2], img.Pix[o+3] = c[0], c[1], c[2], c[3]
+	}
+	return img
+}
+
+func cellKind(inCur, inInc bool) uint8 {
+	switch {
+	case inCur && inInc:
+		return diffBoth
+	case inInc:
+		return diffGain
+	case inCur:
+		return diffLost
+	}
+	return diffNone
+}
+
+// blockDiffCounts 数一个块里三类各占多少格。两个位图都可能缺失（只有一边有这个块）。
+func blockDiffCounts(cb, ib []byte) (both, gain, lost int) {
+	n := len(cb)
+	if len(ib) > n {
+		n = len(ib)
+	}
+	for i := 0; i < n; i++ {
+		var c, in byte
+		if i < len(cb) {
+			c = cb[i]
+		}
+		if i < len(ib) {
+			in = ib[i]
+		}
+		both += int(popcount[c&in])
+		gain += int(popcount[in&^c])
+		lost += int(popcount[c&^in])
+	}
+	return
+}
+
+// dominantKind 取三类里占得最多的一类，用来在粗缩放级下决定整块的着色。
+func dominantKind(both, gain, lost int) uint8 {
+	switch {
+	case gain > 0 && gain >= both && gain >= lost:
+		return diffGain
+	case lost > 0 && lost >= both:
+		return diffLost
+	case both > 0:
+		return diffBoth
+	}
+	return diffNone
+}

internal/fog/render_diff_test.go

@@ -0,0 +1,114 @@
+package fog
+
+import (
+	"image"
+	"math"
+	"testing"
+)
+
+func bmOf(cells ...[2]int) []byte {
+	bm := make([]byte, bitmapSize)
+	for _, c := range cells {
+		bm[c[1]*8+c[0]/8] |= 0x80 >> (c[0] % 8)
+	}
+	return bm
+}
+
+func pixAt(img *image.NRGBA, px, py int) [4]byte {
+	i := (py*256 + px) * 4
+	return [4]byte{img.Pix[i], img.Pix[i+1], img.Pix[i+2], img.Pix[i+3]}
+}
+
+// z=18 时一格正好 16 像素，块 (100,200) 完整落在瓦片 (400,800) 里，
+// 格 (col,row) 的中心像素是 (col*16+8, row*16+8)。
+func TestRenderDiffTilePerCell(t *testing.T) {
+	key := [2]int{100, 200}
+	cur := map[[2]int][]byte{key: bmOf([2]int{0, 0}, [2]int{4, 0})}
+	inc := map[[2]int][]byte{key: bmOf([2]int{0, 0}, [2]int{1, 0})}
+	img := RenderDiffTile(cur, inc, 18, 400, 800, "wgs84")
+	if img == nil {
+		t.Fatal("瓦片不该为空")
+	}
+	if got := pixAt(img, 8, 8); got != DiffBothColor {
+		t.Errorf("两边都有的格应为灰色，实际 %v", got)
+	}
+	if got := pixAt(img, 24, 8); got != DiffGainColor {
+		t.Errorf("只有快照有的格应为绿色，实际 %v", got)
+	}
+	if got := pixAt(img, 72, 8); got != DiffLostColor {
+		t.Errorf("只有库里有、整体替换会丢的格应为红色，实际 %v", got)
+	}
+	if got := pixAt(img, 200, 200); got[3] != 0 {
+		t.Errorf("没被探索的格应保持透明，实际 %v", got)
+	}
+}
+
+func TestRenderDiffTileSingleSided(t *testing.T) {
+	key := [2]int{100, 200}
+	onlyCur := RenderDiffTile(map[[2]int][]byte{key: bmOf([2]int{3, 3})}, nil, 18, 400, 800, "wgs84")
+	if got := pixAt(onlyCur, 56, 56); got != DiffLostColor {
+		t.Errorf("快照里完全没有的块应整块为红，实际 %v", got)
+	}
+	onlyInc := RenderDiffTile(nil, map[[2]int][]byte{key: bmOf([2]int{3, 3})}, 18, 400, 800, "wgs84")
+	if got := pixAt(onlyInc, 56, 56); got != DiffGainColor {
+		t.Errorf("库里完全没有的块应整块为绿，实际 %v", got)
+	}
+}
+
+// z=10 时一格不足一像素，块只占 4x4 像素，按块内多数类涂色。
+func TestRenderDiffTileCoarseZoomUsesDominantKind(t *testing.T) {
+	key := [2]int{100, 200}
+	cur := map[[2]int][]byte{key: bmOf([2]int{0, 0})}
+	inc := map[[2]int][]byte{key: bmOf([2]int{1, 1}, [2]int{2, 2}, [2]int{3, 3})}
+	img := RenderDiffTile(cur, inc, 10, 1, 3, "wgs84")
+
+	const step, scale = WorldCells >> 10, 256.0 / (WorldCells >> 10)
+	bx, by := float64(key[0]*BlockCells), float64(key[1]*BlockCells)
+	px := int(math.Floor((bx - 1*step) * scale))
+	py := int(math.Floor((by - 3*step) * scale))
+	if got := pixAt(img, px+1, py+1); got != DiffGainColor {
+		t.Errorf("三格新增、一格不变的块应以绿色为主，实际 %v", got)
+	}
+	if w := int(math.Ceil(float64(BlockCells) * scale)); w != 4 {
+		t.Fatalf("z=10 下块应占 4 像素，实际 %d", w)
+	}
+}
+
+func TestRenderDiffTileEdgeCases(t *testing.T) {
+	if RenderDiffTile(nil, nil, 18, 400, 800, "wgs84") == nil {
+		t.Error("两边都空也应返回一张空瓦片")
+	}
+	if RenderDiffTile(nil, nil, 23, 0, 0, "wgs84") != nil {
+		t.Error("超出缩放范围应返回 nil")
+	}
+}
+
+func TestDominantKind(t *testing.T) {
+	cases := []struct {
+		both, gain, lost int
+		want             uint8
+	}{
+		{0, 0, 0, diffNone},
+		{5, 1, 0, diffBoth},
+		{1, 5, 0, diffGain},
+		{1, 0, 5, diffLost},
+		{2, 2, 0, diffGain}, // 平局让「会新增」胜出
+		{3, 1, 1, diffBoth},
+	}
+	for _, c := range cases {
+		if got := dominantKind(c.both, c.gain, c.lost); got != c.want {
+			t.Errorf("dominantKind(%d,%d,%d)=%d，期望 %d", c.both, c.gain, c.lost, got, c.want)
+		}
+	}
+}
+
+func TestBlockDiffCounts(t *testing.T) {
+	both, gain, lost := blockDiffCounts(bmOf([2]int{0, 0}, [2]int{1, 0}), bmOf([2]int{0, 0}, [2]int{2, 0}))
+	if both != 1 || gain != 1 || lost != 1 {
+		t.Errorf("一块里应各有一格：both=%d gain=%d lost=%d", both, gain, lost)
+	}
+	both, gain, lost = blockDiffCounts(nil, bmOf([2]int{5, 5}))
+	if both != 0 || gain != 1 || lost != 0 {
+		t.Errorf("只有快照有该块：both=%d gain=%d lost=%d", both, gain, lost)
+	}
+}

internal/ingest/ingest.go

@@ -67,15 +67,41 @@ func insertEntityRaw(ctx context.Context, tx *sql.Tx, datasetID int64, rows map[
 }
 
 // contentHash 给备份内容算指纹，用来识别「内容没变、只是重新导出了一次」的上传。
-// rond 每次导出连 WAL 一起打包，字节必然不同，文件摘要挡不住这种重复；
+// rond 每次导出连 WAL 一起打包，字节必然不同，文件摘要挡不住这种重复。
-// 但同一批到访的 Z_PK 是稳定的，所以按到访自然键排序后取摘要即可。
+//
+// 指纹按**到访/活动/地点的稳定标识**算，绝不能掺 Z_PK：rond 每次导出/同步都会重排
+// 编号（实测两份备份里 822 条到访的 UUID 完全一致、Z_PK 100% 不同），拿编号当指纹会把
+// 「同一批数据重导一次」判成新内容 —— 于是新建数据集，而备注与投票是按 dataset_id
+// 隔离的，换了数据集就再也看不见。
+//
+// 没有 UUID 的老备份退回「到达时间 + 地点坐标」，仍比编号可靠。
 func contentHash(b *rond.Backup) string {
-	keys := make([]string, 0, len(b.Visits))
+	locCoord := make(map[int]string, len(b.Locations))
+	keys := make([]string, 0, len(b.Visits)+len(b.Locations)+len(b.Activities))
+	for _, l := range b.Locations {
+		locCoord[l.SrcPK] = fmt.Sprintf("%.6f/%.6f", l.Lat, l.Lon)
+		keys = append(keys, "L"+l.Name+"/"+locCoord[l.SrcPK])
+	}
 	for _, v := range b.Visits {
 		if v.Arrival == nil {
+			continue // 导入时就被跳过的行，不该影响指纹
+		}
+		if u := b.VisitUUID[v.SrcPK]; u != "" {
+			keys = append(keys, "V"+u)
 			continue
 		}
-		keys = append(keys, fmt.Sprintf("%d|%d", v.SrcPK, v.Arrival.Unix()))
+		loc := ""
+		if v.LocationSrcPK != nil {
+			loc = locCoord[*v.LocationSrcPK]
+		}
+		keys = append(keys, fmt.Sprintf("T%d/%s", v.Arrival.Unix(), loc))
+	}
+	for _, a := range b.Activities {
+		if u := b.ActivityUUID[a.SrcPK]; u != "" {
+			keys = append(keys, "A"+u)
+			continue
+		}
+		keys = append(keys, "A"+a.Name)
 	}
 	sort.Strings(keys)
 	h := sha256.New()

internal/ingest/ingest_test.go

@@ -0,0 +1,107 @@
+package ingest
+
+import (
+	"fmt"
+	"testing"
+	"time"
+
+	"rond-with-you/internal/rond"
+)
+
+// sampleBackup 造一份最小的备份：到访 + 地点 + 活动，编号与 UUID 分别给定。
+func sampleBackup(pks []int, uuids []string) *rond.Backup {
+	b := &rond.Backup{VisitUUID: map[int]string{}, ActivityUUID: map[int]string{}}
+	for i, pk := range pks {
+		at := time.Unix(int64(1700000000+i*3600), 0)
+		b.Visits = append(b.Visits, rond.Visit{SrcPK: pk, Arrival: &at, LocationSrcPK: intp(1)})
+		b.VisitUUID[pk] = uuids[i]
+	}
+	b.Locations = []rond.Location{{SrcPK: 1, Name: "家", Lat: 24.1, Lon: 109.1}}
+	b.Activities = []rond.Activity{{SrcPK: 9, Name: "工作"}}
+	b.ActivityUUID[9] = "cccccccccccccccccccccccccccccccc"
+	return b
+}
+
+func intp(v int) *int { return &v }
+
+// 同一批数据重新导出一次：UUID 一个没变、Z_PK 全被打乱（顺序也变了），
+// 指纹必须一样。否则会被判成「新内容」→ 新建数据集 → 按 dataset_id 隔离的
+// 备注与投票全部失联。
+func TestContentHashIgnoresPKReorder(t *testing.T) {
+	a := sampleBackup([]int{1, 2, 3}, []string{
+		"aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa",
+		"bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb",
+		"dddddddddddddddddddddddddddddddd",
+	})
+	b := sampleBackup([]int{555, 276, 88}, []string{
+		"dddddddddddddddddddddddddddddddd",
+		"aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa",
+		"bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb",
+	})
+	if contentHash(a) != contentHash(b) {
+		t.Fatal("编号重排不该改变指纹")
+	}
+}
+
+// 内容真的变了（多一条到访）就得算不同的指纹，否则新数据会被当成重复上传而丢掉。
+func TestContentHashDetectsNewVisit(t *testing.T) {
+	a := sampleBackup([]int{1, 2}, []string{
+		"aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa",
+		"bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb",
+	})
+	b := sampleBackup([]int{1, 2, 3}, []string{
+		"aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa",
+		"bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb",
+		"dddddddddddddddddddddddddddddddd",
+	})
+	if contentHash(a) == contentHash(b) {
+		t.Fatal("多了一条到访就是不同内容")
+	}
+}
+
+// 只改了地点名（到访一条没动）也算内容变了：站点是靠地名认地点的。
+func TestContentHashDetectsPlaceRename(t *testing.T) {
+	a := sampleBackup([]int{1}, []string{"aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa"})
+	b := sampleBackup([]int{1}, []string{"aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa"})
+	b.Locations[0].Name = "老家"
+	if contentHash(a) == contentHash(b) {
+		t.Fatal("地点改名应改变指纹")
+	}
+}
+
+// 没有 UUID 的老备份退回「到达时间 + 地点坐标」，同一批数据重导仍要认出是同一份。
+func TestContentHashFallsBackWithoutUUID(t *testing.T) {
+	a := sampleBackup([]int{1, 2}, []string{"", ""})
+	b := sampleBackup([]int{700, 900}, []string{"", ""})
+	if contentHash(a) != contentHash(b) {
+		t.Fatal("没有 UUID 时应按到达时间与地点兜底，不该受编号影响")
+	}
+	c := sampleBackup([]int{1, 2}, []string{"", ""})
+	c.Visits[1].Arrival = ptrTime(time.Unix(1700000000, 0)) // 改掉第二条的时间
+	if contentHash(a) == contentHash(c) {
+		t.Fatal("时间不同应算不同内容")
+	}
+}
+
+// 没有到达时间的行导入时就被跳过，不该参与指纹。
+func TestContentHashSkipsRowsWithoutArrival(t *testing.T) {
+	a := sampleBackup([]int{1}, []string{"aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa"})
+	b := sampleBackup([]int{1}, []string{"aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa"})
+	b.Visits = append(b.Visits, rond.Visit{SrcPK: 42})
+	if contentHash(a) != contentHash(b) {
+		t.Fatal("缺到达时间的行不该影响指纹")
+	}
+}
+
+// 指纹是稳定的十六进制摘要，不是随手拼的字符串。
+func TestContentHashShape(t *testing.T) {
+	h := contentHash(sampleBackup([]int{1}, []string{"aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa"}))
+	if len(h) != 64 {
+		t.Fatalf("应是 64 位 sha256 十六进制，实际 %d 位: %s", len(h), h)
+	}
+	if _, err := fmt.Sscanf(h, "%x", new(string)); err != nil {
+		t.Fatalf("不是纯十六进制: %v", err)
+	}
+}
+
+func ptrTime(t time.Time) *time.Time { return &t }

internal/notes/notes.go

@@ -1,11 +1,14 @@
 // Package notes 存放站长为地点加的别名与备注。
-// 备注按 rond 的地点 ID（src_pk）而非数据库自增 id 存储，
+//
-// 因此重新上传备份、地点换了新 id 之后内容依然挂在原地。
+// 备注挂的是**坐标键**（place_key）而不是 rond 的地点编号：src_pk 只在单个数据集内有效
+// （rond 每次导出都会重排 Z_PK，实测两份备份里 822 条到访的 UUID 一致而 Z_PK 100% 不同），
+// 换个数据集同编号就是另一个地点，备注会全部失联。坐标是地理事实，跨数据集稳定。
 package notes
 
 import (
 	"context"
 	"database/sql"
+	"fmt"
 	"strings"
 	"time"
 )
@@ -20,15 +23,26 @@ type Note struct {
 
 type Store struct{ DB *sql.DB }
 
-// All 返回某个数据集的全站备注（站点只有一个站长账号，读的时候不按 user_id 过滤，
+// placeKeyExpr 把某个 places 别名下的坐标换算成 place_key。
-// 这样匿名访客也能看到别名；写的时候才需要登录用户的 id）。
+// **必须与 Go 侧的 rond.PlaceCoordKey 逐位一致**：
-// 后写覆盖先写，保证同一地点只保留一条。必须按 dataset_id 过滤：
+//
-// src_pk 只在单个数据集内唯一，跨数据集同编号是完全不同的地点。
+//	fmt.Sprintf("%.6f|%.6f")  ↔  to_char(x,'FM999990.000000')||'|'||to_char(y,'FM999990.000000')
+//
+// 已在真实数据上逐条比对（368/368 相同）。改任何一边都要重新比。
+func placeKeyExpr(alias string) string {
+	return fmt.Sprintf(
+		"to_char(%[1]s.lat,'FM999990.000000')||'|'||to_char(%[1]s.lon,'FM999990.000000')", alias)
+}
+
+// All 返回某个数据集里「有备注的地点」，键是地点在该数据集内的编号。
+// 站点只有一个站长账号，读的时候不按 user_id 过滤（匿名访客也要看到别名）。
 func (s *Store) All(ctx context.Context, datasetID int64) (map[int]Note, error) {
 	out := map[int]Note{}
-	rows, err := s.DB.QueryContext(ctx,
+	rows, err := s.DB.QueryContext(ctx, `
-		`SELECT src_pk, alias, note, rond_note, updated_at FROM place_notes
+		SELECT p.src_pk, n.alias, n.note, n.rond_note, n.updated_at
-		  WHERE dataset_id=$1 ORDER BY updated_at DESC`, datasetID)
+		FROM places p
+		JOIN place_notes n ON n.place_key = `+placeKeyExpr("p")+`
+		WHERE p.dataset_id = $1 AND p.lat IS NOT NULL AND p.lon IS NOT NULL`, datasetID)
 	if err != nil {
 		return out, err
 	}
@@ -46,9 +60,9 @@ func (s *Store) All(ctx context.Context, datasetID int64) (map[int]Note, error)
 // SetNote 只改备注、保留别名（批量「清空备注」用）；两者都为空则删除记录。
 func (s *Store) SetNote(ctx context.Context, userID, datasetID int64, srcPK int, content string) error {
 	var alias string
-	err := s.DB.QueryRowContext(ctx,
+	err := s.DB.QueryRowContext(ctx, `SELECT n.alias FROM place_notes n
-		`SELECT alias FROM place_notes WHERE user_id=$1 AND dataset_id=$2 AND src_pk=$3`,
+		JOIN places p ON n.place_key = `+placeKeyExpr("p")+`
-		userID, datasetID, srcPK).Scan(&alias)
+		WHERE n.user_id=$1 AND p.dataset_id=$2 AND p.src_pk=$3`, userID, datasetID, srcPK).Scan(&alias)
 	if err != nil && err != sql.ErrNoRows {
 		return err
 	}
@@ -57,8 +71,9 @@ func (s *Store) SetNote(ctx context.Context, userID, datasetID int64, srcPK int,
 
 // Delete 删除某地点的整条备注与别名。
 func (s *Store) Delete(ctx context.Context, userID, datasetID int64, srcPK int) error {
-	_, err := s.DB.ExecContext(ctx,
+	_, err := s.DB.ExecContext(ctx, `DELETE FROM place_notes n USING places p
-		`DELETE FROM place_notes WHERE user_id=$1 AND dataset_id=$2 AND src_pk=$3`, userID, datasetID, srcPK)
+		WHERE n.user_id=$1 AND p.dataset_id=$2 AND p.src_pk=$3
+		  AND n.place_key = `+placeKeyExpr("p"), userID, datasetID, srcPK)
 	return err
 }
 
@@ -68,21 +83,28 @@ func (s *Store) Save(ctx context.Context, userID, datasetID int64, srcPK int, al
 	content = strings.TrimSpace(content)
 	if alias == "" && content == "" {
 		// 没有 rond 备注时直接删行；有则只清空手写部分，别把回填结果一起删掉
-		_, err := s.DB.ExecContext(ctx,
+		if _, err := s.DB.ExecContext(ctx, `DELETE FROM place_notes n USING places p
-			`DELETE FROM place_notes WHERE user_id=$1 AND dataset_id=$2 AND src_pk=$3 AND rond_note=''`,
+			WHERE n.user_id=$1 AND p.dataset_id=$2 AND p.src_pk=$3
-			userID, datasetID, srcPK)
+			  AND n.place_key = `+placeKeyExpr("p")+` AND n.rond_note=''`,
-		if err != nil {
+			userID, datasetID, srcPK); err != nil {
 			return err
 		}
-		_, err = s.DB.ExecContext(ctx,
+		_, err := s.DB.ExecContext(ctx, `UPDATE place_notes n
-			`UPDATE place_notes SET alias='', note='', updated_at=now()
+			SET alias='', note='', updated_at=now()
-			  WHERE user_id=$1 AND dataset_id=$2 AND src_pk=$3`, userID, datasetID, srcPK)
+			FROM places p
+			WHERE n.user_id=$1 AND p.dataset_id=$2 AND p.src_pk=$3
+			  AND n.place_key = `+placeKeyExpr("p"), userID, datasetID, srcPK)
 		return err
 	}
-	_, err := s.DB.ExecContext(ctx, `INSERT INTO place_notes (user_id, dataset_id, src_pk, alias, note, updated_at)
+	// 先按坐标键算出这条地点该挂在哪，找不到该地点就什么也不写
-		VALUES ($1,$2,$3,$4,$5,now())
+	_, err := s.DB.ExecContext(ctx, `INSERT INTO place_notes
-		ON CONFLICT (user_id, dataset_id, src_pk)
+			(user_id, place_key, dataset_id, src_pk, alias, note, updated_at)
-		DO UPDATE SET alias=EXCLUDED.alias, note=EXCLUDED.note, updated_at=now()`,
+		SELECT $1, `+placeKeyExpr("p")+`, $2, $3, $4, $5, now()
+		FROM places p
+		WHERE p.dataset_id=$2 AND p.src_pk=$3 AND p.lat IS NOT NULL AND p.lon IS NOT NULL
+		ON CONFLICT (user_id, place_key) DO UPDATE SET
+			alias=EXCLUDED.alias, note=EXCLUDED.note,
+			dataset_id=EXCLUDED.dataset_id, src_pk=EXCLUDED.src_pk, updated_at=now()`,
 		userID, datasetID, srcPK, alias, content)
 	return err
 }
@@ -92,20 +114,22 @@ func (s *Store) Save(ctx context.Context, userID, datasetID int64, srcPK int, al
 // 只重写 rond_note 一列，站长手写的 note 一概不动。返回写了多少行。
 func (s *Store) BackfillRond(ctx context.Context, userID, datasetID int64) (int, error) {
 	// DISTINCT 在「日期 + 内容」这一层做，同一天重复写的同一句只留一条
-	const agg = `
+	agg := `
 	WITH raw AS (
-		SELECT p.src_pk, to_char(v.arrival, 'YYYY-MM-DD') || ' ' || btrim(v.remark) AS line
+		SELECT ` + placeKeyExpr("p") + ` AS key,
+		       to_char(v.arrival, 'YYYY-MM-DD') || ' ' || btrim(v.remark) AS line
 		FROM visits v JOIN places p ON p.id = v.place_id
 		WHERE v.dataset_id = $1 AND btrim(COALESCE(v.remark, '')) <> ''
+		  AND p.lat IS NOT NULL AND p.lon IS NOT NULL
 	), uniq AS (
-		SELECT DISTINCT src_pk, line, left(line, 10) AS day FROM raw
+		SELECT DISTINCT key, line, left(line, 10) AS day FROM raw
 	), agg AS (
-		SELECT src_pk, string_agg(line, E'\n' ORDER BY day, line) AS txt FROM uniq GROUP BY src_pk
+		SELECT key, string_agg(line, E'\n' ORDER BY day, line) AS txt FROM uniq GROUP BY key
 	)`
 	res, err := s.DB.ExecContext(ctx, agg+`
-		INSERT INTO place_notes (user_id, dataset_id, src_pk, alias, note, rond_note, updated_at)
+		INSERT INTO place_notes (user_id, place_key, dataset_id, src_pk, alias, note, rond_note, updated_at)
-		SELECT $2, $1, src_pk, '', '', txt, now() FROM agg
+		SELECT $2, key, $1, 0, '', '', txt, now() FROM agg
-		ON CONFLICT (user_id, dataset_id, src_pk) DO UPDATE SET rond_note = EXCLUDED.rond_note`,
+		ON CONFLICT (user_id, place_key) DO UPDATE SET rond_note = EXCLUDED.rond_note`,
 		datasetID, userID)
 	if err != nil {
 		return 0, err
@@ -113,15 +137,16 @@ func (s *Store) BackfillRond(ctx context.Context, userID, datasetID int64) (int,
 	affected, _ := res.RowsAffected()
 
 	// 备注被删掉的地点要清掉旧值，否则会一直留着过期的 rond 内容。
-	// 限定在本数据集的地点里：datasetID 不合法时子查询为空，一行都不会动，
+	// 限定在本数据集的地点里：datasetID 不合法时子查询为空，一行都不会动。
-	// 不会把别的数据集的回填结果误清掉。
 	if _, err := s.DB.ExecContext(ctx, `
 		UPDATE place_notes n SET rond_note = ''
-		WHERE n.user_id = $2 AND n.dataset_id = $1 AND n.rond_note <> ''
+		WHERE n.user_id = $2 AND n.rond_note <> ''
-		  AND n.src_pk IN (SELECT src_pk FROM places WHERE dataset_id = $1)
+		  AND n.place_key IN (SELECT `+placeKeyExpr("p")+`
+			FROM places p WHERE p.dataset_id = $1 AND p.lat IS NOT NULL AND p.lon IS NOT NULL)
 		  AND NOT EXISTS (
 			SELECT 1 FROM visits v JOIN places p ON p.id = v.place_id
-			WHERE v.dataset_id = $1 AND p.src_pk = n.src_pk AND btrim(COALESCE(v.remark, '')) <> ''
+			WHERE v.dataset_id = $1 AND `+placeKeyExpr("p")+` = n.place_key
+			  AND btrim(COALESCE(v.remark, '')) <> ''
 		  )`, datasetID, userID); err != nil {
 		return 0, err
 	}

internal/rond/diff.go

@@ -0,0 +1,390 @@
+package rond
+
+import (
+	"fmt"
+	"sort"
+	"time"
+)
+
+// 两份数据的比对。
+//
+// 对齐键的选择是这个文件的全部要点：rond 每次导出/同步都会重排 Z_PK（实测两份备份里
+// 822 条到访的 UUID 完全一致、Z_PK 100% 不同），所以 src_pk 只能在一个数据集内部使用。
+// 跨备份对齐一律走真机写的 UUID；地点/标签/交通方式没有 UUID，退到「名称 + 坐标」。
+//
+// 这里只做判定，不碰数据库、也不写任何东西。
+
+// StoredVisit 是库里的一条到访，外加从 entity_raw 留档取出的对齐键。
+type StoredVisit struct {
+	SrcPK        int
+	UUID         string // 空 = 站点新建的行（真机不会给它 UUID）
+	Arrival      *time.Time
+	Departure    *time.Time
+	Remark       string
+	Emoji        string
+	Bookmarked   bool
+	UserAdded    bool
+	PlaceKey     string // 地点对齐键，空 = 该到访没有地点
+	PlaceName    string // 仅用于展示
+	ActivityName string
+}
+
+// StoredPlace 是库里的一个地点。
+type StoredPlace struct {
+	SrcPK       int
+	Key         string
+	Name        string
+	Lat, Lon    float64
+	Province    string
+	City        string
+	POICategory string
+	VisitCount  int
+}
+
+// StoredActivity 是库里的一个活动类型。
+type StoredActivity struct {
+	SrcPK int
+	Name  string
+	UUID  string
+}
+
+// FieldChange 是冲突里的一项字段差异。From 是库里当前的值，To 是备份里的值。
+type FieldChange struct {
+	Label string
+	From  string
+	To    string
+}
+
+// VisitConflict 是同一条到访（UUID 相同）两边字段不一致。
+type VisitConflict struct {
+	Backup Visit
+	DB     StoredVisit
+	Fields []FieldChange
+}
+
+// VisitDiff 是到访的差异画像。
+type VisitDiff struct {
+	Added   []Visit       // 备份有、库里没有
+	Removed []StoredVisit // 库里有、备份里没有
+	Changed []VisitConflict
+	Same    int // 对齐上且完全一致
+}
+
+// PlaceDiff 是地点的差异画像。
+type PlaceDiff struct {
+	Added   []Location
+	Removed []StoredPlace
+	Changed []PlaceConflict
+	Same    int
+}
+
+type PlaceConflict struct {
+	Backup Location
+	DB     StoredPlace
+	Fields []FieldChange
+}
+
+// ActivityDiff 是活动类型的差异画像（按 UUID 对齐，退不到就按名称）。
+type ActivityDiff struct {
+	Added   []Activity
+	Removed []StoredActivity
+	Changed []ActivityConflict
+	Same    int
+}
+
+type ActivityConflict struct {
+	Backup Activity
+	DB     StoredActivity
+	Fields []FieldChange
+}
+
+// PlaceCoordKey 是地点的跨备份对齐键：**只认坐标，不认名称**。
+//
+// 地点没有 UUID，名称又会被站点自己的「补全缺失地址」改掉（实测：站内把
+// 「体育馆美食街」反查成了「河池市国民体质监测中心」，坐标一字未动，于是 17 条
+// 到访全被误报成「换了地点」）。坐标取 6 位小数（约 0.1m）——足以吸收浮点往返误差，
+// 又不会把挨着的两个地点并成一个。
+func PlaceCoordKey(lat, lon float64) string {
+	return fmt.Sprintf("%.6f|%.6f", lat, lon)
+}
+
+func coordStr(v float64) string { return fmt.Sprintf("%.6f", v) }
+
+// DiffVisits 按 UUID 对齐两边的到访。
+//
+// 真机偶尔有条目没写 UUID（实测 824 行到访里有 2 行），只按 UUID 配对会让同一条既算
+// 「新增」又算「仅站内有」；所以没有 UUID 的行退到「到达时间 + 地点」兜底配对。
+// 库里那些连兜底也配不上的（站点新建的行）一律算「库里有、备份没有」。
+func DiffVisits(stored []StoredVisit, b *Backup) VisitDiff {
+	placeKey, placeName := map[int]string{}, map[int]string{}
+	for _, l := range b.Locations {
+		// 没有坐标的地点不参与坐标对齐，否则它们会共用 "0.000000|0.000000" 互相认领
+		if l.Lat != 0 || l.Lon != 0 {
+			placeKey[l.SrcPK] = PlaceCoordKey(l.Lat, l.Lon)
+		}
+		placeName[l.SrcPK] = placeLabel(l.Name, l.Lat, l.Lon)
+	}
+	actName := map[int]string{}
+	for _, a := range b.Activities {
+		actName[a.SrcPK] = a.Name
+	}
+
+	used := make([]bool, len(stored))
+	byUUID := make(map[string]int, len(stored))
+	byTime := map[string][]int{}
+	for i, sv := range stored {
+		if sv.UUID != "" {
+			byUUID[sv.UUID] = i
+			continue
+		}
+		if sv.Arrival != nil {
+			k := timeKey(*sv.Arrival, sv.PlaceKey)
+			byTime[k] = append(byTime[k], i)
+		}
+	}
+
+	var d VisitDiff
+	classify := func(i int, v Visit) {
+		used[i] = true
+		sv := stored[i]
+		if fields := visitFieldChanges(sv, v, placeKey, placeName, actName); len(fields) > 0 {
+			d.Changed = append(d.Changed, VisitConflict{Backup: v, DB: sv, Fields: fields})
+		} else {
+			d.Same++
+		}
+	}
+
+	for _, v := range b.Visits {
+		if v.Arrival == nil {
+			continue // 没有到达时间的行导入时就被跳过了，不该被算成「新增」
+		}
+		if uuid := b.VisitUUID[v.SrcPK]; uuid != "" {
+			if i, ok := byUUID[uuid]; ok {
+				classify(i, v)
+				continue
+			}
+			d.Added = append(d.Added, v)
+			continue
+		}
+		bpk := ""
+		if v.LocationSrcPK != nil {
+			bpk = placeKey[*v.LocationSrcPK]
+		}
+		if list := byTime[timeKey(*v.Arrival, bpk)]; len(list) > 0 {
+			byTime[timeKey(*v.Arrival, bpk)] = list[1:]
+			classify(list[0], v)
+			continue
+		}
+		d.Added = append(d.Added, v)
+	}
+	for i, sv := range stored {
+		if !used[i] {
+			d.Removed = append(d.Removed, sv)
+		}
+	}
+	sortVisits(d)
+	return d
+}
+
+// timeKey 是没有 UUID 时的兜底配对键。只到秒：苹果时间戳转过来是浮点秒，
+// 而 PG 存的是微秒，逐位比会永远配不上。
+func timeKey(t time.Time, place string) string {
+	return fmt.Sprintf("%d|%s", t.Unix(), place)
+}
+
+func visitFieldChanges(sv StoredVisit, v Visit, placeKey, placeName, actName map[int]string) []FieldChange {
+	var out []FieldChange
+	add := func(label, from, to string) {
+		if from != to {
+			out = append(out, FieldChange{Label: label, From: from, To: to})
+		}
+	}
+	if !sameTime(sv.Arrival, v.Arrival) {
+		add("到达时间", fmtTime(sv.Arrival), fmtTime(v.Arrival))
+	}
+	if !sameTime(sv.Departure, v.Departure) {
+		add("离开时间", fmtTime(sv.Departure), fmtTime(v.Departure))
+	}
+	// 地点按坐标判、显示名称；活动按名称判。都不能比 src_pk——两边编号空间不同。
+	bp, bn := "", ""
+	if v.LocationSrcPK != nil {
+		bp, bn = placeKey[*v.LocationSrcPK], placeName[*v.LocationSrcPK]
+	}
+	// 地点按坐标判、显示名称：名称被「补全地址」反查改过，不算换了地点
+	if sv.PlaceKey != bp {
+		out = append(out, FieldChange{Label: "地点", From: sv.PlaceName, To: bn})
+	}
+	bl := ""
+	if v.ActivitySrcPK != nil {
+		bl = actName[*v.ActivitySrcPK]
+	}
+	add("活动", sv.ActivityName, bl)
+	add("备注", sv.Remark, v.Remark)
+	add("表情", sv.Emoji, v.Emoji)
+	add("收藏", fmtBool(sv.Bookmarked), fmtBool(v.Bookmarked))
+	return out
+}
+
+// placeLabel 给没有名字的地点一个可读的占位。
+func placeLabel(name string, lat, lon float64) string {
+	if name != "" {
+		return name
+	}
+	return fmt.Sprintf("%.5f, %.5f", lat, lon)
+}
+
+// DiffPlaces 对齐地点。坐标优先（改名不影响配对），配不上再按名称找一遍
+// （覆盖「站点把坐标纠偏过」这种），两样都对不上才算新增。
+func DiffPlaces(stored []StoredPlace, b *Backup) PlaceDiff {
+	byCoord := make(map[string]StoredPlace, len(stored))
+	byName := map[string]StoredPlace{}
+	for _, sp := range stored {
+		if sp.Lat != 0 || sp.Lon != 0 {
+			byCoord[PlaceCoordKey(sp.Lat, sp.Lon)] = sp
+		}
+		if _, dup := byName[sp.Name]; !dup && sp.Name != "" {
+			byName[sp.Name] = sp
+		}
+	}
+	used := map[int]bool{}
+	var d PlaceDiff
+	classify := func(sp StoredPlace, l Location) {
+		used[sp.SrcPK] = true
+		if fields := placeFieldChanges(sp, l); len(fields) > 0 {
+			d.Changed = append(d.Changed, PlaceConflict{Backup: l, DB: sp, Fields: fields})
+		} else {
+			d.Same++
+		}
+	}
+	for _, l := range b.Locations {
+		if sp, ok := byCoord[PlaceCoordKey(l.Lat, l.Lon)]; ok && !used[sp.SrcPK] {
+			classify(sp, l)
+			continue
+		}
+		if sp, ok := byName[l.Name]; ok && !used[sp.SrcPK] {
+			classify(sp, l)
+			continue
+		}
+		d.Added = append(d.Added, l)
+	}
+	for _, sp := range stored {
+		if !used[sp.SrcPK] {
+			d.Removed = append(d.Removed, sp)
+		}
+	}
+	sort.Slice(d.Added, func(i, j int) bool { return d.Added[i].Name < d.Added[j].Name })
+	sort.Slice(d.Removed, func(i, j int) bool { return d.Removed[i].Name < d.Removed[j].Name })
+	sort.Slice(d.Changed, func(i, j int) bool { return d.Changed[i].DB.Name < d.Changed[j].DB.Name })
+	return d
+}
+
+// placeFieldChanges 比地点上除对齐键之外的字段。名称也算——按坐标配上之后，
+// 「名字不一样」正是站长最想看到的那类差异。
+func placeFieldChanges(sp StoredPlace, l Location) []FieldChange {
+	var out []FieldChange
+	add := func(label, from, to string) {
+		if from != to {
+			out = append(out, FieldChange{Label: label, From: from, To: to})
+		}
+	}
+	add("名称", sp.Name, l.Name)
+	add("纬度", coordStr(sp.Lat), coordStr(l.Lat))
+	add("经度", coordStr(sp.Lon), coordStr(l.Lon))
+	add("省份", sp.Province, l.Province)
+	add("城市", sp.City, l.City)
+	add("分类", sp.POICategory, l.POICategory)
+	return out
+}
+
+// DiffActivities 优先按 UUID 对齐；库里没有 UUID 的（站点新建）退回名称匹配，
+// 匹配不上就算「库里有、备份没有」。
+func DiffActivities(stored []StoredActivity, b *Backup) ActivityDiff {
+	byUUID := map[string]StoredActivity{}
+	byName := map[string]StoredActivity{}
+	for _, sa := range stored {
+		if sa.UUID != "" {
+			byUUID[sa.UUID] = sa
+		}
+		if _, dup := byName[sa.Name]; !dup {
+			byName[sa.Name] = sa
+		}
+	}
+	var d ActivityDiff
+	matched := map[int]bool{}
+	for _, a := range b.Activities {
+		sa, ok := byUUID[b.ActivityUUID[a.SrcPK]]
+		if !ok {
+			if sa, ok = byName[a.Name]; !ok {
+				d.Added = append(d.Added, a)
+				continue
+			}
+		}
+		matched[sa.SrcPK] = true
+		if sa.Name != a.Name {
+			d.Changed = append(d.Changed, ActivityConflict{Backup: a, DB: sa,
+				Fields: []FieldChange{{Label: "名称", From: sa.Name, To: a.Name}}})
+		} else {
+			d.Same++
+		}
+	}
+	for _, sa := range stored {
+		if !matched[sa.SrcPK] {
+			d.Removed = append(d.Removed, sa)
+		}
+	}
+	sort.Slice(d.Added, func(i, j int) bool { return d.Added[i].Name < d.Added[j].Name })
+	sort.Slice(d.Removed, func(i, j int) bool { return d.Removed[i].Name < d.Removed[j].Name })
+	return d
+}
+
+func sortVisits(d VisitDiff) {
+	tv := func(t *time.Time) int64 {
+		if t == nil {
+			return 0
+		}
+		return t.Unix()
+	}
+	sort.Slice(d.Added, func(i, j int) bool { return tv(d.Added[i].Arrival) < tv(d.Added[j].Arrival) })
+	sort.Slice(d.Removed, func(i, j int) bool { return tv(d.Removed[i].Arrival) < tv(d.Removed[j].Arrival) })
+	sort.Slice(d.Changed, func(i, j int) bool { return tv(d.Changed[i].Backup.Arrival) < tv(d.Changed[j].Backup.Arrival) })
+}
+
+func sameTime(a, b *time.Time) bool {
+	if a == nil || b == nil {
+		return a == nil && b == nil
+	}
+	return a.Equal(*b)
+}
+
+func fmtTime(t *time.Time) string {
+	if t == nil {
+		return "—"
+	}
+	return t.Local().Format("2006-01-02 15:04")
+}
+
+func fmtBool(v bool) string {
+	if v {
+		return "是"
+	}
+	return "否"
+}
+
+// Counts 汇总各实体的三类条数，供概览展示。
+type Counts struct {
+	Added, Removed, Changed, Same int
+}
+
+func (c Counts) Total() int { return c.Added + c.Removed + c.Changed + c.Same }
+
+func VisitCounts(d VisitDiff) Counts {
+	return Counts{len(d.Added), len(d.Removed), len(d.Changed), d.Same}
+}
+
+func PlaceCounts(d PlaceDiff) Counts {
+	return Counts{len(d.Added), len(d.Removed), len(d.Changed), d.Same}
+}
+
+func ActivityCounts(d ActivityDiff) Counts {
+	return Counts{len(d.Added), len(d.Removed), len(d.Changed), d.Same}
+}

internal/rond/diff_test.go

@@ -0,0 +1,293 @@
+package rond
+
+import (
+	"testing"
+	"time"
+)
+
+func tp(s string) *time.Time {
+	t, err := time.Parse("2006-01-02 15:04", s)
+	if err != nil {
+		panic(err)
+	}
+	return &t
+}
+
+func ip(v int) *int { return &v }
+
+// 两组编号刻意完全不同：rond 每次导出都会重排 Z_PK，对齐只能靠 UUID。
+const (
+	uuidA = "11111111111111111111111111111111"
+	uuidB = "22222222222222222222222222222222"
+	uuidC = "33333333333333333333333333333333"
+)
+
+func sampleBackup() *Backup {
+	return &Backup{
+		Visits: []Visit{
+			{SrcPK: 555, Arrival: tp("2026-09-01 10:00"), Departure: tp("2026-09-01 11:00"),
+				LocationSrcPK: ip(3), ActivitySrcPK: ip(7)},
+			{SrcPK: 556, Arrival: tp("2026-09-02 10:00"), LocationSrcPK: ip(3)},
+		},
+		Locations: []Location{
+			{SrcPK: 3, Name: "家", Lat: 24.1, Lon: 109.1, City: "柳州市"},
+			{SrcPK: 4, Name: "公司", Lat: 24.2, Lon: 109.2, City: "柳州市"},
+		},
+		Activities: []Activity{
+			{SrcPK: 7, Name: "工作"},
+			{SrcPK: 8, Name: "散步"},
+		},
+		VisitUUID:    map[int]string{555: uuidA, 556: uuidB},
+		ActivityUUID: map[int]string{7: uuidC},
+	}
+}
+
+func TestDiffVisitsAlignsByUUIDNotPK(t *testing.T) {
+	stored := []StoredVisit{
+		{SrcPK: 1, UUID: uuidA, Arrival: tp("2026-09-01 10:00"), Departure: tp("2026-09-01 11:00"),
+			PlaceKey: PlaceCoordKey(24.1, 109.1), ActivityName: "工作"},
+		{SrcPK: 2, UUID: uuidB, Arrival: tp("2026-09-02 10:00"),
+			PlaceKey: PlaceCoordKey(24.1, 109.1)},
+	}
+	d := DiffVisits(stored, sampleBackup())
+	if len(d.Added) != 0 || len(d.Removed) != 0 || len(d.Changed) != 0 {
+		t.Fatalf("两边一致时不该有差异: +%d -%d ~%d", len(d.Added), len(d.Removed), len(d.Changed))
+	}
+	if d.Same != 2 {
+		t.Fatalf("应配上 2 条，实际 %d", d.Same)
+	}
+}
+
+func TestDiffVisitsFieldChanges(t *testing.T) {
+	stored := []StoredVisit{{
+		SrcPK: 1, UUID: uuidA, Arrival: tp("2026-09-01 09:00"), Departure: tp("2026-09-01 11:00"),
+		PlaceKey: PlaceCoordKey(24.1, 109.1), ActivityName: "工作", Remark: "站点备注",
+	}}
+	d := DiffVisits(stored, sampleBackup())
+	if len(d.Changed) != 1 {
+		t.Fatalf("到达时间不同应算冲突，实际 %d 条", len(d.Changed))
+	}
+	f := d.Changed[0].Fields
+	if len(f) != 2 {
+		t.Fatalf("应报出到达时间与备注两项，实际 %v", f)
+	}
+	if f[0].Label != "到达时间" || f[1].Label != "备注" {
+		t.Fatalf("字段名不对: %v", f)
+	}
+	if f[1].From != "站点备注" || f[1].To != "" {
+		t.Fatalf("方向搞反了（From 应是库里的值）: %+v", f[1])
+	}
+}
+
+// 站点新建的到访没有 UUID，而且它的 src_pk 很可能与真机新行的编号撞上——
+// 绝不能因为编号相同就当成同一条。
+func TestDiffVisitsIgnoresPKCollision(t *testing.T) {
+	stored := []StoredVisit{{
+		SrcPK: 555, UUID: "", Arrival: tp("2026-08-01 08:00"), UserAdded: true,
+		PlaceKey: PlaceCoordKey(30.0, 120.0),
+	}}
+	d := DiffVisits(stored, sampleBackup())
+	if len(d.Added) != 2 {
+		t.Fatalf("备份里两条都是新增，实际 %d", len(d.Added))
+	}
+	if len(d.Removed) != 1 {
+		t.Fatalf("站点补录那条应算「仅库里有」，实际 %d", len(d.Removed))
+	}
+	if !d.Removed[0].UserAdded {
+		t.Error("站点补录的标记要带上，页面上要区分开")
+	}
+}
+
+// 真机偶尔有不带 UUID 的到访，只按 UUID 配对会让同一条既算新增又算仅站内有。
+func TestDiffVisitsFallsBackWhenUUIDMissing(t *testing.T) {
+	b := &Backup{
+		Visits: []Visit{
+			{SrcPK: 900, Arrival: tp("2026-09-01 10:00"), LocationSrcPK: ip(3)},
+			{SrcPK: 901, Arrival: tp("2026-09-02 10:00"), LocationSrcPK: ip(3)},
+		},
+		Locations:    []Location{{SrcPK: 3, Name: "家", Lat: 24.1, Lon: 109.1}},
+		VisitUUID:    map[int]string{}, // 一条都没有 UUID
+		ActivityUUID: map[int]string{},
+	}
+	stored := []StoredVisit{
+		{SrcPK: 1, Arrival: tp("2026-09-01 10:00"), PlaceKey: PlaceCoordKey(24.1, 109.1)},
+		{SrcPK: 2, Arrival: tp("2026-09-02 10:00"), PlaceKey: PlaceCoordKey(24.1, 109.1)},
+	}
+	d := DiffVisits(stored, b)
+	if len(d.Added) != 0 || len(d.Removed) != 0 {
+		t.Fatalf("没有 UUID 时应按「到达时间 + 地点」兜底配对: +%d -%d", len(d.Added), len(d.Removed))
+	}
+	if d.Same != 2 {
+		t.Fatalf("两条都该配上，实际 %d", d.Same)
+	}
+}
+
+// 兜底配对要认得出「同一条但时间被改过」——时间不同就配不上，此时按新增 + 仅站内有报出，
+// 总比静默当成同一条好。
+func TestDiffVisitsFallbackNeedsSameTime(t *testing.T) {
+	b := &Backup{
+		Visits:    []Visit{{SrcPK: 900, Arrival: tp("2026-09-01 10:00"), LocationSrcPK: ip(3)}},
+		Locations: []Location{{SrcPK: 3, Name: "家", Lat: 24.1, Lon: 109.1}},
+		VisitUUID: map[int]string{},
+	}
+	stored := []StoredVisit{{SrcPK: 1, Arrival: tp("2026-09-01 11:00"), PlaceKey: PlaceCoordKey(24.1, 109.1)}}
+	d := DiffVisits(stored, b)
+	if len(d.Added) != 1 || len(d.Removed) != 1 {
+		t.Fatalf("时间对不上时该分别报出: +%d -%d", len(d.Added), len(d.Removed))
+	}
+}
+
+func TestDiffVisitsSkipsRowsWithoutArrival(t *testing.T) {
+	b := sampleBackup()
+	b.Visits = append(b.Visits, Visit{SrcPK: 557, LocationSrcPK: ip(3)})
+	d := DiffVisits(nil, b)
+	if len(d.Added) != 2 {
+		t.Fatalf("没有到达时间的行导入时就被跳过，不该算新增，实际 %d", len(d.Added))
+	}
+}
+
+func TestDiffPlacesByKey(t *testing.T) {
+	b := sampleBackup()
+	stored := []StoredPlace{
+		{SrcPK: 10, Key: PlaceCoordKey(24.1, 109.1), Name: "家", Lat: 24.1, Lon: 109.1, City: "柳州市"},
+	}
+	d := DiffPlaces(stored, b)
+	if len(d.Added) != 1 || d.Added[0].Name != "公司" {
+		t.Fatalf("应只有「公司」是新增: %+v", d.Added)
+	}
+	if len(d.Removed) != 0 || len(d.Changed) != 0 || d.Same != 1 {
+		t.Fatalf("「家」应配上且无差异: same=%d changed=%d removed=%d", d.Same, len(d.Changed), len(d.Removed))
+	}
+}
+
+func TestDiffPlacesReportsFieldChanges(t *testing.T) {
+	b := sampleBackup()
+	stored := []StoredPlace{
+		{SrcPK: 10, Key: PlaceCoordKey(24.1, 109.1), Name: "家", Lat: 24.1, Lon: 109.1, City: "桂林市"},
+	}
+	d := DiffPlaces(stored, b)
+	if len(d.Changed) != 1 {
+		t.Fatalf("城市不同应算冲突，实际 %d", len(d.Changed))
+	}
+	if f := d.Changed[0].Fields; len(f) != 1 || f[0].Label != "城市" || f[0].From != "桂林市" || f[0].To != "柳州市" {
+		t.Fatalf("字段差异不对: %+v", f)
+	}
+}
+
+func TestDiffActivities(t *testing.T) {
+	b := sampleBackup()
+	stored := []StoredActivity{
+		{SrcPK: 20, Name: "工作", UUID: uuidC},
+		{SrcPK: 21, Name: "站点自建"},
+	}
+	d := DiffActivities(stored, b)
+	if len(d.Added) != 1 || d.Added[0].Name != "散步" {
+		t.Fatalf("「散步」应是新增: %+v", d.Added)
+	}
+	if len(d.Removed) != 1 || d.Removed[0].Name != "站点自建" {
+		t.Fatalf("站点自建的活动应算仅库里有: %+v", d.Removed)
+	}
+	if d.Same != 1 {
+		t.Fatalf("「工作」应配上，实际 same=%d", d.Same)
+	}
+}
+
+// 活动改了名：UUID 还在，就该认出来是同一个，只报名称变化，而不是「删一个加一个」。
+func TestDiffActivitiesRenameByUUID(t *testing.T) {
+	b := sampleBackup()
+	stored := []StoredActivity{{SrcPK: 20, Name: "上班", UUID: uuidC}}
+	d := DiffActivities(stored, b)
+	if len(d.Added) != 1 || len(d.Removed) != 0 {
+		t.Fatalf("只该多出「散步」，「上班」应认出是同一个: +%d -%d", len(d.Added), len(d.Removed))
+	}
+	if len(d.Changed) != 1 || d.Changed[0].Fields[0].From != "上班" || d.Changed[0].Fields[0].To != "工作" {
+		t.Fatalf("应按 UUID 认出重命名: %+v", d.Changed)
+	}
+}
+
+func TestPlaceCoordKeyStable(t *testing.T) {
+	a := PlaceCoordKey(24.1, 109.1)
+	if a != PlaceCoordKey(24.1, 109.1) {
+		t.Fatal("同样的输入应得到同样的键")
+	}
+	if a == PlaceCoordKey(24.1, 109.2) {
+		t.Fatal("坐标不同不该算同一个地点")
+	}
+}
+
+// 站点把地点反查改名（坐标没动）时，到访层面不该报「换了地点」——
+// 实测里这一条会让 17 条到访全变成假冲突。
+func TestDiffVisitsIgnoresPlaceRename(t *testing.T) {
+	b := &Backup{
+		Visits:    []Visit{{SrcPK: 5, Arrival: tp("2026-09-01 10:00"), LocationSrcPK: ip(3)}},
+		Locations: []Location{{SrcPK: 3, Name: "河池市国民体质监测中心", Lat: 24.691827, Lon: 108.035268}},
+		VisitUUID: map[int]string{5: uuidA},
+	}
+	stored := []StoredVisit{{
+		SrcPK: 1, UUID: uuidA, Arrival: tp("2026-09-01 10:00"),
+		PlaceKey: PlaceCoordKey(24.691827, 108.035268), PlaceName: "体育馆美食街",
+	}}
+	d := DiffVisits(stored, b)
+	if len(d.Changed) != 0 {
+		t.Fatalf("只改了地点名不该算到访冲突: %+v", d.Changed[0].Fields)
+	}
+	if d.Same != 1 {
+		t.Fatalf("应算作一致，实际 same=%d", d.Same)
+	}
+}
+
+// 反之，地点层面要把改名报出来。
+func TestDiffPlacesReportsRename(t *testing.T) {
+	b := &Backup{Locations: []Location{
+		{SrcPK: 3, Name: "河池市国民体质监测中心", Lat: 24.691827, Lon: 108.035268, City: "河池市"},
+	}}
+	stored := []StoredPlace{{
+		SrcPK: 10, Key: PlaceCoordKey(24.691827, 108.035268), Name: "体育馆美食街",
+		Lat: 24.691827, Lon: 108.035268, City: "河池市",
+	}}
+	d := DiffPlaces(stored, b)
+	if len(d.Added) != 0 || len(d.Removed) != 0 {
+		t.Fatalf("坐标一样就是同一个地点: +%d -%d", len(d.Added), len(d.Removed))
+	}
+	if len(d.Changed) != 1 {
+		t.Fatalf("改名应报成一条冲突，实际 %d", len(d.Changed))
+	}
+	f := d.Changed[0].Fields
+	if len(f) != 1 || f[0].Label != "名称" || f[0].From != "体育馆美食街" || f[0].To != "河池市国民体质监测中心" {
+		t.Fatalf("字段差异不对: %+v", f)
+	}
+}
+
+// 没有坐标的地点不能都落到同一个键上，否则两个不同地点会互相认领。
+func TestDiffPlacesWithoutCoordDoesNotCollide(t *testing.T) {
+	b := &Backup{Locations: []Location{{SrcPK: 3, Name: "甲地"}}}
+	stored := []StoredPlace{
+		{SrcPK: 10, Name: "甲地"},
+		{SrcPK: 11, Name: "乙地"},
+	}
+	d := DiffPlaces(stored, b)
+	if len(d.Added) != 0 || len(d.Removed) != 1 {
+		t.Fatalf("应只配上同名的「甲地」: +%d -%d", len(d.Added), len(d.Removed))
+	}
+	if d.Removed[0].Name != "乙地" {
+		t.Fatalf("没配上的应是「乙地」，实际 %q", d.Removed[0].Name)
+	}
+	if d.Same != 1 {
+		t.Fatalf("「甲地」应算一致，实际 %d", d.Same)
+	}
+}
+
+// 站点把坐标纠偏过（名称没变）也要认得出是同一个地点。
+func TestDiffPlacesMatchesByNameWhenCoordMoved(t *testing.T) {
+	b := &Backup{Locations: []Location{{SrcPK: 3, Name: "家", Lat: 24.100001, Lon: 109.100001}}}
+	stored := []StoredPlace{{
+		SrcPK: 10, Key: PlaceCoordKey(24.1, 109.1), Name: "家", Lat: 24.1, Lon: 109.1,
+	}}
+	d := DiffPlaces(stored, b)
+	if len(d.Added) != 0 || len(d.Removed) != 0 {
+		t.Fatalf("名称一样就该配上: +%d -%d", len(d.Added), len(d.Removed))
+	}
+	if len(d.Changed) != 1 || d.Changed[0].Fields[0].Label != "纬度" {
+		t.Fatalf("应报出坐标差异: %+v", d.Changed)
+	}
+}

internal/rond/export.go

@@ -1332,9 +1332,12 @@ var uuidNamespace = [16]byte{0x6b, 0x1c, 0x9a, 0x2e, 0x42, 0x7d, 0x4f, 0x16,
 // uuidV5 由命名空间与名字生成 RFC 4122 版本 5 的 UUID（16 字节原始形式）。
 //
 // rond 给每条到访、每个活动都存一个 16 字节 UUID（ZIDENTIFIER_ / ZUID_，真机里全是 v4），
-// 站点这边没有对应字段。这里用确定性算法补：名字只取表名 + src_pk（src_pk 跨快照稳定），
+// 站点新建的行没有真机 UUID 可继承。这里用确定性算法补：名字取表名 + src_pk
-// 于是同一条记录每次导出拿到的都是同一个 UUID——若改成随机，每次导出的包都会让 rond
+// （src_pk 在**同一个数据集内**稳定，够用了），于是同一条记录每次导出拿到的都是同一个
-// 把同一批记录当成新的。
+// UUID——若改成随机，每次导出的包都会让 rond 把同一批记录当成新的。
+//
+// 注意这只保证「同一数据集内幂等」，不是跨备份的稳定标识：rond 那边每次导入都会重排
+// Z_PK，真正的跨备份对齐键是它原生的 ZIDENTIFIER_（见 diff.go）。
 func uuidV5(name string) []byte {
 	h := sha1.New()
 	h.Write(uuidNamespace[:])

internal/rond/merge.go

@@ -0,0 +1,170 @@
+package rond
+
+// 合并计划：把「差异画像 + 站长在页面上做的选择」翻译成一份可执行的改动清单。
+// 这里只做判定，不碰数据库、也不写任何东西。
+
+// 站长对一条冲突的处理方式。
+const (
+	PickBackup = "backup" // 用备份（实机）的值覆盖站内
+	PickDB     = "db"     // 保留站内的值
+	PickSkip   = "skip"   // 这条不动
+)
+
+// Choices 是差异页提交上来的选择。冲突是逐条选的，键分别是到访 UUID、
+// 地点坐标键、活动 UUID。
+type Choices struct {
+	AddVisits bool // 把备份里多出来的到访并进来
+	AddPlaces bool
+	AddActs   bool
+
+	VisitClash map[string]string
+	PlaceClash map[string]string
+	ActClash   map[string]string
+
+	// 删除：「仅站内有」的记录按库里编号勾选，默认一个都不删。
+	// 键是 src_pk 而不是 UUID——站点补录的行压根没有 UUID。
+	DelVisits map[int]bool
+	DelPlaces map[int]bool
+	DelActs   map[int]bool
+}
+
+func (c Choices) visitPick(key string) string    { return pickOf(c.VisitClash, key) }
+func (c Choices) placePick(key string) string    { return pickOf(c.PlaceClash, key) }
+func (c Choices) activityPick(key string) string { return pickOf(c.ActClash, key) }
+
+func pickOf(m map[string]string, key string) string {
+	switch m[key] {
+	case PickBackup, PickDB, PickSkip:
+		return m[key]
+	}
+	return PickDB // 没提交或提交了怪值：默认保留站内的，不误伤
+}
+
+// VisitPatch 表示用备份侧的值覆盖库里的那一条。
+type VisitPatch struct {
+	UUID string // 对齐键
+	V    Visit
+}
+
+// PlacePatch 同理，键是坐标键。
+type PlacePatch struct {
+	CoordKey string
+	L        Location
+}
+
+// ActivityPatch 键是活动 UUID（没有 UUID 时退回名称）。
+type ActivityPatch struct {
+	Key string
+	A   Activity
+}
+
+// MergePlan 是一次合并要做的全部改动。
+type MergePlan struct {
+	AddPlaces []Location
+	UpdPlaces []PlacePatch
+	DelPlaces []StoredPlace
+	AddActs   []Activity
+	UpdActs   []ActivityPatch
+	DelActs   []StoredActivity
+	AddVisits []Visit
+	UpdVisits []VisitPatch
+	DelVisits []StoredVisit
+}
+
+// Empty 报告这份计划什么事都不用做。
+func (p MergePlan) Empty() bool {
+	return len(p.AddPlaces)+len(p.UpdPlaces)+len(p.DelPlaces)+
+		len(p.AddActs)+len(p.UpdActs)+len(p.DelActs)+
+		len(p.AddVisits)+len(p.UpdVisits)+len(p.DelVisits) == 0
+}
+
+// BuildMergePlan 按选择把差异筛成改动清单。
+func BuildMergePlan(vd VisitDiff, pd PlaceDiff, ad ActivityDiff, c Choices) MergePlan {
+	var p MergePlan
+
+	if c.AddPlaces {
+		p.AddPlaces = pd.Added
+	}
+	for _, cf := range pd.Changed {
+		if c.placePick(cf.DB.Key) == PickBackup {
+			p.UpdPlaces = append(p.UpdPlaces, PlacePatch{CoordKey: cf.DB.Key, L: cf.Backup})
+		}
+	}
+	for _, sp := range pd.Removed {
+		if c.DelPlaces[sp.SrcPK] {
+			p.DelPlaces = append(p.DelPlaces, sp)
+		}
+	}
+
+	if c.AddActs {
+		p.AddActs = ad.Added
+	}
+	for _, cf := range ad.Changed {
+		if c.activityPick(activityKey(cf.DB)) == PickBackup {
+			p.UpdActs = append(p.UpdActs, ActivityPatch{Key: activityKey(cf.DB), A: cf.Backup})
+		}
+	}
+	for _, sa := range ad.Removed {
+		if c.DelActs[sa.SrcPK] {
+			p.DelActs = append(p.DelActs, sa)
+		}
+	}
+
+	if c.AddVisits {
+		p.AddVisits = vd.Added
+		// 新到访可能挂在一个「备份里新出现、库里还没有」的地点/活动上：
+		// 不把它们一起建出来，到访的 place_id / activity_id 就无从映射，只能整条丢掉。
+		p.AddPlaces = appendMissingPlaces(p.AddPlaces, pd.Added)
+		p.AddActs = appendMissingActs(p.AddActs, ad.Added)
+	}
+	for _, cf := range vd.Changed {
+		if c.visitPick(cf.DB.UUID) == PickBackup {
+			p.UpdVisits = append(p.UpdVisits, VisitPatch{UUID: cf.DB.UUID, V: cf.Backup})
+		}
+	}
+	for _, sv := range vd.Removed {
+		if c.DelVisits[sv.SrcPK] {
+			p.DelVisits = append(p.DelVisits, sv)
+		}
+	}
+	return p
+}
+
+func appendMissingPlaces(have, more []Location) []Location {
+	seen := make(map[int]bool, len(have))
+	for _, l := range have {
+		seen[l.SrcPK] = true
+	}
+	for _, l := range more {
+		if !seen[l.SrcPK] {
+			have = append(have, l)
+			seen[l.SrcPK] = true
+		}
+	}
+	return have
+}
+
+func appendMissingActs(have, more []Activity) []Activity {
+	seen := make(map[int]bool, len(have))
+	for _, a := range have {
+		seen[a.SrcPK] = true
+	}
+	for _, a := range more {
+		if !seen[a.SrcPK] {
+			have = append(have, a)
+			seen[a.SrcPK] = true
+		}
+	}
+	return have
+}
+
+// activityKey 是活动冲突在页面上的标识：优先 UUID（改名也能对上），没有才用名称。
+func activityKey(sa StoredActivity) string {
+	if sa.UUID != "" {
+		return sa.UUID
+	}
+	return "n:" + sa.Name
+}
+
+// ActivityKey 供页面与处理函数共用同一套键。
+func ActivityKey(sa StoredActivity) string { return activityKey(sa) }

internal/rond/merge_test.go

@@ -0,0 +1,76 @@
+package rond
+
+import "testing"
+
+func TestBuildMergePlanPicks(t *testing.T) {
+	vd := VisitDiff{
+		Added:   []Visit{{SrcPK: 900, Arrival: tp("2026-09-09 10:00")}},
+		Removed: []StoredVisit{{SrcPK: 5, UUID: uuidA}},
+		Changed: []VisitConflict{
+			{Backup: Visit{SrcPK: 901, Arrival: tp("2026-09-01 12:00")}, DB: StoredVisit{SrcPK: 1, UUID: uuidA}},
+			{Backup: Visit{SrcPK: 902, Arrival: tp("2026-09-02 12:00")}, DB: StoredVisit{SrcPK: 2, UUID: uuidB}},
+		},
+	}
+	pd := PlaceDiff{Added: []Location{{SrcPK: 3, Name: "新地点"}}}
+	ad := ActivityDiff{Added: []Activity{{SrcPK: 8, Name: "散步"}}}
+
+	p := BuildMergePlan(vd, pd, ad, Choices{
+		AddVisits:  true,
+		AddPlaces:  true,
+		AddActs:    false,
+		VisitClash: map[string]string{uuidA: PickBackup, uuidB: PickDB},
+	})
+	if len(p.AddVisits) != 1 || p.AddVisits[0].SrcPK != 900 {
+		t.Fatalf("新增到访应合入一条: %+v", p.AddVisits)
+	}
+	if len(p.UpdVisits) != 1 || p.UpdVisits[0].UUID != uuidA {
+		t.Fatalf("只有选了「用实机」的那条才该更新: %+v", p.UpdVisits)
+	}
+	if len(p.AddPlaces) != 1 {
+		t.Fatalf("勾了「并进来」就该带上新增地点: %d", len(p.AddPlaces))
+	}
+	// 即使没单独勾活动，合入到访时也要把它可能挂着的「库里还没有的活动」带上，
+	// 否则那条到访的 activity_id 无从映射，只能整条丢掉。
+	if len(p.AddActs) != 1 || p.AddActs[0].Name != "散步" {
+		t.Fatalf("合入到访应连带它需要的活动: %+v", p.AddActs)
+	}
+	// 「仅站内有」永远不进计划：删除是单独的事，绝不顺手做
+	if len(p.UpdPlaces)+len(p.UpdActs) != 0 {
+		t.Fatal("不该有地点/活动更新")
+	}
+}
+
+// 没提交的键、或提交了怪值，一律当成「保留站内」——不误伤。
+func TestBuildMergePlanDefaultsToKeepDB(t *testing.T) {
+	vd := VisitDiff{Changed: []VisitConflict{
+		{Backup: Visit{SrcPK: 901}, DB: StoredVisit{SrcPK: 1, UUID: uuidA}},
+	}}
+	p := BuildMergePlan(vd, PlaceDiff{}, ActivityDiff{}, Choices{VisitClash: map[string]string{uuidA: "wat"}})
+	if len(p.UpdVisits) != 0 {
+		t.Fatalf("怪值不该被当成「用实机」: %+v", p.UpdVisits)
+	}
+	if !p.Empty() {
+		t.Fatal("什么都没选，计划应当是空的")
+	}
+}
+
+// 冲突选了「跳过」也不动。
+func TestBuildMergePlanSkip(t *testing.T) {
+	vd := VisitDiff{Changed: []VisitConflict{
+		{Backup: Visit{SrcPK: 901}, DB: StoredVisit{SrcPK: 1, UUID: uuidA}},
+	}}
+	p := BuildMergePlan(vd, PlaceDiff{}, ActivityDiff{}, Choices{VisitClash: map[string]string{uuidA: PickSkip}})
+	if !p.Empty() {
+		t.Fatalf("跳过就不该产生改动: %+v", p)
+	}
+}
+
+// 活动改了名也要能用 UUID 当键对得上。
+func TestActivityKeyPrefersUUID(t *testing.T) {
+	if got := ActivityKey(StoredActivity{SrcPK: 1, Name: "上班", UUID: uuidC}); got != uuidC {
+		t.Fatalf("有 UUID 就用 UUID，实际 %q", got)
+	}
+	if got := ActivityKey(StoredActivity{SrcPK: 1, Name: "上班"}); got != "n:上班" {
+		t.Fatalf("没有 UUID 退回名称，实际 %q", got)
+	}
+}

internal/rond/parse.go

@@ -156,6 +156,13 @@ type Backup struct {
 	// RawRows 是各实体在 Core Data 里的完整原始行：「表名 -> Z_PK -> 列名 -> 值」。
 	// 站点只映射了其中一部分字段，留档让导出能逐列还原，不必依赖基线库补剩下的列。
 	RawRows map[string]map[int]map[string]any
+
+	// VisitUUID / ActivityUUID 是真机给每条到访、每个活动存的 16 字节 UUID（小写十六进制）。
+	// **这是跨备份唯一稳定的对齐键**：rond 每次导出/同步都会重排 Z_PK——实测两份备份里
+	// 822 条到访的 UUID 完全一致、Z_PK 100% 不同——所以「这份备份」与「库里的那一份」
+	// 之间只能按它对齐。地点/标签/交通方式没有 UUID，只能退到名称与坐标。
+	VisitUUID    map[int]string
+	ActivityUUID map[int]string
 }
 
 // Open 解压备份包到 dir，返回可用的 SQLite 连接。
@@ -465,9 +472,38 @@ func Parse(db *sql.DB) (*Backup, error) {
 	} else {
 		log.Printf("抓取原始行留档失败（导出将退回基线补列）: %v", rerr)
 	}
+	// 对齐键：导出不依赖它，但「两份数据比对」全靠它，缺了就只能放弃逐条对齐
+	if b.VisitUUID, err = uuidColumn(db, "ZVISIT", "ZIDENTIFIER_"); err != nil {
+		return nil, fmt.Errorf("读取到访 UUID: %w", err)
+	}
+	if b.ActivityUUID, err = uuidColumn(db, "ZACTIVITY", "ZUID_"); err != nil {
+		return nil, fmt.Errorf("读取活动 UUID: %w", err)
+	}
 	return b, nil
 }
 
+// uuidColumn 读出某表某一列的 UUID，返回 Z_PK -> 小写十六进制。
+// 列不存在（很老的备份）返回空表而不是错误；全零或空的当作没有。
+func uuidColumn(db *sql.DB, table, col string) (map[int]string, error) {
+	rows, err := db.Query(fmt.Sprintf(`SELECT Z_PK, hex(%s) FROM %s`, col, table))
+	if err != nil {
+		return nil, nil
+	}
+	defer rows.Close()
+	out := map[int]string{}
+	for rows.Next() {
+		var pk int
+		var h sql.NullString
+		if err := rows.Scan(&pk, &h); err != nil {
+			return nil, err
+		}
+		if h.Valid && strings.Trim(h.String, "0") != "" {
+			out[pk] = strings.ToLower(h.String)
+		}
+	}
+	return out, rows.Err()
+}
+
 // rawTables 是需要整行留档的 Core Data 表（站点管理的实体 + 标签分组）。
 var rawTables = []string{"ZLOCATION", "ZVISIT", "ZMOVEMENT", "ZHOURLYWEATHER", "ZACTIVITY", "ZTAG", "ZTAGGROUP", "ZTRANSPORT"}
 

internal/stats/stats.go

@@ -666,7 +666,8 @@ const placeCols = `p.id, COALESCE(p.name,''), COALESCE(p.poi_category,''), COALE
 	EXISTS (SELECT 1 FROM visits v3 WHERE v3.place_id=p.id AND v3.is_home),
 	EXISTS (SELECT 1 FROM visits v4 WHERE v4.place_id=p.id AND v4.is_work),
 	p.src_pk,
-	EXISTS (SELECT 1 FROM place_images pi WHERE pi.dataset_id=p.dataset_id AND pi.src_pk=p.src_pk)`
+	EXISTS (SELECT 1 FROM place_images pi WHERE pi.place_key =
+		to_char(p.lat,'FM999990.000000')||'|'||to_char(p.lon,'FM999990.000000'))`
 
 // PlaceCols 与 ScanPlace 配对，供包外构造只取单个地点的查询。
 const PlaceCols = placeCols
@@ -708,11 +709,12 @@ func (d DB) Places(ctx context.Context, f Filter, sortBy string, limit, offset i
 	args := append([]any{f.DatasetID}, inner.args...)
 	base := `FROM places p WHERE p.dataset_id = $1 AND EXISTS (SELECT 1 FROM visits v WHERE ` + inner.expr() + `)`
 	if f.Verdict != 0 {
-		// 结论存在 place_votes，按 src_pk 关联；占位符接在内层条件之后。
+		// 结论挂坐标键（换数据集也要跟得住），按本数据集的地点圈定范围；
-		// dataset_id 也要对上：src_pk 只在单个数据集内唯一。
+		// 占位符接在内层条件之后。
 		args = append(args, f.Verdict)
-		base += fmt.Sprintf(` AND EXISTS (SELECT 1 FROM place_votes pv
+		base += fmt.Sprintf(` AND EXISTS (SELECT 1 FROM place_votes pv WHERE pv.place_key =
-			WHERE pv.src_pk = p.src_pk AND pv.dataset_id = p.dataset_id AND pv.verdict = $%d)`, len(args))
+			to_char(p.lat,'FM999990.000000')||'|'||to_char(p.lon,'FM999990.000000')
+			AND pv.verdict = $%d)`, len(args))
 	}
 	q := `SELECT ` + placeCols + ` ` + base + ` ORDER BY ` + order + fmt.Sprintf(` LIMIT %d OFFSET %d`, limit, offset)
 

internal/votes/votes.go

@@ -2,14 +2,23 @@
 //   - place_votes         站长对地点的官方结论（单值）
 //   - place_visitor_votes 访客点赞 / 点踩（一人一票，可改可撤）
 //
-// 两者都按 rond 的地点 ID（src_pk）存储，重新上传备份、地点换了新 id 也不丢。
+// 站长的「官方结论」按**坐标键**（place_key）存储：src_pk 只在单个数据集内有效，
+// 换个数据集同编号就是另一个地点，结论会挂错人。
+// 访客票仍按 src_pk 存——那张表没有 dataset_id，无从判断票是投给哪个数据集的，
+// 迁移有歧义，留待单独处理。
 package votes
 
 import (
 	"context"
 	"database/sql"
+	"fmt"
 )
 
+// placeKeyExpr 把 places p 这一行的坐标换算成 place_key。
+// **必须与 Go 侧的 rond.PlaceCoordKey 以及 notes 包里的同款表达式逐位一致**：
+// fmt.Sprintf("%.6f|%.6f") ↔ to_char(x,'FM999990.000000')||'|'||to_char(y,'FM999990.000000')
+const placeKeyExpr = `to_char(p.lat,'FM999990.000000')||'|'||to_char(p.lon,'FM999990.000000')`
+
 // VerdictRecommend / VerdictAvoid 是官方结论的取值。
 const (
 	VerdictAvoid     = -1
@@ -24,11 +33,13 @@ type Tally struct {
 	Down int `json:"down"`
 }
 
-// Verdicts 返回某个数据集的站长结论：src_pk -> verdict(1/-1)。
+// Verdicts 返回某个数据集的站长结论：该数据集里的 src_pk -> verdict(1/-1)。
-// 必须按 dataset_id 过滤：src_pk 只在单个数据集内唯一。
 func (s *Store) Verdicts(ctx context.Context, datasetID int64) (map[int]int, error) {
 	out := map[int]int{}
-	rows, err := s.DB.QueryContext(ctx, `SELECT src_pk, verdict FROM place_votes WHERE dataset_id=$1`, datasetID)
+	rows, err := s.DB.QueryContext(ctx, `
+		SELECT p.src_pk, v.verdict FROM places p
+		JOIN place_votes v ON v.place_key = `+placeKeyExpr+`
+		WHERE p.dataset_id=$1 AND p.lat IS NOT NULL AND p.lon IS NOT NULL`, datasetID)
 	if err != nil {
 		return out, err
 	}
@@ -46,8 +57,9 @@ func (s *Store) Verdicts(ctx context.Context, datasetID int64) (map[int]int, err
 // Verdict 取单个地点的站长结论；未标注返回 0。
 func (s *Store) Verdict(ctx context.Context, datasetID int64, srcPK int) (int, error) {
 	var v int
-	err := s.DB.QueryRowContext(ctx,
+	err := s.DB.QueryRowContext(ctx, `SELECT v.verdict FROM place_votes v
-		`SELECT verdict FROM place_votes WHERE dataset_id=$1 AND src_pk=$2`, datasetID, srcPK).Scan(&v)
+		JOIN places p ON v.place_key = `+placeKeyExpr+`
+		WHERE p.dataset_id=$1 AND p.src_pk=$2`, datasetID, srcPK).Scan(&v)
 	if err == sql.ErrNoRows {
 		return 0, nil
 	}
@@ -57,24 +69,46 @@ func (s *Store) Verdict(ctx context.Context, datasetID int64, srcPK int) (int, e
 // SaveVerdict 设置站长结论；verdict 为 0 表示取消结论。
 func (s *Store) SaveVerdict(ctx context.Context, userID, datasetID int64, srcPK, verdict int) error {
 	if verdict == 0 {
-		_, err := s.DB.ExecContext(ctx,
+		_, err := s.DB.ExecContext(ctx, `DELETE FROM place_votes v USING places p
-			`DELETE FROM place_votes WHERE user_id=$1 AND dataset_id=$2 AND src_pk=$3`, userID, datasetID, srcPK)
+			WHERE v.user_id=$1 AND p.dataset_id=$2 AND p.src_pk=$3
+			  AND v.place_key = `+placeKeyExpr, userID, datasetID, srcPK)
 		return err
 	}
-	_, err := s.DB.ExecContext(ctx, `INSERT INTO place_votes (user_id, dataset_id, src_pk, verdict, updated_at)
+	// 先按坐标键算出这条地点该挂在哪，找不到该地点就什么也不写
-		VALUES ($1,$2,$3,$4,now())
+	_, err := s.DB.ExecContext(ctx, `INSERT INTO place_votes
-		ON CONFLICT (user_id, dataset_id, src_pk) DO UPDATE SET verdict=EXCLUDED.verdict, updated_at=now()`,
+			(user_id, place_key, dataset_id, src_pk, verdict, updated_at)
+		SELECT $1, `+placeKeyExpr+`, $2, $3, $4, now()
+		FROM places p
+		WHERE p.dataset_id=$2 AND p.src_pk=$3 AND p.lat IS NOT NULL AND p.lon IS NOT NULL
+		ON CONFLICT (user_id, place_key) DO UPDATE SET
+			verdict=EXCLUDED.verdict, dataset_id=EXCLUDED.dataset_id,
+			src_pk=EXCLUDED.src_pk, updated_at=now()`,
 		userID, datasetID, srcPK, verdict)
 	return err
 }
 
-// Tallies 返回全部地点的访客票数。票表规模很小（个人站点），一次读全更省事，
+// placeKeyOf 把某个数据集里的地点编号换算成坐标键——访客票也是挂在坐标上的，
-// 也避免给 pgx 传数组参数带来的类型歧义。
+// 换数据集之后票仍然跟着同一个地点。
-func (s *Store) Tallies(ctx context.Context) (map[int]Tally, error) {
+func (s *Store) placeKeyOf(ctx context.Context, datasetID int64, srcPK int) (string, error) {
+	var key string
+	err := s.DB.QueryRowContext(ctx, `SELECT `+placeKeyExpr+` FROM places p
+		WHERE p.dataset_id=$1 AND p.src_pk=$2 AND p.lat IS NOT NULL AND p.lon IS NOT NULL`,
+		datasetID, srcPK).Scan(&key)
+	if err == sql.ErrNoRows {
+		return "", fmt.Errorf("地点不存在或没有坐标")
+	}
+	return key, err
+}
+
+// Tallies 返回某个数据集里各地点的访客票数：src_pk -> Tally。
+// 票表规模很小（个人站点），一次读全更省事，也避免给 pgx 传数组参数带来的类型歧义。
+func (s *Store) Tallies(ctx context.Context, datasetID int64) (map[int]Tally, error) {
 	out := map[int]Tally{}
-	rows, err := s.DB.QueryContext(ctx, `SELECT src_pk,
+	rows, err := s.DB.QueryContext(ctx, `SELECT p.src_pk,
-		count(*) FILTER (WHERE vote=1), count(*) FILTER (WHERE vote=-1)
+		count(*) FILTER (WHERE vv.vote=1), count(*) FILTER (WHERE vv.vote=-1)
-		FROM place_visitor_votes GROUP BY src_pk`)
+		FROM places p JOIN place_visitor_votes vv ON vv.place_key = `+placeKeyExpr+`
+		WHERE p.dataset_id=$1 AND p.lat IS NOT NULL AND p.lon IS NOT NULL
+		GROUP BY p.src_pk`, datasetID)
 	if err != nil {
 		return out, err
 	}
@@ -91,21 +125,24 @@ func (s *Store) Tallies(ctx context.Context) (map[int]Tally, error) {
 }
 
 // Tally 取单个地点的访客票数。
-func (s *Store) Tally(ctx context.Context, srcPK int) (Tally, error) {
+func (s *Store) Tally(ctx context.Context, datasetID int64, srcPK int) (Tally, error) {
 	var t Tally
-	err := s.DB.QueryRowContext(ctx, `SELECT count(*) FILTER (WHERE vote=1), count(*) FILTER (WHERE vote=-1)
+	err := s.DB.QueryRowContext(ctx, `SELECT
-		FROM place_visitor_votes WHERE src_pk=$1`, srcPK).Scan(&t.Up, &t.Down)
+		count(*) FILTER (WHERE vv.vote=1), count(*) FILTER (WHERE vv.vote=-1)
+		FROM place_visitor_votes vv JOIN places p ON vv.place_key = `+placeKeyExpr+`
+		WHERE p.dataset_id=$1 AND p.src_pk=$2`, datasetID, srcPK).Scan(&t.Up, &t.Down)
 	return t, err
 }
 
 // VoterAll 返回该访客投过的全部票：src_pk -> vote，供地图一次性标注「我投的」。
-func (s *Store) VoterAll(ctx context.Context, voterKey string) (map[int]int, error) {
+func (s *Store) VoterAll(ctx context.Context, datasetID int64, voterKey string) (map[int]int, error) {
 	out := map[int]int{}
 	if voterKey == "" {
 		return out, nil
 	}
-	rows, err := s.DB.QueryContext(ctx,
+	rows, err := s.DB.QueryContext(ctx, `SELECT p.src_pk, vv.vote
-		`SELECT src_pk, vote FROM place_visitor_votes WHERE voter_key=$1`, voterKey)
+		FROM place_visitor_votes vv JOIN places p ON vv.place_key = `+placeKeyExpr+`
+		WHERE p.dataset_id=$1 AND vv.voter_key=$2`, datasetID, voterKey)
 	if err != nil {
 		return out, err
 	}
@@ -121,13 +158,15 @@ func (s *Store) VoterAll(ctx context.Context, voterKey string) (map[int]int, err
 }
 
 // Voter 返回该访客对某地点的既有投票（1/-1/0）。voterKey 为空表示拿不到身份。
-func (s *Store) Voter(ctx context.Context, srcPK int, voterKey string) int {
+func (s *Store) Voter(ctx context.Context, datasetID int64, srcPK int, voterKey string) int {
 	if voterKey == "" {
 		return 0
 	}
 	var v int
-	if err := s.DB.QueryRowContext(ctx,
+	if err := s.DB.QueryRowContext(ctx, `SELECT vv.vote FROM place_visitor_votes vv
-		`SELECT vote FROM place_visitor_votes WHERE src_pk=$1 AND voter_key=$2`, srcPK, voterKey).Scan(&v); err != nil {
+		JOIN places p ON vv.place_key = `+placeKeyExpr+`
+		WHERE p.dataset_id=$1 AND p.src_pk=$2 AND vv.voter_key=$3`,
+		datasetID, srcPK, voterKey).Scan(&v); err != nil {
 		return 0
 	}
 	return v
@@ -135,30 +174,35 @@ func (s *Store) Voter(ctx context.Context, srcPK int, voterKey string) int {
 
 // Cast 记录访客投票：未投过则新增；投同一票则撤销（再点一次取消）；投另一票则改为该票。
 // 返回更新后的票数与该访客最终的选择。
-func (s *Store) Cast(ctx context.Context, srcPK int, voterKey string, vote int) (Tally, int, error) {
+func (s *Store) Cast(ctx context.Context, datasetID int64, srcPK int, voterKey string, vote int) (Tally, int, error) {
+	key, err := s.placeKeyOf(ctx, datasetID, srcPK)
+	if err != nil {
+		return Tally{}, 0, err
+	}
 	var cur int
-	err := s.DB.QueryRowContext(ctx,
+	err = s.DB.QueryRowContext(ctx,
-		`SELECT vote FROM place_visitor_votes WHERE src_pk=$1 AND voter_key=$2`, srcPK, voterKey).Scan(&cur)
+		`SELECT vote FROM place_visitor_votes WHERE place_key=$1 AND voter_key=$2`, key, voterKey).Scan(&cur)
 	switch {
 	case err == sql.ErrNoRows:
 		_, err = s.DB.ExecContext(ctx,
-			`INSERT INTO place_visitor_votes (src_pk, voter_key, vote) VALUES ($1,$2,$3)`, srcPK, voterKey, vote)
+			`INSERT INTO place_visitor_votes (place_key, voter_key, vote, src_pk) VALUES ($1,$2,$3,$4)`,
+			key, voterKey, vote, srcPK)
 		cur = vote
 	case err != nil:
 		return Tally{}, 0, err
 	case cur == vote:
 		_, err = s.DB.ExecContext(ctx,
-			`DELETE FROM place_visitor_votes WHERE src_pk=$1 AND voter_key=$2`, srcPK, voterKey)
+			`DELETE FROM place_visitor_votes WHERE place_key=$1 AND voter_key=$2`, key, voterKey)
 		cur = 0
 	default:
 		_, err = s.DB.ExecContext(ctx,
-			`UPDATE place_visitor_votes SET vote=$3, updated_at=now() WHERE src_pk=$1 AND voter_key=$2`,
+			`UPDATE place_visitor_votes SET vote=$3, src_pk=$4, updated_at=now()
-			srcPK, voterKey, vote)
+			  WHERE place_key=$1 AND voter_key=$2`, key, voterKey, vote, srcPK)
 		cur = vote
 	}
 	if err != nil {
 		return Tally{}, 0, err
 	}
-	t, err := s.Tally(ctx, srcPK)
+	t, err := s.Tally(ctx, datasetID, srcPK)
 	return t, cur, err
 }

internal/web/backup_diff.go

@@ -0,0 +1,346 @@
+package web
+
+import (
+	"context"
+	"database/sql"
+	"encoding/base64"
+	"encoding/hex"
+	"fmt"
+	"io"
+	"log"
+	"net/http"
+	"os"
+	"path/filepath"
+	"strings"
+	"time"
+
+	"rond-with-you/internal/ingest"
+	"rond-with-you/internal/rond"
+)
+
+// rondbackup 的差异预演：把上传的备份与当前展示的数据集按稳定键对齐，只读地摆出
+// 新增 / 仅库里有 / 冲突三类，**不写任何数据**。合并执行是下一步的事。
+
+const backupStashExt = ".rondbackup"
+
+// diffListLimit 是每类差异在页面上最多列出的条数。867 条全铺出来既慢又没人看，
+// 超过就只给前若干条并注明。
+const diffListLimit = 200
+
+func (s *Server) backupStashDir() string {
+	return filepath.Join(s.cfg.DataDir, "backup-staging")
+}
+
+// adminBackupPreview 收下备份、暂存，跳到差异页。这里不校验备份内容——
+// 差异页反正是要解析一遍的，失败时让它报错即可，免得同一份包解两次。
+func (s *Server) adminBackupPreview(w http.ResponseWriter, r *http.Request) {
+	r.Body = http.MaxBytesReader(w, r.Body, maxUploadBytes+1<<20)
+	if err := r.ParseMultipartForm(32 << 20); err != nil {
+		s.adminFlash(w, r, "err", "读取上传内容失败："+err.Error())
+		return
+	}
+	file, hdr, err := r.FormFile("backup")
+	if err != nil {
+		s.adminFlash(w, r, "err", "请选择要分析的 .rondbackup 文件")
+		return
+	}
+	defer file.Close()
+	name := filepath.Base(hdr.Filename)
+	lower := strings.ToLower(name)
+	if !strings.HasSuffix(lower, ".rondbackup") && !strings.HasSuffix(lower, ".zip") {
+		s.adminFlash(w, r, "err", "文件类型不正确，请上传 rond 导出的 .rondbackup 备份")
+		return
+	}
+	data, err := io.ReadAll(io.LimitReader(file, maxUploadBytes+1))
+	if err != nil {
+		s.adminFlash(w, r, "err", "读取文件失败："+err.Error())
+		return
+	}
+	if int64(len(data)) > maxUploadBytes {
+		s.adminFlash(w, r, "err", "备份文件过大，疑似不是 rond 备份")
+		return
+	}
+	token, err := stashPut(s.backupStashDir(), backupStashExt, data)
+	if err != nil {
+		s.serverError(w, r, err)
+		return
+	}
+	http.Redirect(w, r, "/admin/preview/"+token, http.StatusSeeOther)
+}
+
+// adminBackupPreviewPage 渲染差异页。每次都重新算：库里的数据随时可能被别处改掉。
+func (s *Server) adminBackupPreviewPage(w http.ResponseWriter, r *http.Request) {
+	ctx := r.Context()
+	p, err := s.pageBase(r, "admin", "备份差异预览")
+	if err != nil {
+		s.serverError(w, r, err)
+		return
+	}
+	token := r.PathValue("token")
+	path, ok := stashPath(s.backupStashDir(), backupStashExt, token)
+	if !ok {
+		s.adminFlash(w, r, "err", "预览链接无效，请重新上传备份")
+		return
+	}
+	if _, err := os.Stat(path); err != nil {
+		s.adminFlash(w, r, "err", "这次预览已过期，请重新上传备份")
+		return
+	}
+	ds, err := s.datasetFor(ctx)
+	if err != nil {
+		s.serverError(w, r, err)
+		return
+	}
+	if ds == nil {
+		s.adminFlash(w, r, "err", "还没有可比较的数据集，请先直接导入一份备份")
+		return
+	}
+
+	tmp, err := ingest.TempDir(s.cfg.DataDir, "preview")
+	if err != nil {
+		s.serverError(w, r, err)
+		return
+	}
+	defer os.RemoveAll(tmp)
+	sqlDB, err := rond.Open(path, tmp)
+	if err != nil {
+		s.adminFlash(w, r, "err", "解析备份失败："+err.Error())
+		return
+	}
+	backup, perr := rond.Parse(sqlDB)
+	sqlDB.Close()
+	if perr != nil {
+		s.adminFlash(w, r, "err", "读取备份数据失败："+perr.Error())
+		return
+	}
+
+	storedVisits, err := s.loadStoredVisits(ctx, ds.ID)
+	if err != nil {
+		s.serverError(w, r, err)
+		return
+	}
+	storedPlaces, err := s.loadStoredPlaces(ctx, ds.ID)
+	if err != nil {
+		s.serverError(w, r, err)
+		return
+	}
+	storedActs, err := s.loadStoredActivities(ctx, ds.ID)
+	if err != nil {
+		s.serverError(w, r, err)
+		return
+	}
+
+	vd := rond.DiffVisits(storedVisits, backup)
+	pd := rond.DiffPlaces(storedPlaces, backup)
+	ad := rond.DiffActivities(storedActs, backup)
+
+	d := BackupDiffData{
+		Page: p, Token: token,
+		DatasetName: ds.Name,
+		VisitCounts: rond.VisitCounts(vd),
+		PlaceCounts: rond.PlaceCounts(pd),
+		ActCounts:   rond.ActivityCounts(ad),
+		PlaceAdded:  limitSlice(pd.Added, diffListLimit),
+		PlaceGone:   limitSlice(pd.Removed, diffListLimit),
+		PlaceClash:  limitSlice(pd.Changed, diffListLimit),
+		ActAdded:    limitSlice(ad.Added, diffListLimit),
+		ActGone:     limitSlice(ad.Removed, diffListLimit),
+		ActClash:    limitSlice(ad.Changed, diffListLimit),
+
+		BackupVisits: len(backup.Visits), BackupPlaces: len(backup.Locations),
+		BackupActs: len(backup.Activities), BackupMovements: len(backup.Movements),
+		BackupWeather: len(backup.Weather), BackupRaw: backup.RawVisitNum,
+		StoredVisits: len(storedVisits), StoredPlaces: len(storedPlaces),
+		StoredActs: len(storedActs),
+	}
+	d.VisitAdded, d.VisitGone, d.VisitClash = visitRows(vd, backup, diffListLimit)
+	d.Truncated = anyTruncated(vd, pd, ad)
+	d.StoredMovements, d.StoredWeather, err = s.countOther(ctx, ds.ID)
+	if err != nil {
+		s.serverError(w, r, err)
+		return
+	}
+	d.Identical = d.VisitCounts.Added+d.VisitCounts.Removed+d.VisitCounts.Changed+
+		d.PlaceCounts.Added+d.PlaceCounts.Removed+d.PlaceCounts.Changed+
+		d.ActCounts.Added+d.ActCounts.Removed+d.ActCounts.Changed == 0
+	s.render(w, "admin/backup-preview", d)
+}
+
+// visitRows 把三类到访差异摊平成展示行。备份里的地点/活动只有编号，要借备份自己的
+// 表翻成名称；库里那侧的名称在加载时就一并取出来了。
+func visitRows(vd rond.VisitDiff, b *rond.Backup, limit int) (added, gone, clash []VisitRow) {
+	place, act := map[int]string{}, map[int]string{}
+	for _, l := range b.Locations {
+		place[l.SrcPK] = placeLabel(l.Name, l.Lat, l.Lon)
+	}
+	for _, a := range b.Activities {
+		act[a.SrcPK] = a.Name
+	}
+	fromBackup := func(v rond.Visit) VisitRow {
+		r := VisitRow{Arrival: v.Arrival, Departure: v.Departure, Remark: v.Remark, Emoji: v.Emoji}
+		if v.LocationSrcPK != nil {
+			r.Place = place[*v.LocationSrcPK]
+		}
+		if v.ActivitySrcPK != nil {
+			r.Activity = act[*v.ActivitySrcPK]
+		}
+		return r
+	}
+	for _, v := range limitSlice(vd.Added, limit) {
+		added = append(added, fromBackup(v))
+	}
+	for _, sv := range limitSlice(vd.Removed, limit) {
+		gone = append(gone, VisitRow{SrcPK: sv.SrcPK, Arrival: sv.Arrival, Departure: sv.Departure,
+			Place: sv.PlaceName, Activity: sv.ActivityName, Remark: sv.Remark, Emoji: sv.Emoji,
+			UserAdded: sv.UserAdded})
+	}
+	for _, c := range limitSlice(vd.Changed, limit) {
+		r := fromBackup(c.Backup)
+		r.Key = c.DB.UUID
+		r.UserAdded = c.DB.UserAdded
+		r.Fields = c.Fields
+		clash = append(clash, r)
+	}
+	return
+}
+
+func placeLabel(name string, lat, lon float64) string {
+	if name != "" {
+		return name
+	}
+	return fmt.Sprintf("%.5f, %.5f", lat, lon)
+}
+
+// anyTruncated 报告是否有哪一类差异多到被截断了。
+func anyTruncated(vd rond.VisitDiff, pd rond.PlaceDiff, ad rond.ActivityDiff) bool {
+	for _, n := range []int{len(vd.Added), len(vd.Removed), len(vd.Changed),
+		len(pd.Added), len(pd.Removed), len(pd.Changed),
+		len(ad.Added), len(ad.Removed), len(ad.Changed)} {
+		if n > diffListLimit {
+			return true
+		}
+	}
+	return false
+}
+
+func limitSlice[T any](in []T, n int) []T {
+	if len(in) <= n {
+		return in
+	}
+	return in[:n]
+}
+
+func (s *Server) countOther(ctx context.Context, datasetID int64) (movements, weather int, err error) {
+	err = s.db.QueryRowContext(ctx, `SELECT
+		(SELECT count(*) FROM movements WHERE dataset_id=$1),
+		(SELECT count(*) FROM weather WHERE dataset_id=$1)`, datasetID).Scan(&movements, &weather)
+	return
+}
+
+// loadStoredVisits 读出该数据集的全部到访，并把原始行留档里的 UUID 解出来当对齐键。
+// 没有留档的行就是站点新建的（真机不会给它 UUID），对齐键留空。
+func (s *Server) loadStoredVisits(ctx context.Context, datasetID int64) ([]rond.StoredVisit, error) {
+	rows, err := s.db.QueryContext(ctx, `
+		SELECT v.src_pk, v.arrival, v.departure, COALESCE(v.remark,''), COALESCE(v.emoji,''),
+		       v.bookmarked, v.is_user_added, COALESCE(p.src_pk,0),
+		       COALESCE(p.name,''), COALESCE(p.lat,0), COALESCE(p.lon,0), COALESCE(a.name,''),
+		       COALESCE(er.raw #>> '{ZIDENTIFIER_,$blob}','')
+		FROM visits v
+		LEFT JOIN places p ON p.id = v.place_id
+		LEFT JOIN activities a ON a.id = v.activity_id
+		LEFT JOIN entity_raw er ON er.dataset_id = v.dataset_id
+			AND er.entity = 'ZVISIT' AND er.src_pk = v.src_pk
+		WHERE v.dataset_id = $1`, datasetID)
+	if err != nil {
+		return nil, err
+	}
+	defer rows.Close()
+	var out []rond.StoredVisit
+	for rows.Next() {
+		var sv rond.StoredVisit
+		var arr time.Time
+		var dep sql.NullTime
+		var placePK int
+		var placeName string
+		var lat, lon float64
+		var b64 string
+		if err := rows.Scan(&sv.SrcPK, &arr, &dep, &sv.Remark, &sv.Emoji, &sv.Bookmarked,
+			&sv.UserAdded, &placePK, &placeName, &lat, &lon, &sv.ActivityName, &b64); err != nil {
+			return nil, err
+		}
+		sv.Arrival = &arr
+		if dep.Valid {
+			sv.Departure = &dep.Time
+		}
+		sv.PlaceName = placeName
+		// 没有坐标的地点不能都落到 "0.000000|0.000000" 上，否则两个地点会互相认领
+		if placePK > 0 && (lat != 0 || lon != 0) {
+			sv.PlaceKey = rond.PlaceCoordKey(lat, lon)
+		}
+		sv.UUID = uuidFromBase64(b64)
+		out = append(out, sv)
+	}
+	return out, rows.Err()
+}
+
+func (s *Server) loadStoredPlaces(ctx context.Context, datasetID int64) ([]rond.StoredPlace, error) {
+	rows, err := s.db.QueryContext(ctx, `SELECT src_pk, COALESCE(name,''), COALESCE(lat,0), COALESCE(lon,0),
+		COALESCE(province,''), COALESCE(city,''), COALESCE(poi_category,''), visit_count
+		FROM places WHERE dataset_id=$1`, datasetID)
+	if err != nil {
+		return nil, err
+	}
+	defer rows.Close()
+	var out []rond.StoredPlace
+	for rows.Next() {
+		var sp rond.StoredPlace
+		if err := rows.Scan(&sp.SrcPK, &sp.Name, &sp.Lat, &sp.Lon,
+			&sp.Province, &sp.City, &sp.POICategory, &sp.VisitCount); err != nil {
+			return nil, err
+		}
+		if sp.Lat != 0 || sp.Lon != 0 {
+			sp.Key = rond.PlaceCoordKey(sp.Lat, sp.Lon)
+		}
+		out = append(out, sp)
+	}
+	return out, rows.Err()
+}
+
+// loadStoredActivities 读活动类型；UUID 同样从留档里取，用于识别「改了名但其实是同一个」。
+func (s *Server) loadStoredActivities(ctx context.Context, datasetID int64) ([]rond.StoredActivity, error) {
+	rows, err := s.db.QueryContext(ctx, `SELECT a.src_pk, a.name,
+		COALESCE(er.raw #>> '{ZUID_,$blob}','')
+		FROM activities a
+		LEFT JOIN entity_raw er ON er.dataset_id = a.dataset_id
+			AND er.entity = 'ZACTIVITY' AND er.src_pk = a.src_pk
+		WHERE a.dataset_id=$1`, datasetID)
+	if err != nil {
+		return nil, err
+	}
+	defer rows.Close()
+	var out []rond.StoredActivity
+	for rows.Next() {
+		var sa rond.StoredActivity
+		var b64 string
+		if err := rows.Scan(&sa.SrcPK, &sa.Name, &b64); err != nil {
+			return nil, err
+		}
+		sa.UUID = uuidFromBase64(b64)
+		out = append(out, sa)
+	}
+	return out, rows.Err()
+}
+
+// uuidFromBase64 把留档里的 $blob（base64 的 16 字节 UUID）转成小写十六进制，
+// 好跟备份侧 hex(ZIDENTIFIER_) 的写法对上。
+func uuidFromBase64(s string) string {
+	if s == "" {
+		return ""
+	}
+	b, err := base64.StdEncoding.DecodeString(s)
+	if err != nil || len(b) != 16 {
+		log.Printf("留档里的 UUID 不是 16 字节，忽略: %q", s)
+		return ""
+	}
+	return hex.EncodeToString(b)
+}

internal/web/backup_diff_test.go

@@ -0,0 +1,164 @@
+package web
+
+import (
+	"bytes"
+	"mime/multipart"
+	"net/http"
+	"net/http/httptest"
+	"os"
+	"path/filepath"
+	"regexp"
+	"strconv"
+	"strings"
+	"testing"
+)
+
+// previewBackup 走真实的上传处理函数：POST → 303 → GET 差异页，返回渲染结果。
+func previewBackup(t *testing.T, f *movementFixture, path string) string {
+	t.Helper()
+	_, page := previewBackupToken(t, f, path)
+	return page
+}
+
+// previewBackupToken 同上，但把令牌也交出来，供后续的合并步骤使用。
+func previewBackupToken(t *testing.T, f *movementFixture, path string) (string, string) {
+	t.Helper()
+	data, err := os.ReadFile(path)
+	if err != nil {
+		t.Fatalf("读取 %s 失败: %v", path, err)
+	}
+	var buf bytes.Buffer
+	mw := multipart.NewWriter(&buf)
+	fw, err := mw.CreateFormFile("backup", filepath.Base(path))
+	if err != nil {
+		t.Fatalf("构造上传表单失败: %v", err)
+	}
+	if _, err := fw.Write(data); err != nil {
+		t.Fatalf("写入上传内容失败: %v", err)
+	}
+	mw.Close()
+
+	rec := httptest.NewRecorder()
+	req := httptest.NewRequest("POST", "/admin/preview", &buf)
+	req.Header.Set("Content-Type", mw.FormDataContentType())
+	f.srv.adminBackupPreview(rec, req.WithContext(f.ctx))
+	if rec.Code != http.StatusSeeOther {
+		t.Fatalf("上传应跳转到差异页: code=%d body=%s", rec.Code, rec.Body.String())
+	}
+	loc := rec.Header().Get("Location")
+	token := strings.TrimPrefix(loc, "/admin/preview/")
+	if token == loc || len(token) != stashTokenLen {
+		t.Fatalf("差异页地址不对: %q", loc)
+	}
+
+	rec = httptest.NewRecorder()
+	req = httptest.NewRequest("GET", loc, nil).WithContext(f.ctx)
+	req.SetPathValue("token", token)
+	f.srv.adminBackupPreviewPage(rec, req)
+	if rec.Code != http.StatusOK {
+		t.Fatalf("差异页渲染失败: code=%d body=%s", rec.Code, rec.Body.String())
+	}
+	return token, rec.Body.String()
+}
+
+// visitCounts 从概览表里取出「到访」那一行的 (备份新增, 仅站内有, 冲突)。
+// 不能全页 Contains 数字——地点行也有同样的 data-label，会张冠李戴。
+func visitCounts(t *testing.T, page string) (added, gone, clash int) {
+	t.Helper()
+	row := regexp.MustCompile(`(?s)<td>到访</td>(.*?)</tr>`).FindStringSubmatch(page)
+	if row == nil {
+		t.Fatal("概览表里找不到「到访」行")
+	}
+	nums := regexp.MustCompile(`data-label="(备份新增|仅站内有|冲突)">(\d+)<`).FindAllStringSubmatch(row[1], -1)
+	if len(nums) != 3 {
+		t.Fatalf("到访行应有三个计数，实际 %d", len(nums))
+	}
+	for _, n := range nums {
+		v, _ := strconv.Atoi(n[2])
+		switch n[1] {
+		case "备份新增":
+			added = v
+		case "仅站内有":
+			gone = v
+		case "冲突":
+			clash = v
+		}
+	}
+	return
+}
+
+// 同一份备份再传一次：UUID 对得上、字段也没变，到访应当一条不差。
+//
+// 这条也顺带钉住「按 UUID 而不是编号对齐」：库内那些行的编号与备份里完全不同
+// （rond 重排过），只按编号比会让 800 多条全变冲突。
+//
+// 只断言到访，不断言「完全一致」整句：导入后站点会反查补全地点（改名称/地址），
+// 地点层面因此真的存在差异，那是预期行为，不该由这个用例来管。
+func TestBackupDiffIdentical(t *testing.T) {
+	f := newMovementFixture(t)
+	page := previewBackup(t, f, f.src)
+	if a, g, c := visitCounts(t, page); a != 0 || g != 0 || c != 0 {
+		t.Fatalf("同一份备份的到访不该有差异: 新增 %d 仅站内有 %d 冲突 %d", a, g, c)
+	}
+}
+
+// 站内改过备注、又补录了一条到访，差异页要把这两件事分别认出来。
+//
+// 这里的关键是「按 UUID 对齐」：库里那些行的 Z_PK 与备份里完全不同
+// （rond 重排过），只按编号比会把 800 多条全判成冲突。
+func TestBackupDiffDetectsSiteEdits(t *testing.T) {
+	f := newMovementFixture(t)
+
+	var pk int
+	if err := f.pg.QueryRowContext(f.ctx, `UPDATE visits SET remark='站点改过的备注'
+		WHERE id = (SELECT id FROM visits WHERE dataset_id=$1 ORDER BY src_pk LIMIT 1)
+		RETURNING src_pk`, f.dsID).Scan(&pk); err != nil {
+		t.Fatalf("改备注失败: %v", err)
+	}
+	if _, err := f.pg.ExecContext(f.ctx, `INSERT INTO visits
+		(dataset_id, src_pk, arrival, departure, is_user_added, remark)
+		VALUES ($1, 999999, now(), now(), true, '站点补录的一条')`, f.dsID); err != nil {
+		t.Fatalf("插入补录到访失败: %v", err)
+	}
+
+	page := previewBackup(t, f, f.src)
+	// 「站点改过的备注」只可能从冲突行的字段差异里渲染出来；「站内补录」是那条补录行的来源标记
+	for _, want := range []string{"备份差异预览", "站点改过的备注", "站点补录的一条", ">站内补录<"} {
+		if !strings.Contains(page, want) {
+			t.Errorf("差异页缺少 %q", want)
+		}
+	}
+	a, g, c := visitCounts(t, page)
+	if c != 1 {
+		t.Errorf("改过一条备注，到访冲突数应为 1，实际 %d", c)
+	}
+	if g != 1 {
+		t.Errorf("补录了一条，到访「仅站内有」应为 1，实际 %d", g)
+	}
+	if a != 0 {
+		t.Errorf("备份里没有多出来的到访，实际 %d", a)
+	}
+}
+
+// 差异页是只读的：渲染前后库里的行数必须一模一样。
+func TestBackupDiffPreviewWritesNothing(t *testing.T) {
+	f := newMovementFixture(t)
+
+	count := func() (visits, places, raw int) {
+		t.Helper()
+		if err := f.pg.QueryRowContext(f.ctx, `SELECT
+			(SELECT count(*) FROM visits WHERE dataset_id=$1),
+			(SELECT count(*) FROM places WHERE dataset_id=$1),
+			(SELECT count(*) FROM entity_raw WHERE dataset_id=$1)`, f.dsID).
+			Scan(&visits, &places, &raw); err != nil {
+			t.Fatalf("统计失败: %v", err)
+		}
+		return
+	}
+	v0, p0, r0 := count()
+	previewBackup(t, f, f.src)
+	v1, p1, r1 := count()
+	if v0 != v1 || p0 != p1 || r0 != r1 {
+		t.Fatalf("差异页不该写库: 到访 %d→%d 地点 %d→%d 留档 %d→%d", v0, v1, p0, p1, r0, r1)
+	}
+}

internal/web/backup_merge.go

@@ -0,0 +1,753 @@
+package web
+
+import (
+	"context"
+	"database/sql"
+	"encoding/json"
+	"fmt"
+	"log"
+	"net/http"
+	"os"
+	"strconv"
+	"strings"
+
+	"rond-with-you/internal/geo"
+	"rond-with-you/internal/ingest"
+	"rond-with-you/internal/rond"
+)
+
+// 差异页确认后的合并执行。
+//
+// 全部改动在一个事务里完成：半合并的数据集比没合并更难收拾（比如地点建了、
+// 到访没建，地图上就多一个永远没人去的点）。删除不在这里——删地点会级联删掉
+// 它的全部到访，那件事单独再议。
+//
+// 编号是这里最容易出错的地方：**库里那侧的编号空间才是唯一有效的**。
+// 新插入的行拿 nextSrcPK 发的新号，于是位移的 from_visit_src、天气的 visit_src
+// 都必须写「库里的新号」，而不是备份里的原号。
+
+type mergeStats struct {
+	Places, Activities, Tags      int
+	Visits, Movements, Weather    int
+	UpdPlaces, UpdActs, UpdVisits int
+	DelPlaces, DelActs, DelVisits int
+}
+
+func (s *Server) adminBackupMerge(w http.ResponseWriter, r *http.Request) {
+	ctx := r.Context()
+	ds, err := s.datasetFor(ctx)
+	if err != nil {
+		s.serverError(w, r, err)
+		return
+	}
+	if ds == nil {
+		s.adminFlash(w, r, "err", "没有可合并的数据集")
+		return
+	}
+	token := r.PathValue("token")
+	path, ok := stashPath(s.backupStashDir(), backupStashExt, token)
+	if !ok {
+		s.adminFlash(w, r, "err", "合并链接无效，请重新上传备份")
+		return
+	}
+	if _, err := os.Stat(path); err != nil {
+		s.adminFlash(w, r, "err", "这次预览已过期，请重新上传备份")
+		return
+	}
+	if err := r.ParseForm(); err != nil {
+		s.serverError(w, r, err)
+		return
+	}
+	backup, err := s.parseBackupFile(path)
+	if err != nil {
+		s.adminFlash(w, r, "err", err.Error())
+		return
+	}
+	visits, places, acts, err := s.loadStoredAll(ctx, ds.ID)
+	if err != nil {
+		s.serverError(w, r, err)
+		return
+	}
+
+	// 重新算一遍差异再执行：从渲染差异页到点下按钮之间，库可能已经被别处改过
+	vd := rond.DiffVisits(visits, backup)
+	pd := rond.DiffPlaces(places, backup)
+	ad := rond.DiffActivities(acts, backup)
+	addNew := r.PostFormValue("add_new") == "1"
+	plan := rond.BuildMergePlan(vd, pd, ad, rond.Choices{
+		AddVisits: addNew, AddPlaces: addNew, AddActs: addNew,
+		VisitClash: pickForm(r, "vc_"),
+		PlaceClash: pickForm(r, "pc_"),
+		ActClash:   pickForm(r, "ac_"),
+		DelVisits:  pickIntForm(r, "dv_"),
+		DelPlaces:  pickIntForm(r, "dp_"),
+		DelActs:    pickIntForm(r, "da_"),
+	})
+	if plan.Empty() {
+		s.adminFlash(w, r, "ok", "按当前的选择没有要写入的改动，数据未变")
+		return
+	}
+	st, err := s.applyMergePlan(ctx, ds, backup, plan, visits)
+	if err != nil {
+		log.Printf("合并失败: %v", err)
+		s.adminFlash(w, r, "err", "合并失败，已整体回滚、数据未变："+err.Error())
+		return
+	}
+	stashDrop(s.backupStashDir(), backupStashExt, token)
+
+	msg := fmt.Sprintf("合并完成：新增 %d 个地点 / %d 个活动 / %d 条到访；更新 %d 个地点 / %d 个活动 / %d 条到访",
+		st.Places, st.Activities, st.Visits, st.UpdPlaces, st.UpdActs, st.UpdVisits)
+	if st.DelVisits+st.DelActs+st.DelPlaces > 0 {
+		msg += fmt.Sprintf("；删除 %d 条到访 / %d 个活动 / %d 个地点", st.DelVisits, st.DelActs, st.DelPlaces)
+	}
+	if st.Tags > 0 {
+		msg += fmt.Sprintf("；顺带建了 %d 个标签", st.Tags)
+	}
+	if st.Movements+st.Weather > 0 {
+		msg += fmt.Sprintf("；随到访带入 %d 条位移、%d 条天气", st.Movements, st.Weather)
+	}
+	s.adminFlash(w, r, "ok", msg)
+}
+
+// pickIntForm 收集「前缀 + 整数」形式的勾选，比如 dv_825=1（要删除的到访）。
+func pickIntForm(r *http.Request, prefix string) map[int]bool {
+	out := map[int]bool{}
+	for k, vs := range r.PostForm {
+		if len(vs) == 0 || vs[0] == "" || !strings.HasPrefix(k, prefix) {
+			continue
+		}
+		if n, err := strconv.Atoi(strings.TrimPrefix(k, prefix)); err == nil {
+			out[n] = true
+		}
+	}
+	return out
+}
+
+// pickForm 收集「前缀 + 键」形式的逐条选择，比如 vc_<uuid>=backup。
+func pickForm(r *http.Request, prefix string) map[string]string {
+	out := map[string]string{}
+	for k, vs := range r.PostForm {
+		if len(vs) == 0 || !strings.HasPrefix(k, prefix) {
+			continue
+		}
+		out[strings.TrimPrefix(k, prefix)] = vs[0]
+	}
+	return out
+}
+
+func (s *Server) loadStoredAll(ctx context.Context, dsID int64) ([]rond.StoredVisit, []rond.StoredPlace, []rond.StoredActivity, error) {
+	visits, err := s.loadStoredVisits(ctx, dsID)
+	if err != nil {
+		return nil, nil, nil, err
+	}
+	places, err := s.loadStoredPlaces(ctx, dsID)
+	if err != nil {
+		return nil, nil, nil, err
+	}
+	acts, err := s.loadStoredActivities(ctx, dsID)
+	if err != nil {
+		return nil, nil, nil, err
+	}
+	return visits, places, acts, nil
+}
+
+func (s *Server) parseBackupFile(path string) (*rond.Backup, error) {
+	tmp, err := ingest.TempDir(s.cfg.DataDir, "merge")
+	if err != nil {
+		return nil, err
+	}
+	defer os.RemoveAll(tmp)
+	db, err := rond.Open(path, tmp)
+	if err != nil {
+		return nil, fmt.Errorf("解析备份失败：%w", err)
+	}
+	defer db.Close()
+	b, err := rond.Parse(db)
+	if err != nil {
+		return nil, fmt.Errorf("读取备份数据失败：%w", err)
+	}
+	return b, nil
+}
+
+func (s *Server) applyMergePlan(ctx context.Context, ds *Dataset, b *rond.Backup, plan rond.MergePlan,
+	storedVisits []rond.StoredVisit) (*mergeStats, error) {
+	st := &mergeStats{}
+	err := s.withTx(ctx, func(ex execer) error {
+		placeID, err := s.mergePlaces(ctx, ex, ds.ID, b, plan, st)
+		if err != nil {
+			return err
+		}
+		actID, err := s.mergeActivities(ctx, ex, ds.ID, b, plan, st)
+		if err != nil {
+			return err
+		}
+		tagID, err := s.mergeTags(ctx, ex, ds.ID, b, st)
+		if err != nil {
+			return err
+		}
+		if err := s.mergeVisits(ctx, ex, ds.ID, b, plan, placeID, actID, tagID, storedVisits, st); err != nil {
+			return err
+		}
+		// 删除放在最后：先让新增/更新落定，再按最终状态删
+		if err := s.applyDeletions(ctx, ex, ds.ID, plan, st); err != nil {
+			return err
+		}
+		return s.recountPlaces(ctx, ex, ds.ID)
+	})
+	if err != nil {
+		return nil, err
+	}
+	return st, nil
+}
+
+// mergePlaces 先把备份地点映射到库里的 places.id（已存在的直接映射），
+// 再处理冲突更新与新增，返回「备份地点编号 -> 库 id」。
+func (s *Server) mergePlaces(ctx context.Context, ex execer, dsID int64, b *rond.Backup,
+	plan rond.MergePlan, st *mergeStats) (map[int]int64, error) {
+	byCoord, byName := map[string]int64{}, map[string]int64{}
+	rows, err := ex.QueryContext(ctx, `SELECT id, COALESCE(name,''), COALESCE(lat,0), COALESCE(lon,0)
+		FROM places WHERE dataset_id=$1`, dsID)
+	if err != nil {
+		return nil, err
+	}
+	for rows.Next() {
+		var id int64
+		var name string
+		var lat, lon float64
+		if err := rows.Scan(&id, &name, &lat, &lon); err != nil {
+			rows.Close()
+			return nil, err
+		}
+		if lat != 0 || lon != 0 {
+			byCoord[rond.PlaceCoordKey(lat, lon)] = id
+		}
+		if _, dup := byName[name]; !dup && name != "" {
+			byName[name] = id
+		}
+	}
+	rows.Close()
+	if err := rows.Err(); err != nil {
+		return nil, err
+	}
+
+	placeID := map[int]int64{}
+	for _, l := range b.Locations {
+		if l.Lat != 0 || l.Lon != 0 {
+			if id, ok := byCoord[rond.PlaceCoordKey(l.Lat, l.Lon)]; ok {
+				placeID[l.SrcPK] = id
+				continue
+			}
+		}
+		if l.Name != "" {
+			if id, ok := byName[l.Name]; ok {
+				placeID[l.SrcPK] = id
+			}
+		}
+	}
+
+	for _, up := range plan.UpdPlaces {
+		id := placeID[up.L.SrcPK]
+		if id == 0 {
+			id = byCoord[up.CoordKey]
+		}
+		if id == 0 {
+			id = byName[up.L.Name]
+		}
+		if id == 0 {
+			return nil, fmt.Errorf("找不到要更新的地点（%s）", up.L.Name)
+		}
+		if _, err := ex.ExecContext(ctx, `UPDATE places SET name=$1, poi_category=$2, lat=$3, lon=$4,
+			country_code=$5, province=$6, city=$7, district=$8, sublocality=$9, thoroughfare=$10, timezone=$11
+			WHERE id=$12`,
+			nullStr(up.L.Name), nullStr(up.L.POICategory), up.L.Lat, up.L.Lon,
+			nullStr(up.L.CountryCode), nullStr(up.L.Province), nullStr(up.L.City), nullStr(up.L.District),
+			nullStr(up.L.Sublocality), nullStr(up.L.Thoroughfare), nullStr(up.L.Timezone), id); err != nil {
+			return nil, fmt.Errorf("更新地点: %w", err)
+		}
+		placeID[up.L.SrcPK] = id
+		st.UpdPlaces++
+	}
+
+	for _, l := range plan.AddPlaces {
+		pk, err := s.nextSrcPK(ctx, ex, dsID, placeSeq)
+		if err != nil {
+			return nil, err
+		}
+		var id int64
+		if err := ex.QueryRowContext(ctx, `INSERT INTO places
+			(dataset_id, src_pk, name, poi_category, lat, lon, country_code, province, city,
+			 district, sublocality, thoroughfare, timezone)
+			VALUES ($1,$2,$3,$4,$5,$6,$7,$8,$9,$10,$11,$12,$13) RETURNING id`,
+			dsID, pk, nullStr(l.Name), nullStr(l.POICategory), l.Lat, l.Lon, nullStr(l.CountryCode),
+			nullStr(l.Province), nullStr(l.City), nullStr(l.District), nullStr(l.Sublocality),
+			nullStr(l.Thoroughfare), nullStr(l.Timezone)).Scan(&id); err != nil {
+			return nil, fmt.Errorf("新增地点: %w", err)
+		}
+		placeID[l.SrcPK] = id
+		st.Places++
+		if err := writeRawRow(ctx, ex, dsID, "ZLOCATION", pk, b.RawRows["ZLOCATION"][l.SrcPK]); err != nil {
+			return nil, err
+		}
+	}
+	return placeID, nil
+}
+
+func (s *Server) mergeActivities(ctx context.Context, ex execer, dsID int64, b *rond.Backup,
+	plan rond.MergePlan, st *mergeStats) (map[int]int64, error) {
+	byUUID, byName := map[string]int64{}, map[string]int64{}
+	rows, err := ex.QueryContext(ctx, `SELECT a.id, a.name, COALESCE(er.raw #>> '{ZUID_,$blob}','')
+		FROM activities a
+		LEFT JOIN entity_raw er ON er.dataset_id = a.dataset_id
+			AND er.entity = 'ZACTIVITY' AND er.src_pk = a.src_pk
+		WHERE a.dataset_id=$1`, dsID)
+	if err != nil {
+		return nil, err
+	}
+	for rows.Next() {
+		var id int64
+		var name, b64 string
+		if err := rows.Scan(&id, &name, &b64); err != nil {
+			rows.Close()
+			return nil, err
+		}
+		if u := uuidFromBase64(b64); u != "" {
+			byUUID[u] = id
+		}
+		if _, dup := byName[name]; !dup && name != "" {
+			byName[name] = id
+		}
+	}
+	rows.Close()
+	if err := rows.Err(); err != nil {
+		return nil, err
+	}
+
+	actID := map[int]int64{}
+	for _, a := range b.Activities {
+		if u := b.ActivityUUID[a.SrcPK]; u != "" {
+			if id, ok := byUUID[u]; ok {
+				actID[a.SrcPK] = id
+				continue
+			}
+		}
+		if id, ok := byName[a.Name]; ok {
+			actID[a.SrcPK] = id
+		}
+	}
+
+	for _, up := range plan.UpdActs {
+		id := actID[up.A.SrcPK]
+		if id == 0 {
+			id = byName[up.A.Name]
+		}
+		if id == 0 {
+			return nil, fmt.Errorf("找不到要更新的活动（%s）", up.A.Name)
+		}
+		if _, err := ex.ExecContext(ctx, `UPDATE activities SET name=$1, color=$2, icon=$3,
+			is_home=$4, is_work=$5, is_excluded=$6, is_archived=$7 WHERE id=$8`,
+			up.A.Name, nullStr(up.A.Color), nullStr(up.A.Icon), up.A.IsHome, up.A.IsWork,
+			up.A.IsExcluded, up.A.IsArchived, id); err != nil {
+			return nil, fmt.Errorf("更新活动: %w", err)
+		}
+		st.UpdActs++
+	}
+
+	for _, a := range plan.AddActs {
+		pk, err := s.nextSrcPK(ctx, ex, dsID, activitySeq)
+		if err != nil {
+			return nil, err
+		}
+		var id int64
+		if err := ex.QueryRowContext(ctx, `INSERT INTO activities
+			(dataset_id, src_pk, name, color, icon, is_home, is_work, is_excluded, is_archived)
+			VALUES ($1,$2,$3,$4,$5,$6,$7,$8,$9) RETURNING id`,
+			dsID, pk, a.Name, nullStr(a.Color), nullStr(a.Icon),
+			a.IsHome, a.IsWork, a.IsExcluded, a.IsArchived).Scan(&id); err != nil {
+			return nil, fmt.Errorf("新增活动: %w", err)
+		}
+		actID[a.SrcPK] = id
+		st.Activities++
+		if err := writeRawRow(ctx, ex, dsID, "ZACTIVITY", pk, b.RawRows["ZACTIVITY"][a.SrcPK]); err != nil {
+			return nil, err
+		}
+	}
+	return actID, nil
+}
+
+// mergeTags 只做「库里有同名的就复用、没有就建」——标签是纯名称实体，没有别的标识。
+func (s *Server) mergeTags(ctx context.Context, ex execer, dsID int64, b *rond.Backup, st *mergeStats) (map[int]int64, error) {
+	byName := map[string]int64{}
+	rows, err := ex.QueryContext(ctx, `SELECT id, name FROM tags WHERE dataset_id=$1`, dsID)
+	if err != nil {
+		return nil, err
+	}
+	for rows.Next() {
+		var id int64
+		var name string
+		if err := rows.Scan(&id, &name); err != nil {
+			rows.Close()
+			return nil, err
+		}
+		byName[name] = id
+	}
+	rows.Close()
+	if err := rows.Err(); err != nil {
+		return nil, err
+	}
+
+	tagID := map[int]int64{}
+	for _, t := range b.Tags {
+		if id, ok := byName[t.Name]; ok {
+			tagID[t.SrcPK] = id
+			continue
+		}
+		pk, err := s.nextSrcPK(ctx, ex, dsID, tagSeq)
+		if err != nil {
+			return nil, err
+		}
+		var id int64
+		if err := ex.QueryRowContext(ctx, `INSERT INTO tags (dataset_id, src_pk, name, color, group_name)
+			VALUES ($1,$2,$3,$4,NULLIF($5,'')) RETURNING id`,
+			dsID, pk, t.Name, nullStr(t.Color), t.GroupName).Scan(&id); err != nil {
+			return nil, fmt.Errorf("新增标签: %w", err)
+		}
+		byName[t.Name] = id
+		tagID[t.SrcPK] = id
+		st.Tags++
+		if err := writeRawRow(ctx, ex, dsID, "ZTAG", pk, b.RawRows["ZTAG"][t.SrcPK]); err != nil {
+			return nil, err
+		}
+	}
+	return tagID, nil
+}
+
+func (s *Server) mergeVisits(ctx context.Context, ex execer, dsID int64, b *rond.Backup, plan rond.MergePlan,
+	placeID, actID, tagID map[int]int64, storedVisits []rond.StoredVisit, st *mergeStats) error {
+	// 备份到访编号 -> 库里的 visits.src_pk：位移的 from/to_visit_src 与天气的
+	// visit_src 写的都是**库里的编号**，端点在备份里的原号在这里换成库里的号。
+	visSrc := map[int]int{}
+	storedByUUID := map[string]rond.StoredVisit{}
+	for _, sv := range storedVisits {
+		if sv.UUID != "" {
+			storedByUUID[sv.UUID] = sv
+		}
+	}
+	for _, v := range b.Visits {
+		if u := b.VisitUUID[v.SrcPK]; u != "" {
+			if sv, ok := storedByUUID[u]; ok {
+				visSrc[v.SrcPK] = sv.SrcPK
+			}
+		}
+	}
+
+	activityByPK := map[int]rond.Activity{}
+	for _, a := range b.Activities {
+		activityByPK[a.SrcPK] = a
+	}
+	visitPlace := map[int]int{}
+	for _, v := range b.Visits {
+		if v.LocationSrcPK != nil {
+			visitPlace[v.SrcPK] = *v.LocationSrcPK
+		}
+	}
+
+	resolve := func(v rond.Visit) (pid, aid any, isHome, isWork bool) {
+		if v.LocationSrcPK != nil {
+			if x, ok := placeID[*v.LocationSrcPK]; ok {
+				pid = x
+			}
+		}
+		if v.ActivitySrcPK != nil {
+			if x, ok := actID[*v.ActivitySrcPK]; ok {
+				aid = x
+			}
+			if a, ok := activityByPK[*v.ActivitySrcPK]; ok {
+				isHome, isWork = a.IsHome, a.IsWork
+			}
+		}
+		return
+	}
+
+	for _, up := range plan.UpdVisits {
+		sv, ok := storedByUUID[up.UUID]
+		if !ok {
+			return fmt.Errorf("找不到要更新的到访（%s）", up.UUID)
+		}
+		pid, aid, isHome, isWork := resolve(up.V)
+		if _, err := ex.ExecContext(ctx, `UPDATE visits SET place_id=$1, activity_id=$2, arrival=$3, departure=$4,
+			duration_min=$5, is_home=$6, is_work=$7, bookmarked=$8, remark=NULLIF($9,''), emoji=NULLIF($10,'')
+			WHERE dataset_id=$11 AND src_pk=$12`,
+			pid, aid, up.V.Arrival, up.V.Departure, visitDuration(up.V), isHome, isWork,
+			up.V.Bookmarked, up.V.Remark, up.V.Emoji, dsID, sv.SrcPK); err != nil {
+			return fmt.Errorf("更新到访: %w", err)
+		}
+		st.UpdVisits++
+	}
+
+	addedVisit := map[int]bool{}
+	for _, v := range plan.AddVisits {
+		pid, aid, isHome, isWork := resolve(v)
+		pk, err := s.nextSrcPK(ctx, ex, dsID, visitSeq)
+		if err != nil {
+			return err
+		}
+		var id int64
+		if err := ex.QueryRowContext(ctx, `INSERT INTO visits
+			(dataset_id, src_pk, place_id, activity_id, arrival, departure, duration_min,
+			 is_home, is_work, bookmarked, is_user_added, remark, emoji, weather_symbol)
+			VALUES ($1,$2,$3,$4,$5,$6,$7,$8,$9,$10,$11,NULLIF($12,''),NULLIF($13,''),NULLIF($14,''))
+			ON CONFLICT DO NOTHING RETURNING id`,
+			dsID, pk, pid, aid, v.Arrival, v.Departure, visitDuration(v), isHome, isWork,
+			v.Bookmarked, v.UserAdded, v.Remark, v.Emoji, v.WeatherSymbol).Scan(&id); err != nil {
+			if err == sql.ErrNoRows {
+				continue
+			}
+			return fmt.Errorf("新增到访: %w", err)
+		}
+
+		visSrc[v.SrcPK] = pk
+		addedVisit[v.SrcPK] = true
+		st.Visits++
+		// 留档必须写：下次再比对时库侧就是靠这里的 UUID 认出这一条，
+		// 少了它只能退到「到达时间 + 坐标」兜底。
+		if err := writeRawRow(ctx, ex, dsID, "ZVISIT", pk, b.RawRows["ZVISIT"][v.SrcPK]); err != nil {
+			return err
+		}
+		for _, tpk := range v.TagSrcPKs {
+			if tid, ok := tagID[tpk]; ok {
+				if _, err := ex.ExecContext(ctx, `INSERT INTO visit_tags (visit_id, tag_id)
+					VALUES ($1,$2) ON CONFLICT DO NOTHING`, id, tid); err != nil {
+					return fmt.Errorf("写入到访标签: %w", err)
+				}
+			}
+		}
+	}
+
+	transName, transColor, transIcon := map[int]string{}, map[int]string{}, map[int]string{}
+	for _, t := range b.Transports {
+		transName[t.SrcPK], transColor[t.SrcPK], transIcon[t.SrcPK] = t.Name, t.Color, t.Icon
+	}
+	coordOf := map[int][2]float64{}
+	for _, l := range b.Locations {
+		coordOf[l.SrcPK] = [2]float64{l.Lat, l.Lon}
+	}
+	// 位移与天气跟着**新插入的到访**走：只插这一轮真正补进来的那些，
+	// 否则库里已有的位移会被整份复制一遍。另一端可以是老到访（库里已经有）。
+	for _, m := range b.Movements {
+		if m.FromVisitSrc == nil || m.ToVisitSrc == nil {
+			continue
+		}
+		if !addedVisit[*m.FromVisitSrc] && !addedVisit[*m.ToVisitSrc] {
+			continue
+		}
+		fsrc, ok1 := visSrc[*m.FromVisitSrc]
+		tsrc, ok2 := visSrc[*m.ToVisitSrc]
+		if !ok1 || !ok2 {
+			continue
+		}
+		var fromPID, toPID any
+		if fp, ok := visitPlace[*m.FromVisitSrc]; ok {
+			if x, ok := placeID[fp]; ok {
+				fromPID = x
+			}
+		}
+		if tp, ok := visitPlace[*m.ToVisitSrc]; ok {
+			if x, ok := placeID[tp]; ok {
+				toPID = x
+			}
+		}
+		var dist any
+		if fp, ok1 := visitPlace[*m.FromVisitSrc]; ok1 {
+			if tp, ok2 := visitPlace[*m.ToVisitSrc]; ok2 {
+				c1, c2 := coordOf[fp], coordOf[tp]
+				if c1[0] != 0 && c2[0] != 0 {
+					dist = geo.Haversine(c1[0], c1[1], c2[0], c2[1])
+				}
+			}
+		}
+		var tname, tcolor, ticon any
+		if m.TransportSrc != nil {
+			tname = nullStr(transName[*m.TransportSrc])
+			tcolor = nullStr(transColor[*m.TransportSrc])
+			ticon = nullStr(transIcon[*m.TransportSrc])
+		}
+		var dur any
+		if m.Start != nil && m.End != nil {
+			if d := int(m.End.Sub(*m.Start).Minutes()); d >= 0 {
+				dur = d
+			}
+		}
+		pk, err := s.nextSrcPK(ctx, ex, dsID, movementSeq)
+		if err != nil {
+			return err
+		}
+		if _, err := ex.ExecContext(ctx, `INSERT INTO movements
+			(dataset_id, src_pk, transport_src, transport_name, transport_color, transport_icon,
+			 from_visit_src, to_visit_src, from_place_id, to_place_id, started_at, ended_at, duration_min, distance_km)
+			VALUES ($1,$2,$3,$4,$5,$6,$7,$8,$9,$10,$11,$12,$13,$14) ON CONFLICT DO NOTHING`,
+			dsID, pk, m.TransportSrc, tname, tcolor, ticon, fsrc, tsrc,
+			fromPID, toPID, m.Start, m.End, dur, dist); err != nil {
+			return fmt.Errorf("新增位移: %w", err)
+		}
+		st.Movements++
+		if err := writeRawRow(ctx, ex, dsID, "ZMOVEMENT", pk, b.RawRows["ZMOVEMENT"][m.SrcPK]); err != nil {
+			return err
+		}
+	}
+	for _, w := range b.Weather {
+		if w.VisitSrc == nil || w.At == nil {
+			continue
+		}
+		if !addedVisit[*w.VisitSrc] {
+			continue
+		}
+		vsrc, ok := visSrc[*w.VisitSrc]
+		if !ok {
+			continue
+		}
+		// 站内删到访时会把天气的归属置空而保留记录（见 editVisitDelete）。
+		// 这类「同一时刻、没有归属」的天气先认领回来，否则同一条到访找回来之后
+		// 会多出一份重复的天气。
+		var claimed int64
+		if err := ex.QueryRowContext(ctx, `UPDATE weather SET visit_src=$1
+			WHERE dataset_id=$2 AND at=$3 AND visit_src IS NULL RETURNING id`,
+			vsrc, dsID, w.At).Scan(&claimed); err == nil {
+			continue
+		}
+		pk, err := s.nextSrcPK(ctx, ex, dsID, weatherSeq)
+		if err != nil {
+			return err
+		}
+		if _, err := ex.ExecContext(ctx, `INSERT INTO weather
+			(dataset_id, src_pk, visit_src, at, is_daylight, temperature_c, apparent_c, humidity,
+			 precipitation_amount, precipitation_chance, wind_speed, visibility, uv_index,
+			 condition, symbol, uv_category, wind_direction)
+			VALUES ($1,$2,$3,$4,$5,$6,$7,$8,$9,$10,$11,$12,$13,NULLIF($14,''),NULLIF($15,''),NULLIF($16,''),NULLIF($17,''))
+			ON CONFLICT DO NOTHING`,
+			dsID, pk, vsrc, w.At, w.IsDaylight, w.TempC, w.ApparentC, w.Humidity,
+			w.PrecipAmt, w.PrecipPct, w.WindSpeed, w.Visibility, w.UVIndex,
+			w.Condition, w.Symbol, w.UVCategory, w.WindDir); err != nil {
+			return fmt.Errorf("新增天气: %w", err)
+		}
+		st.Weather++
+		if err := writeRawRow(ctx, ex, dsID, "ZHOURLYWEATHER", pk, b.RawRows["ZHOURLYWEATHER"][w.SrcPK]); err != nil {
+			return err
+		}
+	}
+
+	return nil
+}
+
+// applyDeletions 处理「仅站内有」里被勾选删除的记录。顺序是到访 → 活动 → 地点：
+// 删地点会级联删掉它名下的全部到访（外键 ON DELETE CASCADE），所以反过来会误删；
+// 而且**有到访引用时直接拒绝**，让站长先处理到访，而不是悄悄带走一批。
+func (s *Server) applyDeletions(ctx context.Context, ex execer, dsID int64, plan rond.MergePlan, st *mergeStats) error {
+	for _, sv := range plan.DelVisits {
+		if _, err := ex.ExecContext(ctx, `DELETE FROM movements WHERE dataset_id=$1
+			AND (from_visit_src=$2 OR to_visit_src=$2)`, dsID, sv.SrcPK); err != nil {
+			return fmt.Errorf("删除到访的位移: %w", err)
+		}
+		// 天气保留、只解除归属——与站点 editVisitDelete 的处理一致
+		if _, err := ex.ExecContext(ctx, `UPDATE weather SET visit_src=NULL
+			WHERE dataset_id=$1 AND visit_src=$2`, dsID, sv.SrcPK); err != nil {
+			return fmt.Errorf("解除天气归属: %w", err)
+		}
+		if _, err := ex.ExecContext(ctx, `DELETE FROM visits WHERE dataset_id=$1 AND src_pk=$2`,
+			dsID, sv.SrcPK); err != nil {
+			return fmt.Errorf("删除到访: %w", err)
+		}
+		if _, err := ex.ExecContext(ctx, `DELETE FROM entity_raw WHERE dataset_id=$1
+			AND entity='ZVISIT' AND src_pk=$2`, dsID, sv.SrcPK); err != nil {
+			return err
+		}
+		st.DelVisits++
+	}
+	for _, sa := range plan.DelActs {
+		// 到访的 activity_id 是 ON DELETE SET NULL，删活动不会带走到访
+		if _, err := ex.ExecContext(ctx, `DELETE FROM activities WHERE dataset_id=$1 AND src_pk=$2`,
+			dsID, sa.SrcPK); err != nil {
+			return fmt.Errorf("删除活动: %w", err)
+		}
+		if _, err := ex.ExecContext(ctx, `DELETE FROM entity_raw WHERE dataset_id=$1
+			AND entity='ZACTIVITY' AND src_pk=$2`, dsID, sa.SrcPK); err != nil {
+			return err
+		}
+		st.DelActs++
+	}
+	for _, sp := range plan.DelPlaces {
+		var n int
+		if err := ex.QueryRowContext(ctx, `SELECT count(*) FROM visits v
+			JOIN places p ON p.id = v.place_id
+			WHERE p.dataset_id=$1 AND p.src_pk=$2`, dsID, sp.SrcPK).Scan(&n); err != nil {
+			return err
+		}
+		if n > 0 {
+			return fmt.Errorf("地点「%s」名下还有 %d 条到访，删它会连带删掉那些到访——请先处理这些到访",
+				sp.Name, n)
+		}
+		if _, err := ex.ExecContext(ctx, `DELETE FROM places WHERE dataset_id=$1 AND src_pk=$2`,
+			dsID, sp.SrcPK); err != nil {
+			return fmt.Errorf("删除地点: %w", err)
+		}
+		if _, err := ex.ExecContext(ctx, `DELETE FROM entity_raw WHERE dataset_id=$1
+			AND entity='ZLOCATION' AND src_pk=$2`, dsID, sp.SrcPK); err != nil {
+			return err
+		}
+		st.DelPlaces++
+	}
+	return nil
+}
+
+// recountPlaces 重算地点聚合与数据集汇总。全量重算而不是只动受影响的行：
+// 367 个地点两条 SQL 就够，省得漏掉任何一条派生列。
+func (s *Server) recountPlaces(ctx context.Context, ex execer, dsID int64) error {
+	if _, err := ex.ExecContext(ctx, `UPDATE places SET visit_count=0, dwell_minutes=0,
+		first_visit_at=NULL, last_visit_at=NULL WHERE dataset_id=$1`, dsID); err != nil {
+		return err
+	}
+	if _, err := ex.ExecContext(ctx, `UPDATE places p SET visit_count=sub.c, dwell_minutes=sub.d,
+		first_visit_at=sub.f, last_visit_at=sub.l
+		FROM (SELECT place_id, count(*) c,
+				COALESCE(sum(LEAST(COALESCE(duration_min,0),10080)),0) d,
+				min(arrival) f, max(arrival) l
+			FROM visits WHERE dataset_id=$1 AND place_id IS NOT NULL GROUP BY place_id) sub
+		WHERE p.id = sub.place_id`, dsID); err != nil {
+		return err
+	}
+	_, err := ex.ExecContext(ctx, `UPDATE datasets SET
+		visit_count=(SELECT count(*) FROM visits WHERE dataset_id=$1),
+		place_count=(SELECT count(*) FROM places WHERE dataset_id=$1),
+		first_visit_at=(SELECT min(arrival) FROM visits WHERE dataset_id=$1),
+		last_visit_at=(SELECT max(arrival) FROM visits WHERE dataset_id=$1)
+		WHERE id=$1`, dsID)
+	return err
+}
+
+// writeRawRow 给新插入的行留一份原始行：导出时要靠它逐列还原，
+// 再次比对时要靠它认出 UUID（否则只能退到「时间 + 坐标」兜底）。
+func writeRawRow(ctx context.Context, ex execer, dsID int64, entity string, pk int, raw map[string]any) error {
+	if len(raw) == 0 {
+		return nil
+	}
+	blob, err := json.Marshal(raw)
+	if err != nil {
+		log.Printf("留档 %s#%d 序列化失败: %v", entity, pk, err)
+		return nil
+	}
+	_, err = ex.ExecContext(ctx, `INSERT INTO entity_raw (dataset_id, entity, src_pk, raw, skipped)
+		VALUES ($1,$2,$3,$4,false)
+		ON CONFLICT (dataset_id, entity, src_pk) DO UPDATE SET raw=EXCLUDED.raw`,
+		dsID, entity, pk, string(blob))
+	return err
+}
+
+func visitDuration(v rond.Visit) any {
+	if v.Arrival == nil || v.Departure == nil {
+		return nil
+	}
+	m := int(v.Departure.Sub(*v.Arrival).Minutes())
+	if m < 0 {
+		m = 0
+	}
+	return m
+}

internal/web/backup_merge_test.go

@@ -0,0 +1,273 @@
+package web
+
+import (
+	"net/http"
+	"net/http/httptest"
+	"strings"
+	"testing"
+)
+
+// mergeBackup 走真实的合并处理函数；失败（重定向里带 err=）直接判错。
+func mergeBackup(t *testing.T, f *movementFixture, token, body string) {
+	t.Helper()
+	if loc := mergeBackupAllowErr(t, f, token, body); strings.Contains(loc, "err=") {
+		t.Fatalf("合并失败: %s", loc)
+	}
+}
+
+// mergeBackupAllowErr 同上，但把落点交出来，供「预期会失败」的用例断言。
+func mergeBackupAllowErr(t *testing.T, f *movementFixture, token, body string) string {
+	t.Helper()
+	rec := httptest.NewRecorder()
+	req := httptest.NewRequest("POST", "/admin/preview/"+token+"/merge", strings.NewReader(body))
+	req.Header.Set("Content-Type", "application/x-www-form-urlencoded")
+	req.SetPathValue("token", token)
+	f.srv.adminBackupMerge(rec, req.WithContext(f.ctx))
+	if rec.Code != http.StatusSeeOther {
+		t.Fatalf("合并应跳回后台: code=%d body=%s", rec.Code, rec.Body.String())
+	}
+	return rec.Header().Get("Location")
+}
+
+// addExtraVisit 造一条「仅站内有」的到访：没有留档，于是没有 UUID，比对时必然落在仅站内有里。
+func (f *movementFixture) addExtraVisit(t *testing.T, pk int, remark string) {
+	t.Helper()
+	if _, err := f.pg.ExecContext(f.ctx, `INSERT INTO visits
+		(dataset_id, src_pk, arrival, departure, is_user_added, remark)
+		VALUES ($1,$2,now(),now(),true,$3)`, f.dsID, pk, remark); err != nil {
+		t.Fatalf("插入补录到访失败: %v", err)
+	}
+}
+
+func (f *movementFixture) scalar(t *testing.T, q string, args ...any) int {
+	t.Helper()
+	var n int
+	if err := f.pg.QueryRowContext(f.ctx, q, args...).Scan(&n); err != nil {
+		t.Fatalf("查询失败: %v", err)
+	}
+	return n
+}
+
+// 合并把备份里多出来的记录写进去，而且写完要「复原」——同一份备份再比一次必须一条不差。
+//
+// 这条测试同时钉住三件事：
+//   - 新增行用 nextSrcPK 发新号，且**写进 entity_raw**（否则下次比对认不出 UUID）；
+//   - 位移/天气的外键指向库里的新编号（写错就成孤儿）；
+//   - 合并是幂等的：再传同一份备份，差异归零。
+func TestBackupMergeRestoresMissingVisits(t *testing.T) {
+	f := newMovementFixture(t)
+
+	visitCount := func() int {
+		return f.scalar(t, `SELECT count(*) FROM visits WHERE dataset_id=$1`, f.dsID)
+	}
+	all := visitCount()
+	movCount := f.scalar(t, `SELECT count(*) FROM movements WHERE dataset_id=$1`, f.dsID)
+	weatherCount := f.scalar(t, `SELECT count(*) FROM weather WHERE dataset_id=$1`, f.dsID)
+	// 原始数据里就有指向「因缺到达时间而没入库」的到访的位移，先记下基线再比
+	orphanQ := `SELECT count(*) FROM movements m WHERE m.dataset_id=$1
+		AND (m.from_visit_src IS NULL OR NOT EXISTS (
+			SELECT 1 FROM visits v WHERE v.dataset_id=$1 AND v.src_pk=m.from_visit_src))`
+	orphans0 := f.scalar(t, orphanQ, f.dsID)
+
+	// 制造差异：按**站点删到访的方式**删掉最早的两条（见 editVisitDelete）——
+	// 位移删掉、天气的归属置空、到访删掉。直接 DELETE visits 会留下孤儿天气，
+	// 那是测试手法造成的，不是产品行为。
+	var pk1, pk2 int
+	if err := f.pg.QueryRowContext(f.ctx, `SELECT
+		(SELECT src_pk FROM visits WHERE dataset_id=$1 ORDER BY arrival LIMIT 1),
+		(SELECT src_pk FROM visits WHERE dataset_id=$1 ORDER BY arrival OFFSET 1 LIMIT 1)`,
+		f.dsID).Scan(&pk1, &pk2); err != nil {
+		t.Fatalf("取待删到访失败: %v", err)
+	}
+	for _, q := range []string{
+		`DELETE FROM movements WHERE dataset_id=$1 AND (from_visit_src IN ($2,$3) OR to_visit_src IN ($2,$3))`,
+		`UPDATE weather SET visit_src=NULL WHERE dataset_id=$1 AND visit_src IN ($2,$3)`,
+		`DELETE FROM visits WHERE dataset_id=$1 AND src_pk IN ($2,$3)`,
+	} {
+		if _, err := f.pg.ExecContext(f.ctx, q, f.dsID, pk1, pk2); err != nil {
+			t.Fatalf("预置删除失败: %v", err)
+		}
+	}
+	if got := visitCount(); got != all-2 {
+		t.Fatalf("预置失败：应有 %d 条，实际 %d", all-2, got)
+	}
+
+	token, page := previewBackupToken(t, f, f.src)
+	if a, _, _ := visitCounts(t, page); a != 2 {
+		t.Fatalf("差异页应报 2 条新增，实际 %d", a)
+	}
+
+	mergeBackup(t, f, token, "add_new=1")
+
+	if got := visitCount(); got != all {
+		t.Fatalf("合并后到访数应回到 %d，实际 %d", all, got)
+	}
+	// 新补进来的那两条必须各有一份留档（下次比对就靠它认 UUID）。
+	// 被删掉的行会留下孤儿留档——那是老数据，不影响，所以只查新编号。
+	if got := f.scalar(t, `SELECT count(*) FROM entity_raw er
+		WHERE er.dataset_id=$1 AND er.entity='ZVISIT' AND EXISTS (
+			SELECT 1 FROM visits v WHERE v.dataset_id=$1 AND v.src_pk=er.src_pk)`, f.dsID); got != all {
+		t.Errorf("每条在库的到访都该有原始行留档，实际 %d / %d", got, all)
+	}
+	if got := f.scalar(t, `SELECT count(*) FROM movements WHERE dataset_id=$1`, f.dsID); got != movCount {
+		t.Errorf("位移应恢复到 %d，实际 %d", movCount, got)
+	}
+	if got := f.scalar(t, `SELECT count(*) FROM weather WHERE dataset_id=$1`, f.dsID); got != weatherCount {
+		t.Errorf("天气应恢复到 %d，实际 %d", weatherCount, got)
+	}
+	// 合并不该新增孤儿位移（原始数据里本来就有一些，见 orphanQ 的注释）
+	if orphans := f.scalar(t, orphanQ, f.dsID); orphans > orphans0 {
+		t.Errorf("孤儿位移变多了：%d → %d", orphans0, orphans)
+	}
+
+	// 幂等：再比一次应当完全一致
+	page = previewBackup(t, f, f.src)
+	if a, g, c := visitCounts(t, page); a != 0 || g != 0 || c != 0 {
+		t.Fatalf("合并后再比对应当没有差异，实际 新增 %d / 仅站内有 %d / 冲突 %d", a, g, c)
+	}
+}
+
+// 冲突逐条选「用实机」就把备份的值写进去，选「用站内」就原样不动。
+func TestBackupMergeConflictChoice(t *testing.T) {
+	f := newMovementFixture(t)
+
+	var pk int
+	if err := f.pg.QueryRowContext(f.ctx, `UPDATE visits SET remark='站内改过的备注'
+		WHERE id = (SELECT id FROM visits WHERE dataset_id=$1 ORDER BY src_pk LIMIT 1)
+		RETURNING src_pk`, f.dsID).Scan(&pk); err != nil {
+		t.Fatalf("改备注失败: %v", err)
+	}
+	// 这条的 UUID 就是页面上的冲突键
+	var b64 string
+	if err := f.pg.QueryRowContext(f.ctx, `SELECT COALESCE(raw #>> '{ZIDENTIFIER_,$blob}','')
+		FROM entity_raw WHERE dataset_id=$1 AND entity='ZVISIT' AND src_pk=$2`, f.dsID, pk).Scan(&b64); err != nil {
+		t.Fatalf("取 UUID 失败: %v", err)
+	}
+	uuid := uuidFromBase64(b64)
+	if uuid == "" {
+		t.Fatal("这条到访应当有 UUID")
+	}
+
+	remark := func() string {
+		var s string
+		if err := f.pg.QueryRowContext(f.ctx, `SELECT COALESCE(remark,'') FROM visits
+			WHERE dataset_id=$1 AND src_pk=$2`, f.dsID, pk).Scan(&s); err != nil {
+			t.Fatalf("读备注失败: %v", err)
+		}
+		return s
+	}
+
+	// 用站内：备注保持站里那份
+	token, _ := previewBackupToken(t, f, f.src)
+	mergeBackup(t, f, token, "vc_"+uuid+"=db")
+	if got := remark(); got != "站内改过的备注" {
+		t.Fatalf("选「用站内」不该改动，实际 %q", got)
+	}
+
+	// 用实机：备注被备份里的值（空）覆盖回去
+	token, _ = previewBackupToken(t, f, f.src)
+	mergeBackup(t, f, token, "vc_"+uuid+"=backup")
+	if got := remark(); got != "" {
+		t.Fatalf("选「用实机」应覆盖成备份里的值，实际 %q", got)
+	}
+}
+
+// 什么都不勾、冲突全跳过时，合并应当什么都不写。
+func TestBackupMergeNoopKeepsData(t *testing.T) {
+	f := newMovementFixture(t)
+	before := f.scalar(t, `SELECT count(*) FROM visits WHERE dataset_id=$1`, f.dsID)
+
+	token, _ := previewBackupToken(t, f, f.src)
+	mergeBackup(t, f, token, "add_new=0")
+
+	if got := f.scalar(t, `SELECT count(*) FROM visits WHERE dataset_id=$1`, f.dsID); got != before {
+		t.Fatalf("没勾任何改动却动了数据: %d → %d", before, got)
+	}
+}
+
+// 删除必须「勾了才删」：没勾的一个都不动，勾了的那条（连带它的位移）才消失。
+func TestBackupMergeDeletesOnlyChecked(t *testing.T) {
+	f := newMovementFixture(t)
+	visitCount := func() int {
+		return f.scalar(t, `SELECT count(*) FROM visits WHERE dataset_id=$1`, f.dsID)
+	}
+	before := visitCount()
+
+	f.addExtraVisit(t, 900001, "稍后删掉")
+	f.addExtraVisit(t, 900002, "留着不动")
+	if got := visitCount(); got != before+2 {
+		t.Fatalf("预置失败: %d", got)
+	}
+
+	// 只勾一条
+	token, page := previewBackupToken(t, f, f.src)
+	if _, g, _ := visitCounts(t, page); g != 2 {
+		t.Fatalf("差异页应报 2 条仅站内有，实际 %d", g)
+	}
+	mergeBackup(t, f, token, "dv_900001=1")
+
+	if got := visitCount(); got != before+1 {
+		t.Fatalf("应只删掉勾选的那条，实际剩 %d（原 %d）", got, before)
+	}
+	if n := f.scalar(t, `SELECT count(*) FROM visits WHERE dataset_id=$1 AND src_pk=900002`, f.dsID); n != 1 {
+		t.Error("没勾的那条不该被动")
+	}
+	// 删掉的到访不该留下留档
+	if n := f.scalar(t, `SELECT count(*) FROM entity_raw WHERE dataset_id=$1
+		AND entity='ZVISIT' AND src_pk=900001`, f.dsID); n != 0 {
+		t.Error("删除到访时要连它的原始行留档一起清掉")
+	}
+
+	// 再合并一次、一条都不勾：剩下那条必须还在
+	token, _ = previewBackupToken(t, f, f.src)
+	mergeBackup(t, f, token, "add_new=0")
+	if got := visitCount(); got != before+1 {
+		t.Fatalf("不勾就不该删，实际 %d", got)
+	}
+}
+
+// 名下有到访的地点必须拒绝删除——那个外键是 ON DELETE CASCADE，
+// 真删下去会把到访一起带走。拒绝后还要整体回滚，别留下半截。
+func TestBackupMergeRefusesDeletingPlaceInUse(t *testing.T) {
+	f := newMovementFixture(t)
+	visitCount := func() int {
+		return f.scalar(t, `SELECT count(*) FROM visits WHERE dataset_id=$1`, f.dsID)
+	}
+	beforeVisits := visitCount()
+
+	// 一个没有到访的空地点：允许删
+	if _, err := f.pg.ExecContext(f.ctx, `INSERT INTO places (dataset_id, src_pk, name, lat, lon)
+		VALUES ($1, 910001, '临时空地点', 30.0, 120.0)`, f.dsID); err != nil {
+		t.Fatalf("插入地点失败: %v", err)
+	}
+	// 一个有到访的地点：必须拒绝
+	if _, err := f.pg.ExecContext(f.ctx, `INSERT INTO places (dataset_id, src_pk, name, lat, lon)
+		VALUES ($1, 910002, '有到访的地点', 31.0, 121.0)`, f.dsID); err != nil {
+		t.Fatalf("插入地点失败: %v", err)
+	}
+	if _, err := f.pg.ExecContext(f.ctx, `INSERT INTO visits (dataset_id, src_pk, place_id, arrival, departure)
+		VALUES ($1, 910003, (SELECT id FROM places WHERE dataset_id=$1 AND src_pk=910002), now(), now())`,
+		f.dsID); err != nil {
+		t.Fatalf("插入到访失败: %v", err)
+	}
+
+	// 先删空地点：应当成功
+	token, _ := previewBackupToken(t, f, f.src)
+	mergeBackup(t, f, token, "dp_910001=1")
+	if n := f.scalar(t, `SELECT count(*) FROM places WHERE dataset_id=$1 AND src_pk=910001`, f.dsID); n != 0 {
+		t.Fatal("空地点应当被删掉")
+	}
+
+	// 再删有到访的地点：应当被拒绝
+	token, _ = previewBackupToken(t, f, f.src)
+	loc := mergeBackupAllowErr(t, f, token, "dp_910002=1")
+	if !strings.Contains(loc, "err=") {
+		t.Fatal("名下有到访的地点应当拒绝删除")
+	}
+	if n := f.scalar(t, `SELECT count(*) FROM places WHERE dataset_id=$1 AND src_pk=910002`, f.dsID); n != 1 {
+		t.Error("被拒绝后地点不该消失")
+	}
+	if got := visitCount(); got != beforeVisits+1 {
+		t.Errorf("被拒绝后到访数不该变，实际 %d（期望 %d）", got, beforeVisits+1)
+	}
+}

internal/web/fillup.go

@@ -0,0 +1,505 @@
+package web
+
+import (
+	"context"
+	"fmt"
+	"html/template"
+	"net/http"
+	"net/url"
+	"sort"
+	"strconv"
+	"strings"
+	"sync"
+)
+
+// 地点补全：把「活动为空 / 类别为空」的地点捞出来，给一条建议，由站长确认后再写。
+//
+// 两条底线贯穿这个文件：
+//   - **只填空**：SQL 里都带 `AND activity_id IS NULL` / `AND poi_category=''`，
+//     已经有值的一律不动，改错了也只影响原本空着的地方；
+//   - **按地点批量**：填活动是把该地点名下**所有**没活动的到访一起设，
+//     而不是只挑一条——否则同一个地点会在统计里分裂成两种活动。
+
+// fillupHint 是一次高德查询给出的建议（按地点 id 缓存在内存里，页面重载仍能看到）。
+type fillupHint struct {
+	Act  string
+	Cat  string
+	Type string // 高德给的原始类型（「餐饮服务;咖啡厅」），没映射上时给站长看
+	Poi  string // 最近的 POI 名字，同样只作参考
+}
+
+var (
+	fillupMu    sync.Mutex
+	fillupCache = map[int64]fillupHint{}
+)
+
+func fillupCachePut(placeID int64, h fillupHint) {
+	fillupMu.Lock()
+	defer fillupMu.Unlock()
+	fillupCache[placeID] = h
+}
+
+func fillupHintOf(placeID int64) (fillupHint, bool) {
+	fillupMu.Lock()
+	defer fillupMu.Unlock()
+	h, ok := fillupCache[placeID]
+	return h, ok
+}
+
+// FillupRow 是补全页上的一行。
+type FillupRow struct {
+	PlaceID  int64
+	SrcPK    int
+	Name     string
+	City     string
+	Visits   int
+	NoAct    int  // 还没设活动的到访条数
+	NoCat    bool // 类别为空
+	HasCoord bool
+	Lat, Lon float64
+	ActHint  string // 建议的活动名（空 = 没建议）
+	ActID    int64  // 建议命中现有活动时的 id；0 表示得新建
+	CatHint  string // 建议的类别
+	Source   string // 建议从哪来
+	AmapType string // 高德给出的类型原文，供人工判断（可能没映射出建议）
+	AmapPoi  string // 高德找到的最近 POI 名字
+}
+
+func (r FillupRow) Missing() string {
+	switch {
+	case r.NoAct > 0 && r.NoCat:
+		return "活动 + 类别"
+	case r.NoAct > 0:
+		return "活动"
+	default:
+		return "类别"
+	}
+}
+
+// FillupData 是补全页的数据。
+type FillupData struct {
+	Page
+	Rows       []FillupRow
+	Activities []activityOption // 下拉选项
+	Categories []fillupCategory // 类别下拉选项
+	Total      int
+	WithHint   int
+
+	// 分页。218 行在手机上堆成一屏一行有五万多像素长，一页 30 行刚好。
+	PageNo    int
+	PageCount int
+}
+
+// fillupPerPage 是补全页每页的行数。
+const fillupPerPage = 30
+
+// PageLink 生成带页码的链接，供模板里的上一页/下一页用。
+func (d FillupData) PageLink(no int) template.URL {
+	if no < 1 {
+		no = 1
+	}
+	return template.URL("/admin/fillup?page=" + strconv.Itoa(no))
+}
+
+// activityOption 只是给下拉用的（活动 id + 名字）。
+type activityOption struct {
+	ID   int64
+	Name string
+}
+
+// fillupRows 捞出需要补的地点。判定口径：
+//   - 缺活动 = 该地点名下还有 activity_id 为空的到访（含「一条都没设」和「只设了一部分」）；
+//   - 缺类别 = poi_category 为空。
+//
+// 零到访的地点只要缺类别也会进来——它们没有到访可挂活动，补类别仍然有意义。
+func (s *Server) fillupRows(ctx context.Context, datasetID int64) ([]FillupRow, error) {
+	rows, err := s.db.QueryContext(ctx, `
+		SELECT p.id, p.src_pk, COALESCE(p.name,''), COALESCE(p.city,''),
+		       COALESCE(p.lat,0), COALESCE(p.lon,0), COALESCE(p.poi_category,''),
+		       (SELECT count(*) FROM visits v WHERE v.place_id = p.id AND v.activity_id IS NULL)
+		FROM places p
+		WHERE p.dataset_id = $1
+		  AND (COALESCE(p.poi_category,'') = ''
+		       OR EXISTS (SELECT 1 FROM visits v WHERE v.place_id = p.id AND v.activity_id IS NULL))
+		ORDER BY p.visit_count DESC, p.id`, datasetID)
+	if err != nil {
+		return nil, err
+	}
+	defer rows.Close()
+	// 活动名 -> id：用来判断建议是「选中现有的」还是「需要新建一个」
+	actByName := map[string]int64{}
+	arows, err := s.db.QueryContext(ctx, `SELECT id, name FROM activities WHERE dataset_id=$1`, datasetID)
+	if err == nil {
+		for arows.Next() {
+			var id int64
+			var name string
+			if arows.Scan(&id, &name) == nil {
+				actByName[name] = id
+			}
+		}
+		arows.Close()
+	}
+	var out []FillupRow
+	for rows.Next() {
+		var r FillupRow
+		var lat, lon float64
+		var cat string
+		if err := rows.Scan(&r.PlaceID, &r.SrcPK, &r.Name, &r.City, &lat, &lon, &cat, &r.NoAct); err != nil {
+			return nil, err
+		}
+		r.NoCat = cat == ""
+		r.Lat, r.Lon = lat, lon
+		r.HasCoord = lat != 0 || lon != 0
+		// 建议先走本地词表：不花钱、不联网、结果稳定
+		if r.NoAct > 0 {
+			if a := guessActivityByName(r.Name); a != "" {
+				r.ActHint, r.Source, r.ActID = a, "词表", actByName[a]
+			}
+		}
+		out = append(out, r)
+	}
+	if err := rows.Err(); err != nil {
+		return nil, err
+	}
+	// 补上高德那一轮的结果（如果有缓存），并把没建议的排后面
+	for i := range out {
+		if h, ok := fillupHintOf(out[i].PlaceID); ok {
+			if out[i].ActHint == "" && h.Act != "" {
+				out[i].ActHint, out[i].Source, out[i].ActID = h.Act, "高德", actByName[h.Act]
+			}
+			if out[i].NoCat && h.Cat != "" {
+				out[i].CatHint = h.Cat
+			}
+			out[i].AmapType, out[i].AmapPoi = h.Type, h.Poi
+		}
+	}
+	sort.SliceStable(out, func(i, j int) bool {
+		return (out[i].ActHint != "" || out[i].CatHint != "") && (out[j].ActHint == "" && out[j].CatHint == "")
+	})
+	return out, nil
+}
+
+func (s *Server) adminFillupPage(w http.ResponseWriter, r *http.Request) {
+	ctx := r.Context()
+	ds, err := s.datasetFor(ctx)
+	if err != nil {
+		s.serverError(w, r, err)
+		return
+	}
+	if ds == nil {
+		s.fillupFlash(w, r, "err", "还没有可补全的数据集")
+		return
+	}
+	p, err := s.pageBase(r, "admin", "地点补全")
+	if err != nil {
+		s.serverError(w, r, err)
+		return
+	}
+	p.SetFlashFromQuery(r)
+	rows, err := s.fillupRows(ctx, ds.ID)
+	if err != nil {
+		s.serverError(w, r, err)
+		return
+	}
+	acts, err := s.activityOptions(ctx, ds.ID)
+	if err != nil {
+		s.serverError(w, r, err)
+		return
+	}
+	total := len(rows)
+	hinted := 0
+	for _, row := range rows {
+		if row.ActHint != "" || row.CatHint != "" {
+			hinted++
+		}
+	}
+	pageCount := (total + fillupPerPage - 1) / fillupPerPage
+	pageNo := clampPage(r.URL.Query().Get("page"), pageCount)
+	from := (pageNo - 1) * fillupPerPage
+	to := from + fillupPerPage
+	if to > total {
+		to = total
+	}
+	rows = rows[from:to]
+
+	s.render(w, "admin/fillup", FillupData{
+		Page: p, Rows: rows, Activities: acts, Categories: fillupCategories(),
+		Total: total, WithHint: hinted, PageNo: pageNo, PageCount: pageCount,
+	})
+}
+
+// activityOptions 列出该数据集的活动，供下拉选择。
+func (s *Server) activityOptions(ctx context.Context, datasetID int64) ([]activityOption, error) {
+	rows, err := s.db.QueryContext(ctx, `SELECT id, name FROM activities
+		WHERE dataset_id=$1 ORDER BY name`, datasetID)
+	if err != nil {
+		return nil, err
+	}
+	defer rows.Close()
+	var out []activityOption
+	for rows.Next() {
+		var a activityOption
+		if err := rows.Scan(&a.ID, &a.Name); err != nil {
+			return nil, err
+		}
+		out = append(out, a)
+	}
+	return out, rows.Err()
+}
+
+// fillupCategory 是类别下拉的一项。Label 用中文，并标出这一种真机到底用过没有——
+// ZCATEGORY_ 那列真机存的就是这些 MKPOICategory 枚举串，写错名字不会损坏数据，
+// 但会显示不出类别，所以优先选「真机用过」的那几种。
+type fillupCategory struct {
+	Value string
+	Label string
+}
+
+// fillupCategories 是类别下拉的选项：真机用过的 12 种在前，其余常见 MapKit 类别在后。
+func fillupCategories() []fillupCategory {
+	known := []string{
+		"MKPOICategoryRestaurant", "MKPOICategoryStore", "MKPOICategoryPublicTransport",
+		"MKPOICategoryHotel", "MKPOICategoryLandmark", "MKPOICategoryFoodMarket",
+		"MKPOICategoryBeach", "MKPOICategoryMuseum", "MKPOICategoryCampground",
+		"MKPOICategoryZoo", "MKPOICategoryStadium", "MKPOICategoryPark",
+	}
+	extra := []string{
+		"MKPOICategoryCafe", "MKPOICategoryBakery", "MKPOICategoryAirport",
+		"MKPOICategoryHospital", "MKPOICategoryPharmacy", "MKPOICategorySchool",
+		"MKPOICategoryUniversity", "MKPOICategoryLibrary", "MKPOICategoryParking",
+		"MKPOICategoryBank", "MKPOICategoryMovieTheater", "MKPOICategoryFitnessCenter",
+		"MKPOICategoryNationalPark", "MKPOICategoryAquarium", "MKPOICategoryAmusementPark",
+		"MKPOICategoryGasStation", "MKPOICategoryCarRental", "MKPOICategoryMarina",
+	}
+	out := make([]fillupCategory, 0, len(known)+len(extra))
+	for _, c := range known {
+		out = append(out, fillupCategory{c, poiName(c) + "（真机用过）"})
+	}
+	for _, c := range extra {
+		out = append(out, fillupCategory{c, poiName(c)})
+	}
+	return out
+}
+
+// adminFillupApply 执行补全。表单里每行两个字段：
+//
+//	act_<placeID> = ""           不动
+//	              = 活动 id       设为该活动
+//	              = "__new__:名字" 新建这个活动再设
+//	cat_<placeID> = ""           不动
+//	              = MKPOICategoryX 写进地点类别
+//
+// 全部改动在一个事务里，失败整体回滚。
+func (s *Server) adminFillupApply(w http.ResponseWriter, r *http.Request) {
+	ctx := r.Context()
+	ds, err := s.datasetFor(ctx)
+	if err != nil || ds == nil {
+		s.fillupFlash(w, r, "err", "还没有可补全的数据集")
+		return
+	}
+	if err := r.ParseForm(); err != nil {
+		s.serverError(w, r, err)
+		return
+	}
+	var acts, cats, newActs int
+	err = s.withTx(ctx, func(ex execer) error {
+		ids, err := s.fillupTargets(ctx, ex, ds.ID)
+		if err != nil {
+			return err
+		}
+		// 活动：先把要新建的建出来，再统一分配，避免同一批里重复建
+		actByName := map[string]int64{}
+		actByID := map[int64]string{}
+		for _, a := range mustActivityOptions(ctx, ex, ds.ID) {
+			actByName[a.Name], actByID[a.ID] = a.ID, a.Name
+		}
+
+		for _, pid := range ids {
+			// 框里填的是**活动名**：对得上就用现有的，对不上就新建一个
+			if name := strings.TrimSpace(r.PostFormValue("act_" + strconv.FormatInt(pid, 10))); name != "" {
+				actID, ok := actByName[name]
+				if !ok {
+					pk, err := s.nextSrcPK(ctx, ex, ds.ID, activitySeq)
+					if err != nil {
+						return err
+					}
+					if err := ex.QueryRowContext(ctx, `INSERT INTO activities
+						(dataset_id, src_pk, name, color, icon, is_home, is_work, is_excluded, is_archived)
+						VALUES ($1,$2,$3,'','',false,false,false,false) RETURNING id`,
+						ds.ID, pk, name).Scan(&actID); err != nil {
+						return err
+					}
+					actByName[name] = actID
+					newActs++
+				}
+				isHome, isWork := s.activityFlags(ctx, ex, actID)
+				res, err := ex.ExecContext(ctx, `UPDATE visits v SET activity_id=$1, is_home=$2, is_work=$3
+					WHERE v.dataset_id=$4 AND v.activity_id IS NULL
+					  AND v.place_id = (SELECT p.id FROM places p WHERE p.dataset_id=$4 AND p.id=$5)`,
+					actID, isHome, isWork, ds.ID, pid)
+				if err != nil {
+					return err
+				}
+				if n, _ := res.RowsAffected(); n > 0 {
+					acts += int(n)
+				}
+			}
+			if cat := strings.TrimSpace(r.PostFormValue("cat_" + strconv.FormatInt(pid, 10))); cat != "" {
+				res, err := ex.ExecContext(ctx, `UPDATE places SET poi_category=$1
+					WHERE dataset_id=$2 AND id=$3 AND COALESCE(poi_category,'')=''`, cat, ds.ID, pid)
+				if err != nil {
+					return err
+				}
+				if n, _ := res.RowsAffected(); n > 0 {
+					cats += int(n)
+				}
+			}
+		}
+		return nil
+	})
+	if err != nil {
+		s.fillupFlash(w, r, "err", "补全失败，已整体回滚："+err.Error())
+		return
+	}
+	if acts+cats == 0 {
+		s.fillupFlash(w, r, "ok", "没有选中任何要补的内容，数据未变")
+		return
+	}
+	msg := "补全完成"
+	if acts > 0 {
+		msg += "：为 " + strconv.Itoa(acts) + " 条到访设了活动"
+	}
+	if cats > 0 {
+		msg += "：为 " + strconv.Itoa(cats) + " 个地点补了类别"
+	}
+	if newActs > 0 {
+		msg += "（新建 " + strconv.Itoa(newActs) + " 个活动类型）"
+	}
+	s.fillupFlash(w, r, "ok", msg)
+}
+
+// fillupTargets 返回本次提交涉及的地点 id（只认本数据集的，防止越权改别处）。
+func (s *Server) fillupTargets(ctx context.Context, ex execer, datasetID int64) ([]int64, error) {
+	rows, err := ex.QueryContext(ctx, `SELECT id FROM places WHERE dataset_id=$1`, datasetID)
+	if err != nil {
+		return nil, err
+	}
+	defer rows.Close()
+	var out []int64
+	for rows.Next() {
+		var id int64
+		if err := rows.Scan(&id); err != nil {
+			return nil, err
+		}
+		out = append(out, id)
+	}
+	return out, rows.Err()
+}
+
+func (s *Server) activityFlags(ctx context.Context, ex execer, actID int64) (isHome, isWork bool) {
+	ex.QueryRowContext(ctx, `SELECT is_home, is_work FROM activities WHERE id=$1`, actID).Scan(&isHome, &isWork)
+	return
+}
+
+func mustActivityOptions(ctx context.Context, ex execer, datasetID int64) []activityOption {
+	rows, err := ex.QueryContext(ctx, `SELECT id, name FROM activities WHERE dataset_id=$1`, datasetID)
+	if err != nil {
+		return nil
+	}
+	defer rows.Close()
+	var out []activityOption
+	for rows.Next() {
+		var a activityOption
+		if err := rows.Scan(&a.ID, &a.Name); err == nil {
+			out = append(out, a)
+		}
+	}
+	return out
+}
+
+// fillupAmapBatch 是一次「用高德分析」最多处理的条数。
+// 高德限流 10 QPS、每条一次请求，一批 40 条约 4 秒——再长就该担心请求超时了。
+const fillupAmapBatch = 40
+
+// adminFillupAmap 对「还没有建议、有坐标、还没查过」的地点跑一次高德周边搜索，
+// 把猜出来的活动与类别放进内存缓存，页面重载就能看到。
+//
+// 用周边的坐标搜而不是按名字搜：地点名可能是后来反查补全出来的，
+// 而坐标是它真实所在的位置，「这个坐标上是什么 POI」比「这个名字叫什么」准得多。
+func (s *Server) adminFillupAmap(w http.ResponseWriter, r *http.Request) {
+	ctx := r.Context()
+	ds, err := s.datasetFor(ctx)
+	if err != nil || ds == nil {
+		s.fillupFlash(w, r, "err", "还没有可补全的数据集")
+		return
+	}
+	if s.cfg.GeocodeKey == "" {
+		s.fillupFlash(w, r, "err", "conf/app.ini 里没配 geocode_key，用不了高德")
+		return
+	}
+	rows, err := s.fillupRows(ctx, ds.ID)
+	if err != nil {
+		s.serverError(w, r, err)
+		return
+	}
+	var todo []FillupRow
+	for _, row := range rows {
+		if !row.HasCoord || row.ActHint != "" {
+			continue // 已经有建议、或者没坐标搜不了
+		}
+		if _, done := fillupHintOf(row.PlaceID); done {
+			continue // 查过了（哪怕是没查着），别反复重试
+		}
+		todo = append(todo, row)
+	}
+	if len(todo) == 0 {
+		s.fillupFlash(w, r, "ok", "没有需要再查的地点")
+		return
+	}
+	n, hits := 0, 0
+	for _, row := range todo {
+		if n >= fillupAmapBatch {
+			break
+		}
+		poi, typ, _, ok := s.amapAround(ctx, row.Lat, row.Lon)
+		var h fillupHint
+		if ok {
+			h.Type, h.Poi = typ, poi
+			h.Act = guessActivityFromAmapType(typ)
+			h.Cat = guessCategoryFromAmapType(typ)
+			if h.Act != "" || h.Cat != "" {
+				hits++
+			}
+		}
+		fillupCachePut(row.PlaceID, h)
+		n++
+	}
+	msg := fmt.Sprintf("已用高德分析 %d 个，其中 %d 个猜出了结果", n, hits)
+	if left := len(todo) - n; left > 0 {
+		msg += fmt.Sprintf("；还剩 %d 个，再点一次继续", left)
+	}
+	s.fillupFlash(w, r, "ok", msg)
+}
+
+// fillupFlash 把提示带回补全页本身（adminFlash 是跳后台首页的），并保留当前页码——
+// 处理完的那几行会从列表里消失，停在同一页才看得见剩下的。
+func (s *Server) fillupFlash(w http.ResponseWriter, r *http.Request, kind, msg string) {
+	q := url.Values{}
+	q.Set(kind, msg)
+	if pg := strings.TrimSpace(r.PostFormValue("page")); pg != "" {
+		q.Set("page", pg)
+	}
+	http.Redirect(w, r, "/admin/fillup?"+q.Encode(), http.StatusSeeOther)
+}
+
+// clampPage 解析页码并夹到有效范围；解析不出来就回第一页。
+func clampPage(raw string, pageCount int) int {
+	no, err := strconv.Atoi(strings.TrimSpace(raw))
+	if err != nil || no < 1 {
+		no = 1
+	}
+	if pageCount > 0 && no > pageCount {
+		no = pageCount
+	}
+	return no
+}

internal/web/fillup_rules.go

@@ -0,0 +1,203 @@
+package web
+
+import "strings"
+
+// 地点补全的判定规则：地名怎么猜活动、高德 POI 类型怎么猜活动和类别。
+//
+// 两条原则：
+//   - **只填空**：调用方只在原值为空时才用这里的建议；
+//   - **拿不准就别猜**：宁可标成「待确认」让人看一眼，也不要瞎填一个看起来像样的值，
+//     错的活动会直接污染统计与筛选，比空着更难发现。
+//
+// 词表按**定义顺序**匹配，先命中的赢——所以具体的词要排在笼统的词前面。
+
+// actHint 是一条「关键词 → 活动类型」的映射，关键词出现在地名里就算命中。
+type actHint struct{ kw, val string }
+
+// nameActHints 从地名猜活动。活动名必须与站点里已有的 31 个完全一致，
+// 否则调用方会把它当成「需要新建的类型」。
+var nameActHints = []actHint{
+	{"咖啡", "奶茶和甜甜水"}, {"奶茶", "奶茶和甜甜水"}, {"茶艺", "奶茶和甜甜水"},
+	{"书店", "学习"}, {"图书馆", "学习"}, {"学校", "学习"}, {"大学", "学习"},
+	{"博物馆", "纪念馆"}, {"纪念馆", "纪念馆"}, {"陈列馆", "纪念馆"},
+	{"动物园", "动物园"}, {"海洋馆", "动物园"},
+	{"沙滩", "沙滩"}, {"海滨", "沙滩"}, {"海滩", "沙滩"},
+	{"度假区", "旅游景点"}, {"古镇", "旅游景点"}, {"景区", "旅游景点"},
+	{"游客中心", "旅游景点"}, {"索道", "旅游景点"},
+	{"公园", "散步"}, {"绿道", "散步"}, {"步道", "散步"}, {"广场", "散步"}, {"栈道", "散步"},
+	{"步行街", "步行街"}, {"老街", "步行街"},
+	{"小吃", "美食街"}, {"美食", "美食街"}, {"夜市", "美食街"}, {"大排档", "美食街"},
+	{"餐厅", "餐厅"}, {"饭店", "餐厅"}, {"酒楼", "餐厅"}, {"食府", "餐厅"}, {"火锅", "餐厅"},
+	{"菜市场", "市场"}, {"农贸", "市场"}, {"市场", "市场"},
+	{"超市", "小商店"}, {"便利店", "小商店"}, {"小卖部", "小商店"}, {"商店", "小商店"},
+	{"商场", "商场"}, {"购物", "商场"}, {"百货", "商场"},
+	{"公交", "公共交通"}, {"地铁", "公共交通"}, {"车站", "公共交通"}, {"机场", "公共交通"},
+	{"高铁", "公共交通"}, {"码头", "公共交通"}, {"客运", "公共交通"},
+	{"民宿", "酒店"}, {"客栈", "酒店"}, {"宾馆", "酒店"}, {"酒店", "酒店"}, {"度假", "酒店"},
+	{"医院", "一般公共场所"}, {"诊所", "一般公共场所"}, {"政务", "一般公共场所"}, {"服务中心", "一般公共场所"},
+	{"体育", "户外活动"}, {"运动", "户外活动"}, {"健身", "户外活动"}, {"露营", "户外活动"},
+	{"骑行", "骑行目的地"}, {"自行车", "骑行目的地"},
+	{"租车", "租车"}, {"汽车租赁", "租车"},
+	{"彩票", "彩票购买点"},
+	{"4S", "车辆维修"}, {"维修", "车辆维修"}, {"汽修", "车辆维修"},
+	{"停车", "暂且休息"}, {"服务区", "暂且休息"}, {"休息区", "暂且休息"},
+	{"公司", "工作"}, {"办公", "工作"}, {"产业园", "工作"}, {"工厂", "工作"},
+	{"塔", "地标"}, {"大桥", "地标"}, {"地标", "地标"}, {"牌坊", "地标"},
+	{"乡镇", "乡镇"}, {"村委会", "乡镇"}, {"街道办", "乡镇"},
+	{"山峰", "山"}, {"峡谷", "山"}, {"雪山", "山"},
+}
+
+// amapActHints 从高德 POI 类型猜活动（高德给的是「大类;小类」形式，按子串匹配）。
+var amapActHints = []actHint{
+	{"咖啡厅", "奶茶和甜甜水"}, {"茶艺馆", "奶茶和甜甜水"}, {"冷饮店", "奶茶和甜甜水"},
+	{"图书馆", "学习"}, {"学校", "学习"}, {"高等院校", "学习"}, {"中学", "学习"}, {"小学", "学习"},
+	{"博物馆", "纪念馆"}, {"展览馆", "纪念馆"}, {"科教文化", "纪念馆"},
+	{"动物园", "动物园"}, {"水族馆", "动物园"},
+	{"海滩", "沙滩"}, {"海滨浴场", "沙滩"},
+	{"风景名胜", "旅游景点"}, {"公园广场", "旅游景点"}, {"寺庙道观", "旅游景点"},
+	{"公园", "散步"}, {"城市广场", "散步"},
+	{"特色街区", "步行街"},
+	{"小吃快餐", "美食街"}, {"美食街", "美食街"}, {"餐饮相关", "美食街"},
+	{"中餐厅", "餐厅"}, {"外国餐厅", "餐厅"}, {"餐厅", "餐厅"}, {"快餐厅", "餐厅"},
+	{"综合市场", "市场"}, {"农副产品市场", "市场"}, {"菜市场", "市场"},
+	{"便利店", "小商店"}, {"超市", "小商店"}, {"专卖店", "小商店"}, {"小商品市场", "小商店"},
+	{"商场", "商场"}, {"购物中心", "商场"}, {"百货商场", "商场"},
+	{"地铁站", "公共交通"}, {"公交车站", "公共交通"}, {"火车站", "公共交通"},
+	{"机场", "公共交通"}, {"港口码头", "公共交通"}, {"长途汽车站", "公共交通"},
+	{"宾馆酒店", "酒店"}, {"旅馆招待所", "酒店"}, {"度假村", "酒店"},
+	{"综合医院", "一般公共场所"}, {"专科医院", "一般公共场所"}, {"诊所", "一般公共场所"},
+	{"政府机关", "一般公共场所"}, {"社会团体", "一般公共场所"},
+	{"运动场馆", "户外活动"}, {"健身中心", "户外活动"}, {"露营地", "户外活动"},
+	{"汽车租赁", "租车"}, {"汽车维修", "车辆维修"}, {"汽车服务", "车辆维修"},
+	{"彩票", "彩票购买点"},
+	{"停车场", "暂且休息"}, {"服务区", "暂且休息"},
+	{"公司", "工作"}, {"写字楼", "工作"}, {"产业园区", "工作"},
+	{"旅游景点", "旅游景点"},
+	{"商务住宅", "家"}, {"住宅区", "家"},
+
+	// 一级大类兜底
+	{"餐饮服务", "餐厅"},
+	{"购物服务", "商场"},
+	{"住宿服务", "酒店"},
+	{"交通设施服务", "公共交通"},
+}
+
+// mkHints 从高德 POI 类型猜 MapKit 类别。
+//
+// 值必须是真机能认的枚举名（`MKPOICategory` + 驼峰）。已确认真机用过的是这 12 种：
+// Restaurant / Store / PublicTransport / Hotel / Landmark / FoodMarket / Beach /
+// Museum / Campground / Zoo / Stadium / Park。其余取 MapKit 的公开枚举名，
+// 万一写错，rond 那边只会显示成原始串，不会损坏数据。
+var mkHints = []actHint{
+	{"咖啡厅", "MKPOICategoryCafe"}, {"茶艺馆", "MKPOICategoryCafe"}, {"冷饮店", "MKPOICategoryCafe"},
+	{"糕饼店", "MKPOICategoryBakery"}, {"面包", "MKPOICategoryBakery"},
+	{"图书馆", "MKPOICategoryLibrary"},
+	{"学校", "MKPOICategorySchool"}, {"中学", "MKPOICategorySchool"}, {"小学", "MKPOICategorySchool"},
+	{"高等院校", "MKPOICategoryUniversity"},
+	{"博物馆", "MKPOICategoryMuseum"}, {"展览馆", "MKPOICategoryMuseum"},
+	{"动物园", "MKPOICategoryZoo"}, {"水族馆", "MKPOICategoryAquarium"},
+	{"海滩", "MKPOICategoryBeach"}, {"海滨浴场", "MKPOICategoryBeach"},
+	{"风景名胜", "MKPOICategoryLandmark"}, {"寺庙道观", "MKPOICategoryLandmark"},
+	{"公园", "MKPOICategoryPark"}, {"城市广场", "MKPOICategoryLandmark"},
+	{"露营地", "MKPOICategoryCampground"},
+	{"综合市场", "MKPOICategoryFoodMarket"}, {"农副产品市场", "MKPOICategoryFoodMarket"},
+	{"便利店", "MKPOICategoryStore"}, {"超市", "MKPOICategoryStore"},
+	{"专卖店", "MKPOICategoryStore"}, {"商场", "MKPOICategoryStore"}, {"购物中心", "MKPOICategoryStore"},
+	{"地铁站", "MKPOICategoryPublicTransport"}, {"公交车站", "MKPOICategoryPublicTransport"},
+	{"火车站", "MKPOICategoryPublicTransport"}, {"港口码头", "MKPOICategoryPublicTransport"},
+	{"长途汽车站", "MKPOICategoryPublicTransport"},
+	{"机场", "MKPOICategoryAirport"},
+	{"宾馆酒店", "MKPOICategoryHotel"}, {"旅馆招待所", "MKPOICategoryHotel"}, {"度假村", "MKPOICategoryHotel"},
+	{"综合医院", "MKPOICategoryHospital"}, {"专科医院", "MKPOICategoryHospital"},
+	{"诊所", "MKPOICategoryHospital"}, {"药房", "MKPOICategoryPharmacy"},
+	{"运动场馆", "MKPOICategoryStadium"}, {"健身中心", "MKPOICategoryFitnessCenter"},
+	{"电影院", "MKPOICategoryMovieTheater"}, {"剧场", "MKPOICategoryTheater"},
+	{"汽车租赁", "MKPOICategoryCarRental"}, {"加油站", "MKPOICategoryGasStation"},
+	{"停车场", "MKPOICategoryParking"},
+	{"银行", "MKPOICategoryBank"}, {"自动取款机", "MKPOICategoryAtm"},
+	{"邮局", "MKPOICategoryPostOffice"}, {"派出所", "MKPOICategoryPolice"},
+	{"中餐厅", "MKPOICategoryRestaurant"}, {"外国餐厅", "MKPOICategoryRestaurant"},
+	{"快餐厅", "MKPOICategoryRestaurant"}, {"餐厅", "MKPOICategoryRestaurant"},
+
+	// 高德的一级大类兜底：小类不认识时至少落到大类上
+	{"餐饮服务", "MKPOICategoryRestaurant"},
+	{"购物服务", "MKPOICategoryStore"},
+	{"住宿服务", "MKPOICategoryHotel"},
+	{"体育休闲服务", "MKPOICategoryStadium"},
+	{"医疗保健服务", "MKPOICategoryHospital"},
+	{"风景名胜", "MKPOICategoryLandmark"},
+	{"交通设施服务", "MKPOICategoryPublicTransport"},
+	{"金融保险服务", "MKPOICategoryBank"},
+}
+
+// trimParens 只看括号外的主体：「尚优居客栈(大理古城步行街店)」是个客栈，
+// 括号里那串只是地址，不该拿它来判断。
+func trimParens(s string) string {
+	if i := strings.IndexAny(s, "(（[【"); i > 0 {
+		return s[:i]
+	}
+	return s
+}
+
+// matchHint 取**最长的**命中词——越长的词越具体。
+//
+// 不用「定义顺序」也不用「出现位置」：前者要求把词表排成一件容易出错的事，
+// 后者会让「马鞍山公园」命中「山」而不是「公园」。长度相同则取先定义的。
+func matchHint(hints []actHint, s string) string {
+	if s == "" {
+		return ""
+	}
+	best, bestLen := "", 0
+	for _, h := range hints {
+		if len(h.kw) > bestLen && strings.Contains(s, h.kw) {
+			best, bestLen = h.val, len(h.kw)
+		}
+	}
+	return best
+}
+
+// matchNameHint 是地名专用的入口：先掐掉括号里的地址再匹配。
+func matchNameHint(hints []actHint, s string) string {
+	return matchHint(hints, trimParens(s))
+}
+
+// guessActivityByName 从地名猜活动，命中表示置信度高。
+func guessActivityByName(name string) string { return matchNameHint(nameActHints, name) }
+
+// matchAmapType 在高德类型串里找映射。高德给的是「大类;小类」，
+// **小类更具体**（「风景名胜;公园」该按公园算，不是风景名胜），所以先试小类再退回大类。
+func matchAmapType(hints []actHint, t string) string {
+	if t == "" {
+		return ""
+	}
+	if i := strings.LastIndexByte(t, ';'); i >= 0 {
+		if v := matchHint(hints, t[i+1:]); v != "" {
+			return v
+		}
+		return matchHint(hints, t[:i])
+	}
+	return matchHint(hints, t)
+}
+
+func guessActivityFromAmapType(t string) string { return matchAmapType(amapActHints, t) }
+
+func guessCategoryFromAmapType(t string) string { return matchAmapType(mkHints, t) }
+
+// knownMKCategories 是真机确认用过的类别，界面上标一下，方便一眼看出哪些是「新猜的」。
+var knownMKCategories = map[string]bool{
+	"MKPOICategoryRestaurant":      true,
+	"MKPOICategoryStore":           true,
+	"MKPOICategoryPublicTransport": true,
+	"MKPOICategoryHotel":           true,
+	"MKPOICategoryLandmark":        true,
+	"MKPOICategoryFoodMarket":      true,
+	"MKPOICategoryBeach":           true,
+	"MKPOICategoryMuseum":          true,
+	"MKPOICategoryCampground":      true,
+	"MKPOICategoryZoo":             true,
+	"MKPOICategoryStadium":         true,
+	"MKPOICategoryPark":            true,
+}
+
+// mkCategoryKnown 报告这个类别真机是否用过。
+func mkCategoryKnown(c string) bool { return knownMKCategories[c] }

internal/web/fillup_rules_test.go

@@ -0,0 +1,108 @@
+package web
+
+import "testing"
+
+// 用例直接用站点里真实存在的地名，规则改坏了这里立刻会响。
+func TestGuessActivityByName(t *testing.T) {
+	cases := []struct{ name, want string }{
+		{"星巴克咖啡", "奶茶和甜甜水"},
+		{"后谷咖啡", "奶茶和甜甜水"},
+		{"花溪十里河滩绿道", "散步"},
+		{"马鞍山公园", "散步"},
+		{"河池市体育馆", "户外活动"},
+		{"喜洲古镇洱海环境监测站", "旅游景点"},
+		{"十里河滩旅游度假区-孔子圣像", "旅游景点"},
+		{"尚优居客栈(大理古城步行街店)", "酒店"}, // 括号里是地址，主体才是客栈
+		{"鑫圣餐厅", "餐厅"},
+		{"彭大花·白族小花园餐厅(广武路店)", "餐厅"},
+		{"大昌盛超市", "小商店"},
+		{"中国福利彩票", "彩票购买点"},
+
+		// 猜不出来的必须留空，交给高德或者人工——宁可空着也别瞎填
+		{"蜜雪冰城", ""},
+		{"昆明站", ""},       // 单字「站」误命中太多，交给高德
+		{"独山路28-17号", ""}, // 路名里有「山」但不是山
+		{"银滩镇", ""},
+		{"傣思蜜清真手抓饭", ""},
+		{"何孃孃小锅米线", ""},
+		{"", ""},
+	}
+	for _, c := range cases {
+		if got := guessActivityByName(c.name); got != c.want {
+			t.Errorf("guessActivityByName(%q) = %q，期望 %q", c.name, got, c.want)
+		}
+	}
+}
+
+func TestGuessCategoryFromAmapType(t *testing.T) {
+	cases := []struct{ typ, want string }{
+		{"餐饮服务;咖啡厅", "MKPOICategoryCafe"},
+		{"餐饮服务;中餐厅", "MKPOICategoryRestaurant"},
+		{"餐饮服务;快餐厅", "MKPOICategoryRestaurant"},
+		{"购物服务;购物中心", "MKPOICategoryStore"},
+		{"购物服务;便利店", "MKPOICategoryStore"},
+		// 小类优先：「风景名胜」是大类，这地方其实是个公园
+		{"风景名胜;公园", "MKPOICategoryPark"},
+		{"住宿服务;宾馆酒店", "MKPOICategoryHotel"},
+		{"交通设施服务;地铁站", "MKPOICategoryPublicTransport"},
+		{"交通设施服务;机场", "MKPOICategoryAirport"},
+		{"体育休闲服务;运动场馆", "MKPOICategoryStadium"},
+		{"医疗保健服务;综合医院", "MKPOICategoryHospital"},
+
+		// 大类命中、小类不认识时退回大类
+		{"购物服务;从未见过的子类", "MKPOICategoryStore"},
+		{"", ""},
+		{"未知;未知", ""},
+	}
+	for _, c := range cases {
+		if got := guessCategoryFromAmapType(c.typ); got != c.want {
+			t.Errorf("guessCategoryFromAmapType(%q) = %q，期望 %q", c.typ, got, c.want)
+		}
+	}
+}
+
+func TestGuessActivityFromAmapType(t *testing.T) {
+	cases := []struct{ typ, want string }{
+		{"餐饮服务;咖啡厅", "奶茶和甜甜水"},
+		{"餐饮服务;小吃快餐", "美食街"},
+		{"购物服务;便利店", "小商店"},
+		{"住宿服务;宾馆酒店", "酒店"},
+		{"风景名胜;公园", "散步"},
+		{"体育休闲服务;运动场馆", "户外活动"},
+		{"未知;未知", ""},
+	}
+	for _, c := range cases {
+		if got := guessActivityFromAmapType(c.typ); got != c.want {
+			t.Errorf("guessActivityFromAmapType(%q) = %q，期望 %q", c.typ, got, c.want)
+		}
+	}
+}
+
+// 类别值必须是真机能认的枚举名，别写出别的形状。
+func TestKnownMKCategoriesShape(t *testing.T) {
+	for c := range knownMKCategories {
+		if len(c) <= len("MKPOICategory") || c[:13] != "MKPOICategory" {
+			t.Errorf("类别 %q 不符合 MKPOICategory<名字> 的形状", c)
+		}
+	}
+	if !mkCategoryKnown("MKPOICategoryRestaurant") {
+		t.Error("真机用过的类别应被认得")
+	}
+	if mkCategoryKnown("MKPOICategoryCafe") {
+		t.Error("这一次新猜的类别不该被算作「真机用过」")
+	}
+}
+
+func TestTrimParens(t *testing.T) {
+	cases := []struct{ in, want string }{
+		{"尚优居客栈(大理古城步行街店)", "尚优居客栈"},
+		{"三哥·思茅菜（北区店）", "三哥·思茅菜"},
+		{"没有括号的名字", "没有括号的名字"},
+		{"开头就是括号的", "开头就是括号的"}, // 整串都是括号开头时不截断，避免截成空串
+	}
+	for _, c := range cases {
+		if got := trimParens(c.in); got != c.want {
+			t.Errorf("trimParens(%q) = %q，期望 %q", c.in, got, c.want)
+		}
+	}
+}

internal/web/fillup_test.go

@@ -0,0 +1,235 @@
+package web
+
+import (
+	"net/http"
+	"net/http/httptest"
+	"net/url"
+	"strconv"
+	"strings"
+	"testing"
+)
+
+// fillupPlace 在测试数据集里造一个「没类别、名下到访全都没活动」的地点。
+func fillupPlace(t *testing.T, f *movementFixture) (placeID int64, placePK int) {
+	t.Helper()
+	const pk = 670001
+	if err := f.pg.QueryRowContext(f.ctx, `INSERT INTO places (dataset_id, src_pk, name, lat, lon)
+		VALUES ($1,$2,'测试补全点',31.1,121.1) RETURNING id`, f.dsID, pk).Scan(&placeID); err != nil {
+		t.Fatalf("建地点失败: %v", err)
+	}
+	for _, vpk := range []int{670002, 670003} {
+		if _, err := f.pg.ExecContext(f.ctx, `INSERT INTO visits
+			(dataset_id, src_pk, place_id, arrival, departure)
+			VALUES ($1,$2,$3,'2026-01-01 10:00:00+08','2026-01-01 11:00:00+08')`,
+			f.dsID, vpk, placeID); err != nil {
+			t.Fatalf("建到访失败: %v", err)
+		}
+	}
+	t.Cleanup(func() {
+		f.pg.ExecContext(f.ctx, `DELETE FROM visits WHERE dataset_id=$1 AND place_id=$2`, f.dsID, placeID)
+		f.pg.ExecContext(f.ctx, `DELETE FROM places WHERE id=$1`, placeID)
+	})
+	return placeID, pk
+}
+
+func applyFillup(t *testing.T, f *movementFixture, form url.Values) string {
+	t.Helper()
+	rec := httptest.NewRecorder()
+	req := httptest.NewRequest("POST", "/admin/fillup/apply", strings.NewReader(form.Encode()))
+	req.Header.Set("Content-Type", "application/x-www-form-urlencoded")
+	f.srv.adminFillupApply(rec, req.WithContext(f.ctx))
+	if rec.Code != http.StatusSeeOther {
+		t.Fatalf("补全应跳回页面: code=%d body=%s", rec.Code, rec.Body.String())
+	}
+	return rec.Header().Get("Location")
+}
+
+// 补活动是按**地点**批量做的：一次把它名下所有没活动的到访一起设，不是只改一条。
+func TestFillupSetsActivityForWholePlace(t *testing.T) {
+	f := newMovementFixture(t)
+	placeID, _ := fillupPlace(t, f)
+
+	acts, err := f.srv.activityOptions(f.ctx, f.dsID)
+	if err != nil || len(acts) == 0 {
+		t.Fatalf("取活动失败: %v", err)
+	}
+	target := acts[0].Name
+
+	loc := applyFillup(t, f, url.Values{
+		"act_" + strconv.FormatInt(placeID, 10): {target},
+	})
+	if strings.Contains(loc, "err=") {
+		t.Fatalf("补全失败: %s", loc)
+	}
+	if n := f.scalar(t, `SELECT count(*) FROM visits WHERE dataset_id=$1 AND place_id=$2
+		AND activity_id IS NULL`, f.dsID, placeID); n != 0 {
+		t.Fatalf("该地点两条到访都该设上活动，还剩 %d 条没设", n)
+	}
+	var got string
+	if err := f.pg.QueryRowContext(f.ctx, `SELECT a.name FROM visits v JOIN activities a ON a.id=v.activity_id
+		WHERE v.dataset_id=$1 AND v.place_id=$2 LIMIT 1`, f.dsID, placeID).Scan(&got); err != nil {
+		t.Fatalf("读活动失败: %v", err)
+	}
+	if got != target {
+		t.Fatalf("活动应为 %q，实际 %q", target, got)
+	}
+}
+
+// 「只填空」：已经有值的一律不动，哪怕表单里填了别的。
+func TestFillupNeverOverwrites(t *testing.T) {
+	f := newMovementFixture(t)
+	placeID, _ := fillupPlace(t, f)
+
+	// 先给一条到访设好活动，给地点设好类别
+	acts, _ := f.srv.activityOptions(f.ctx, f.dsID)
+	first := acts[0].Name
+	second := "补全测试活动"
+	if len(acts) > 1 {
+		second = acts[1].Name
+	}
+	if _, err := f.pg.ExecContext(f.ctx, `UPDATE visits SET activity_id=$1
+		WHERE dataset_id=$2 AND place_id=$3 AND src_pk=670002`,
+		acts[0].ID, f.dsID, placeID); err != nil {
+		t.Fatalf("预置活动失败: %v", err)
+	}
+	if _, err := f.pg.ExecContext(f.ctx, `UPDATE places SET poi_category='MKPOICategoryPark'
+		WHERE id=$1`, placeID); err != nil {
+		t.Fatalf("预置类别失败: %v", err)
+	}
+
+	applyFillup(t, f, url.Values{
+		"act_" + strconv.FormatInt(placeID, 10): {second},
+		"cat_" + strconv.FormatInt(placeID, 10): {"MKPOICategoryZoo"},
+	})
+
+	// 原来那条不能被改掉
+	var got string
+	if err := f.pg.QueryRowContext(f.ctx, `SELECT a.name FROM visits v JOIN activities a ON a.id=v.activity_id
+		WHERE v.dataset_id=$1 AND v.place_id=$2 AND v.src_pk=670002`, f.dsID, placeID).Scan(&got); err != nil {
+		t.Fatalf("读活动失败: %v", err)
+	}
+	if got != first {
+		t.Fatalf("已有活动的到访不该被改：期望 %q，实际 %q", first, got)
+	}
+	// 已经填过的类别也不能被覆盖
+	var cat string
+	if err := f.pg.QueryRowContext(f.ctx, `SELECT COALESCE(poi_category,'') FROM places WHERE id=$1`, placeID).Scan(&cat); err != nil {
+		t.Fatalf("读类别失败: %v", err)
+	}
+	if cat != "MKPOICategoryPark" {
+		t.Fatalf("已有类别不该被覆盖，实际 %q", cat)
+	}
+	// 但另一条原本没活动的到访应当补上：这个地点不该再有无活动的到访
+	if n := f.scalar(t, `SELECT count(*) FROM visits WHERE dataset_id=$1 AND place_id=$2
+		AND activity_id IS NULL`, f.dsID, placeID); n != 0 {
+		t.Fatalf("原本没活动的那条应当补上，还剩 %d 条没设", n)
+	}
+}
+
+// 填一个现有列表里没有的名字，应当自动建成新的活动类型（用户要的「匹配不上就新增」）。
+func TestFillupCreatesUnknownActivity(t *testing.T) {
+	f := newMovementFixture(t)
+	placeID, _ := fillupPlace(t, f)
+	before := f.scalar(t, `SELECT count(*) FROM activities WHERE dataset_id=$1`, f.dsID)
+
+	applyFillup(t, f, url.Values{"act_" + strconv.FormatInt(placeID, 10): {"洗碗机测试活动"}})
+
+	if n := f.scalar(t, `SELECT count(*) FROM activities WHERE dataset_id=$1 AND name=$2`,
+		f.dsID, "洗碗机测试活动"); n != 1 {
+		t.Fatalf("该新建一个活动类型，实际 %d 个", n)
+	}
+	if n := f.scalar(t, `SELECT count(*) FROM activities WHERE dataset_id=$1`, f.dsID); n != before+1 {
+		t.Fatalf("活动总数应 +1，实际 %d（原 %d）", n, before)
+	}
+	t.Cleanup(func() {
+		f.pg.ExecContext(f.ctx, `DELETE FROM activities WHERE dataset_id=$1 AND name=$2`, f.dsID, "洗碗机测试活动")
+	})
+}
+
+func itoa(v int64) string {
+	return strings.TrimSpace(strings.ReplaceAll(strings.Trim(strings.Join([]string{}, ""), " "), " ", "")) + intToString(v)
+}
+
+func intToString(v int64) string {
+	if v == 0 {
+		return "0"
+	}
+	neg := v < 0
+	if neg {
+		v = -v
+	}
+	var b []byte
+	for v > 0 {
+		b = append([]byte{byte('0' + v%10)}, b...)
+		v /= 10
+	}
+	if neg {
+		return "-" + string(b)
+	}
+	return string(b)
+}
+
+func TestClampPage(t *testing.T) {
+	cases := []struct {
+		raw   string
+		count int
+		want  int
+	}{
+		{"", 8, 1},
+		{"1", 8, 1},
+		{"8", 8, 8},
+		{"999", 8, 8}, // 超了就停在最后一页，别给空白页
+		{"0", 8, 1},
+		{"-3", 8, 1},
+		{"abc", 8, 1},
+		{"3", 0, 3}, // 没有数据时不夹（总会在最后回到 1）
+	}
+	for _, c := range cases {
+		if got := clampPage(c.raw, c.count); got != c.want {
+			t.Errorf("clampPage(%q, %d) = %d，期望 %d", c.raw, c.count, got, c.want)
+		}
+	}
+}
+
+// 每页只渲染 30 行；页码越界时夹回最后一页。
+func TestFillupPagination(t *testing.T) {
+	f := newMovementFixture(t)
+	// 造 35 个「缺类别」的地点，凑出两页
+	for i := 0; i < 35; i++ {
+		pk := 680000 + i
+		if _, err := f.pg.ExecContext(f.ctx, `INSERT INTO places (dataset_id, src_pk, name, lat, lon)
+			VALUES ($1,$2,$3,$4,$5)`, f.dsID, pk, "分页测试点", 30.0+float64(i)*0.001, 120.0); err != nil {
+			t.Fatalf("造地点失败: %v", err)
+		}
+	}
+	t.Cleanup(func() {
+		f.pg.ExecContext(f.ctx, `DELETE FROM places WHERE dataset_id=$1 AND src_pk BETWEEN 680000 AND 680099`, f.dsID)
+	})
+
+	countRows := func(url string) (rows, pageCount int) {
+		t.Helper()
+		rec := httptest.NewRecorder()
+		req := httptest.NewRequest("GET", url, nil).WithContext(f.ctx)
+		f.srv.adminFillupPage(rec, req)
+		if rec.Code != http.StatusOK {
+			t.Fatalf("%s 渲染失败: %d", url, rec.Code)
+		}
+		body := rec.Body.String()
+		return strings.Count(body, `name="cat_`), strings.Count(body, `class="pager"`)
+	}
+
+	rows, pagers := countRows("/admin/fillup")
+	if rows != fillupPerPage {
+		t.Fatalf("第 1 页应有 %d 行，实际 %d", fillupPerPage, rows)
+	}
+	if pagers == 0 {
+		t.Error("多于 1 页时应出现分页控件")
+	}
+	if rows, _ := countRows("/admin/fillup?page=2"); rows == 0 || rows > fillupPerPage {
+		t.Fatalf("第 2 页行数异常: %d", rows)
+	}
+	// 越界页码要夹回最后一页，而不是给一页空白
+	if rows, _ := countRows("/admin/fillup?page=9999"); rows == 0 {
+		t.Error("越界页码应夹到最后一页，不该是空白页")
+	}
+}

internal/web/fog.go

@@ -3,11 +3,13 @@ package web
 import (
 	"bytes"
 	"context"
+	"errors"
 	"fmt"
 	"image"
 	"image/png"
 	"io"
 	"log"
+	"math"
 	"net/http"
 	"path/filepath"
 	"sort"
@@ -111,41 +113,57 @@ func fogTileCacheControl(isAdmin bool) string {
 	return "public, max-age=3600"
 }
 
-// adminFogUpload 导入 .fwss：mode=overlay 按位或合并进现有迷雾，
+// readFogSnapshot 从 multipart 表单里读出 .fwss 的字节并做基本校验。
-// mode=cover 清空后整体替换。
+func readFogSnapshot(w http.ResponseWriter, r *http.Request) ([]byte, error) {
-func (s *Server) adminFogUpload(w http.ResponseWriter, r *http.Request) {
-	ctx := r.Context()
-	u := userFrom(ctx)
 	r.Body = http.MaxBytesReader(w, r.Body, maxFogUploadBytes+1<<20)
 	if err := r.ParseMultipartForm(32 << 20); err != nil {
-		s.adminFlash(w, r, "err", "读取上传内容失败："+err.Error())
+		return nil, fmt.Errorf("读取上传内容失败：%w", err)
-		return
 	}
 	file, hdr, err := r.FormFile("fwss")
 	if err != nil {
-		s.adminFlash(w, r, "err", "请选择要上传的 .fwss 迷雾快照")
+		return nil, errors.New("请选择要上传的 .fwss 迷雾快照")
-		return
 	}
 	defer file.Close()
 	name := strings.ToLower(filepath.Base(hdr.Filename))
 	if !strings.HasSuffix(name, ".fwss") && !strings.HasSuffix(name, ".zip") {
-		s.adminFlash(w, r, "err", "文件类型不正确，请上传 Fog of World 导出的 .fwss 快照")
+		return nil, errors.New("文件类型不正确，请上传 Fog of World 导出的 .fwss 快照")
-		return
 	}
+	data, err := io.ReadAll(io.LimitReader(file, maxFogUploadBytes+1))
+	if err != nil {
+		return nil, fmt.Errorf("读取文件失败：%w", err)
+	}
+	if int64(len(data)) > maxFogUploadBytes {
+		return nil, errors.New("迷雾快照超过 64MB，疑似文件有误")
+	}
+	return data, nil
+}
+
+// adminFogUpload 导入 .fwss：mode=overlay 按位或合并进现有迷雾，
+// mode=cover 清空后整体替换。
+//
+// 带 stash 令牌的请求来自差异页的确认按钮，快照已经在暂存目录里，
+// 不用让浏览器把几十 MB 再传一遍。
+func (s *Server) adminFogUpload(w http.ResponseWriter, r *http.Request) {
+	ctx := r.Context()
+	u := userFrom(ctx)
 	mode := r.PostFormValue("mode")
 	if mode != "overlay" && mode != "cover" {
 		mode = "overlay"
 	}
 
-	data, err := io.ReadAll(io.LimitReader(file, maxFogUploadBytes+1))
+	token := r.URL.Query().Get("stash")
-	if err != nil {
+	var data []byte
-		s.adminFlash(w, r, "err", "读取文件失败："+err.Error())
+	var err error
+	if token != "" {
+		if data, err = s.loadStashedFog(token); err != nil {
+			s.adminFlash(w, r, "err", err.Error())
 			return
 		}
-	if int64(len(data)) > maxFogUploadBytes {
+	} else if data, err = readFogSnapshot(w, r); err != nil {
-		s.adminFlash(w, r, "err", "迷雾快照超过 64MB，疑似文件有误")
+		s.adminFlash(w, r, "err", err.Error())
 		return
 	}
+
 	blocks, cells, err := fog.Decode(data)
 	if err != nil {
 		s.adminFlash(w, r, "err", "解析迷雾快照失败："+err.Error())
@@ -181,10 +199,125 @@ func (s *Server) adminFogUpload(w http.ResponseWriter, r *http.Request) {
 	if mode == "cover" {
 		verb = "整体替换"
 	}
+	// 导入成功才丢掉暂存件；失败时留着，站长可以回差异页重试
+	if token != "" {
+		s.dropStashedFog(token)
+	}
 	s.adminFlash(w, r, "ok", fmt.Sprintf(
 		"迷雾导入成功（%s）：本次写入 %d 块 / %d 格，当前共 %d 块 / %d 格", verb, applied, cells, b, c))
 }
 
+// adminFogPreview 先把快照收下暂存，不写库，跳到差异页——
+// 叠加能补多少、整体替换会丢多少，都得让站长在下手之前看见。
+func (s *Server) adminFogPreview(w http.ResponseWriter, r *http.Request) {
+	data, err := readFogSnapshot(w, r)
+	if err != nil {
+		s.adminFlash(w, r, "err", err.Error())
+		return
+	}
+	// 先解一遍确认是真快照，免得把坏文件暂存下来、到差异页才发现
+	if _, _, err := fog.Decode(data); err != nil {
+		s.adminFlash(w, r, "err", "解析迷雾快照失败："+err.Error())
+		return
+	}
+	token, err := s.stashFog(data)
+	if err != nil {
+		s.serverError(w, r, err)
+		return
+	}
+	http.Redirect(w, r, "/admin/fog/preview/"+token, http.StatusSeeOther)
+}
+
+// adminFogPreviewPage 渲染差异页。每次都重新算一遍：库里可能刚被别的操作改过。
+func (s *Server) adminFogPreviewPage(w http.ResponseWriter, r *http.Request) {
+	p, err := s.pageBase(r, "admin", "迷雾导入预览")
+	if err != nil {
+		s.serverError(w, r, err)
+		return
+	}
+	token := r.PathValue("token")
+	data, err := s.loadStashedFog(token)
+	if err != nil {
+		s.adminFlash(w, r, "err", err.Error())
+		return
+	}
+	blocks, _, err := fog.Decode(data)
+	if err != nil {
+		s.adminFlash(w, r, "err", "解析迷雾快照失败："+err.Error())
+		return
+	}
+	if len(blocks) == 0 {
+		s.adminFlash(w, r, "err", "快照里没有找到迷雾瓦片数据")
+		return
+	}
+	layers, err := fog.RawLayers(data)
+	if err != nil {
+		log.Printf("解析快照的其它图层失败: %v", err)
+	}
+	ix, err := s.fogIndex()
+	if err != nil {
+		s.serverError(w, r, err)
+		return
+	}
+	var cur []fog.Block
+	ix.View(func(m map[[2]int][]byte) {
+		cur = make([]fog.Block, 0, len(m))
+		for k, bm := range m {
+			cur = append(cur, fog.Block{GX: k[0], GY: k[1], Bitmap: bm})
+		}
+	})
+	tilde, hash, other := fogLayerCounts(layers)
+	d := FogPreviewData{
+		Page: p, Token: token, Diff: fog.DiffBlocks(cur, blocks),
+		TildeLayers: tilde, HashLayers: hash, OtherLayers: other,
+	}
+	d.MinLat, d.MinLon, d.MaxLat, d.MaxLon, d.HasBounds = diffBounds(cur, blocks, s.cfg.MapCRS)
+	// 布局按这个标记引入 Leaflet，漏了地图整块不出现
+	d.Page.HasMap = d.HasBounds
+	s.render(w, "admin/fog-preview", d)
+}
+
+// diffBounds 返回两边块集覆盖范围的包围盒，供差异地图定位。迷雾网格是 WGS-84，
+// 高德这类底图按 GCJ-02 摆放，所以坐标要跟着底图走，否则视野会偏出几百米。
+func diffBounds(cur, inc []fog.Block, crs string) (minLat, minLon, maxLat, maxLon float64, ok bool) {
+	visit := func(gbx, gby int) {
+		lat, lon := fog.BlockLonLat(gbx, gby)
+		if crs == "gcj02" {
+			lat, lon = geo.WGS84ToGCJ02(lat, lon)
+		}
+		if !ok {
+			minLat, maxLat, minLon, maxLon, ok = lat, lat, lon, lon, true
+			return
+		}
+		minLat, maxLat = math.Min(minLat, lat), math.Max(maxLat, lat)
+		minLon, maxLon = math.Min(minLon, lon), math.Max(maxLon, lon)
+	}
+	for _, b := range cur {
+		visit(b.GX, b.GY)
+	}
+	for _, b := range inc {
+		visit(b.GX, b.GY)
+	}
+	return
+}
+
+// fogLayerCounts 按前缀归类快照里「已探索层之外」的条目。
+// Model/~ 与 Model/# 两层站点不解析、只原样留存，但整体替换会把它们一并换掉，
+// 差异页要把这件事说清楚。
+func fogLayerCounts(layers map[string][]byte) (tilde, hash, other int) {
+	for p := range layers {
+		switch {
+		case strings.HasPrefix(p, "Model/~/") || strings.HasPrefix(p, "Model~/"):
+			tilde++
+		case strings.HasPrefix(p, "Model/#/") || strings.HasPrefix(p, "Model#/"):
+			hash++
+		default:
+			other++
+		}
+	}
+	return
+}
+
 // ---------- 迷雾覆盖率 ----------
 
 // FogCity 是单个城市（或省份）的迷雾点亮统计：地点里有多少个落在已探索格内。

internal/web/fog_diff.go

@@ -0,0 +1,94 @@
+package web
+
+import (
+	"bytes"
+	"image/png"
+	"net/http"
+	"strconv"
+	"sync"
+	"time"
+
+	"rond-with-you/internal/fog"
+)
+
+// 差异瓦片要反复读同一份快照、同一份库内迷雾，单槽缓存住两边的块集即可——
+// 站长一次只会看一份预览。缓存里的 map 加载完就只读，渲染时并发遍历是安全的。
+var (
+	diffSetsMu    sync.Mutex
+	diffSetsToken string
+	diffSetsAt    time.Time
+	diffSetsCur   map[[2]int][]byte
+	diffSetsInc   map[[2]int][]byte
+)
+
+// diffSetsTTL 短于暂存的 2 小时：库内迷雾随时可能被别的操作改掉，
+// 缓存太久会让差异图与页面上那组数字对不上。
+const diffSetsTTL = 10 * time.Minute
+
+func (s *Server) fogDiffSets(token string) (cur, inc map[[2]int][]byte, err error) {
+	diffSetsMu.Lock()
+	defer diffSetsMu.Unlock()
+	if token == diffSetsToken && time.Since(diffSetsAt) < diffSetsTTL {
+		return diffSetsCur, diffSetsInc, nil
+	}
+	data, err := s.loadStashedFog(token)
+	if err != nil {
+		return nil, nil, err
+	}
+	blocks, _, err := fog.Decode(data)
+	if err != nil {
+		return nil, nil, err
+	}
+	ix, err := s.fogIndex()
+	if err != nil {
+		return nil, nil, err
+	}
+	cur = map[[2]int][]byte{}
+	ix.View(func(m map[[2]int][]byte) {
+		for k, bm := range m {
+			cur[k] = bm
+		}
+	})
+	inc = make(map[[2]int][]byte, len(blocks))
+	for _, b := range blocks {
+		inc[[2]int{b.GX, b.GY}] = b.Bitmap
+	}
+	diffSetsToken, diffSetsCur, diffSetsInc, diffSetsAt = token, cur, inc, time.Now()
+	return cur, inc, nil
+}
+
+// adminFogDiffTile 渲染一张差异瓦片：绿=叠加会新增、灰=两边都有、红=整体替换会丢。
+// 只给站长看，不涉及遮罩。
+func (s *Server) adminFogDiffTile(w http.ResponseWriter, r *http.Request) {
+	z, err1 := strconv.Atoi(r.PathValue("z"))
+	x, err2 := strconv.Atoi(r.PathValue("x"))
+	y, err3 := strconv.Atoi(r.PathValue("y"))
+	if err1 != nil || err2 != nil || err3 != nil || z < 0 || z > 22 ||
+		x < 0 || y < 0 || x >= 1<<uint(z) || y >= 1<<uint(z) {
+		http.NotFound(w, r)
+		return
+	}
+	cur, inc, err := s.fogDiffSets(r.PathValue("token"))
+	if err != nil {
+		http.NotFound(w, r)
+		return
+	}
+	crs := r.URL.Query().Get("crs")
+	if crs != "gcj02" && crs != "wgs84" {
+		crs = s.cfg.MapCRS
+	}
+	img := fog.RenderDiffTile(cur, inc, z, x, y, crs)
+	if img == nil {
+		http.NotFound(w, r)
+		return
+	}
+	var buf bytes.Buffer
+	if err := png.Encode(&buf, img); err != nil {
+		s.serverError(w, r, err)
+		return
+	}
+	w.Header().Set("Content-Type", "image/png")
+	// 令牌是一次性的，内容也只给站长看，不落共享缓存
+	w.Header().Set("Cache-Control", "private, max-age=300")
+	w.Write(buf.Bytes())
+}

internal/web/fog_preview_test.go

@@ -0,0 +1,422 @@
+package web
+
+import (
+	"bytes"
+	"context"
+	"database/sql"
+	"fmt"
+	"image"
+	"image/png"
+	"mime/multipart"
+	"net/http"
+	"net/http/httptest"
+	"os"
+	"path/filepath"
+	"strconv"
+	"strings"
+	"testing"
+	"time"
+
+	"rond-with-you/internal/auth"
+	"rond-with-you/internal/config"
+	"rond-with-you/internal/db"
+	"rond-with-you/internal/fog"
+)
+
+// fogPreviewFixture 是一个迷雾为空、带一次性账号的测试库。
+//
+//	ROND_TEST_CONF=conf/app-test.ini go test ./internal/web -run FogPreview -v
+//
+// 迷雾是站点级数据（公开读路径不区分归属），所以测试必须从空库出发；
+// 用的是独立测试库（rond_fog_test），不会碰到开发库里的迷雾。
+type fogPreviewFixture struct {
+	cfg *config.Config
+	pg  *sql.DB
+	srv *Server
+	ctx context.Context
+	uid int64
+	ix  *fog.Index
+}
+
+func newFogPreviewFixture(t *testing.T) *fogPreviewFixture {
+	t.Helper()
+	confPath := os.Getenv("ROND_TEST_CONF")
+	if confPath == "" {
+		t.Skip("设置 ROND_TEST_CONF 后运行迷雾导入校验")
+	}
+	chdirModuleRoot(t)
+	cfg, err := config.Load(confPath)
+	if err != nil {
+		t.Fatalf("加载配置 %s 失败: %v", confPath, err)
+	}
+	ctx := context.Background()
+	pg, err := db.Open(cfg.DSN)
+	if err != nil {
+		t.Fatalf("连接数据库失败: %v", err)
+	}
+	t.Cleanup(func() { pg.Close() })
+	if err := db.Migrate(ctx, pg); err != nil {
+		t.Fatalf("初始化数据库失败: %v", err)
+	}
+
+	user := fmt.Sprintf("e2e-fogpreview-%d", time.Now().UnixNano())
+	hash, err := auth.HashPassword("e2e-password")
+	if err != nil {
+		t.Fatalf("生成口令哈希失败: %v", err)
+	}
+	var uid int64
+	if err := pg.QueryRowContext(ctx, `INSERT INTO users (username, password_hash, display_name)
+		VALUES ($1,$2,'e2e') RETURNING id`, user, hash).Scan(&uid); err != nil {
+		t.Fatalf("创建测试账号失败: %v", err)
+	}
+	clearFog(t, ctx, pg)
+	t.Cleanup(func() {
+		clearFog(t, ctx, pg)
+		pg.ExecContext(ctx, `DELETE FROM users WHERE id=$1`, uid)
+		os.RemoveAll(filepath.Join(cfg.DataDir, "fog-staging"))
+		fogResetIndex()
+	})
+
+	srv, err := New(cfg, pg)
+	if err != nil {
+		t.Fatalf("初始化服务失败: %v", err)
+	}
+	f := &fogPreviewFixture{cfg: cfg, pg: pg, srv: srv, uid: uid,
+		ctx: ctxWithUser(&auth.User{ID: uid, Username: user})}
+	f.ix = f.reloadIndex(t)
+	return f
+}
+
+func clearFog(t *testing.T, ctx context.Context, pg *sql.DB) {
+	t.Helper()
+	for _, q := range []string{`DELETE FROM fog_blocks`, `DELETE FROM fog_raw_files`} {
+		if _, err := pg.ExecContext(ctx, q); err != nil {
+			t.Fatalf("清空迷雾失败: %v", err)
+		}
+	}
+}
+
+// reloadIndex 让内存索引与库对齐：fogIndex 的首次加载只跑一次（sync.Once），
+// 测试里反复清库写库，必须手动同步，否则差异页算的是上一轮的残留。
+func (f *fogPreviewFixture) reloadIndex(t *testing.T) *fog.Index {
+	t.Helper()
+	ix, err := f.srv.fogIndex()
+	if err != nil {
+		t.Fatalf("获取迷雾索引失败: %v", err)
+	}
+	if err := ix.LoadAll(f.pg); err != nil {
+		t.Fatalf("重载迷雾索引失败: %v", err)
+	}
+	return ix
+}
+
+// upload 走后台真实的上传处理函数，返回差异页的令牌。
+func (f *fogPreviewFixture) upload(t *testing.T, data []byte) string {
+	t.Helper()
+	rec := httptest.NewRecorder()
+	f.srv.adminFogPreview(rec, fogUploadRequest(t, data).WithContext(f.ctx))
+	if rec.Code != http.StatusSeeOther {
+		t.Fatalf("上传应跳转到差异页: code=%d body=%s", rec.Code, rec.Body.String())
+	}
+	loc := rec.Header().Get("Location")
+	token := strings.TrimPrefix(loc, "/admin/fog/preview/")
+	if token == loc || len(token) != fogStashTokenLen {
+		t.Fatalf("差异页地址不对: %q", loc)
+	}
+	return token
+}
+
+// preview 渲染差异页。
+func (f *fogPreviewFixture) preview(t *testing.T, token string) string {
+	t.Helper()
+	rec := httptest.NewRecorder()
+	req := httptest.NewRequest("GET", "/admin/fog/preview/"+token, nil).WithContext(f.ctx)
+	req.SetPathValue("token", token)
+	f.srv.adminFogPreviewPage(rec, req)
+	if rec.Code != http.StatusOK {
+		t.Fatalf("差异页渲染失败: code=%d body=%s", rec.Code, rec.Body.String())
+	}
+	return rec.Body.String()
+}
+
+// confirm 走差异页确认按钮那条路径：带 stash 令牌、只提交 mode。
+func (f *fogPreviewFixture) confirm(t *testing.T, token, mode string) {
+	t.Helper()
+	rec := httptest.NewRecorder()
+	req := httptest.NewRequest("POST", "/admin/fog?stash="+token, strings.NewReader("mode="+mode))
+	req.Header.Set("Content-Type", "application/x-www-form-urlencoded")
+	f.srv.adminFogUpload(rec, req.WithContext(f.ctx))
+	if rec.Code != http.StatusSeeOther {
+		t.Fatalf("确认导入应跳回后台: code=%d body=%s", rec.Code, rec.Body.String())
+	}
+	if loc := rec.Header().Get("Location"); !strings.HasPrefix(loc, "/admin?ok=") {
+		t.Fatalf("确认导入应报成功: %s", loc)
+	}
+}
+
+func (f *fogPreviewFixture) cells(t *testing.T) int {
+	t.Helper()
+	_, cells := f.reloadIndex(t).Stats()
+	return cells
+}
+
+func (f *fogPreviewFixture) blocks(t *testing.T) int {
+	t.Helper()
+	blocks, _ := f.reloadIndex(t).Stats()
+	return blocks
+}
+
+// TestFogPreviewShowsDiffBeforeWriting 端到端验证「上传 → 差异页 → 确认导入」：
+// 差异页必须先把两种模式的后果摆出来，而且在上传那一刻格子里一行都不能写。
+func TestFogPreviewShowsDiffBeforeWriting(t *testing.T) {
+	f := newFogPreviewFixture(t)
+
+	// 库里先有一块 3 格的区域
+	if _, err := f.ix.Import(f.pg, f.uid, []fog.Block{
+		newFogBlock(100, 200, [2]int{0, 0}, [2]int{1, 0}, [2]int{2, 0}),
+	}, false); err != nil {
+		t.Fatalf("预置迷雾失败: %v", err)
+	}
+
+	// 新快照：同一块补亮 2 格，外加一整块新的
+	inc := []fog.Block{
+		newFogBlock(100, 200, [2]int{0, 0}, [2]int{1, 0}, [2]int{2, 0}, [2]int{5, 5}, [2]int{6, 5}),
+		newFogBlock(101, 200, [2]int{1, 1}),
+	}
+	data, err := fog.Encode(inc, map[string][]byte{
+		"Model/~/aaa": {1, 2, 3},
+		"Model/#/bbb": {4, 5, 6},
+	})
+	if err != nil {
+		t.Fatalf("构造快照失败: %v", err)
+	}
+
+	token := f.upload(t, data)
+
+	// 差异页只是预览：格数必须还是 3
+	if got := f.cells(t); got != 3 {
+		t.Fatalf("上传阶段不该写库，当前格数 %d", got)
+	}
+
+	page := f.preview(t, token)
+	for _, want := range []string{
+		"迷雾导入预览",
+		"叠加导入",
+		"整体替换",
+		"会补上当前迷雾没有的", // 叠加卡片给出的实际收益
+		"替换不会丢数据",    // 库里的 3 格都在快照里
+		"Model/~",    // 图层提示
+		"/admin/fog?stash=" + token,
+		`value="overlay"`,
+		`value="cover"`,
+	} {
+		if !strings.Contains(page, want) {
+			t.Errorf("差异页缺少 %q", want)
+		}
+	}
+	if strings.Contains(page, "完全覆盖") {
+		t.Error("这份快照有新内容，不该报「已被完全覆盖」")
+	}
+
+	// 确认叠加：3 格 + 补亮的 2 格 + 新块 1 格 = 6 格，两块
+	f.confirm(t, token, "overlay")
+	if got := f.cells(t); got != 6 {
+		t.Fatalf("叠加后应有 6 格，实际 %d", got)
+	}
+	if got := f.blocks(t); got != 2 {
+		t.Fatalf("叠加后应有 2 块，实际 %d", got)
+	}
+}
+
+// TestFogPreviewWarnsBeforeCoverLosesData 整体替换必须在下手前算出「会丢多少」，
+// 并且差异页要看得出这份快照已经被完全覆盖过（叠加没有意义）。
+func TestFogPreviewWarnsBeforeCoverLosesData(t *testing.T) {
+	f := newFogPreviewFixture(t)
+
+	// 库里两块共 5 格
+	if _, err := f.ix.Import(f.pg, f.uid, []fog.Block{
+		newFogBlock(100, 200, [2]int{0, 0}, [2]int{1, 0}, [2]int{2, 0}),
+		newFogBlock(101, 200, [2]int{7, 7}, [2]int{8, 8}),
+	}, false); err != nil {
+		t.Fatalf("预置迷雾失败: %v", err)
+	}
+
+	// 快照只有第一块、且一格不多：叠加零收益，替换会丢掉第二块的两格
+	inc := []fog.Block{newFogBlock(100, 200, [2]int{0, 0}, [2]int{1, 0}, [2]int{2, 0})}
+	data, err := fog.Encode(inc, nil)
+	if err != nil {
+		t.Fatalf("构造快照失败: %v", err)
+	}
+	token := f.upload(t, data)
+
+	page := f.preview(t, token)
+	for _, want := range []string{
+		"已经被当前迷雾", // 叠加无收益
+		"从点亮变回未探索",
+		"Model/~", // 快照没有这两层，替换会清掉现有的
+	} {
+		if !strings.Contains(page, want) {
+			t.Errorf("差异页缺少 %q", want)
+		}
+	}
+
+	// 确认整体替换：只该剩下快照里的 1 块 3 格
+	f.confirm(t, token, "cover")
+	if got := f.cells(t); got != 3 {
+		t.Fatalf("替换后应有 3 格，实际 %d", got)
+	}
+	if got := f.blocks(t); got != 1 {
+		t.Fatalf("替换后应有 1 块，实际 %d", got)
+	}
+
+	// 暂存件用掉就该删掉，且过期令牌不该还能用
+	if _, err := os.Stat(filepath.Join(f.cfg.DataDir, "fog-staging", token+".fwss")); !os.IsNotExist(err) {
+		t.Error("确认导入后应删除暂存文件")
+	}
+	rec := httptest.NewRecorder()
+	req := httptest.NewRequest("GET", "/admin/fog/preview/"+token, nil).WithContext(f.ctx)
+	req.SetPathValue("token", token)
+	f.srv.adminFogPreviewPage(rec, req)
+	if rec.Code != http.StatusSeeOther {
+		t.Fatalf("过期令牌应跳回后台报错: code=%d", rec.Code)
+	}
+}
+
+// 差异瓦片要按请求坐标渲染出正确的三色，并挡住越界坐标与过期令牌。
+func TestFogDiffTileColors(t *testing.T) {
+	f := newFogPreviewFixture(t)
+	if _, err := f.ix.Import(f.pg, f.uid, []fog.Block{
+		newFogBlock(100, 200, [2]int{0, 0}, [2]int{4, 0}),
+	}, false); err != nil {
+		t.Fatalf("预置迷雾失败: %v", err)
+	}
+	data, err := fog.Encode([]fog.Block{newFogBlock(100, 200, [2]int{0, 0}, [2]int{1, 0})}, nil)
+	if err != nil {
+		t.Fatalf("构造快照失败: %v", err)
+	}
+	token := f.upload(t, data)
+
+	// z=18 时一格 16 像素，块 (100,200) 完整落在瓦片 (400,800) 里
+	img := f.diffTile(t, token, 18, 400, 800)
+	if got := kindOf(pixAtImg(img, 8, 8)); got != "both" {
+		t.Errorf("两边都有的格应为灰色，实际 %s", got)
+	}
+	if got := kindOf(pixAtImg(img, 24, 8)); got != "gain" {
+		t.Errorf("只有快照有的格应为绿色，实际 %s", got)
+	}
+	if got := kindOf(pixAtImg(img, 72, 8)); got != "lost" {
+		t.Errorf("只有库里有、替换会丢的格应为红色，实际 %s", got)
+	}
+	if got := kindOf(pixAtImg(img, 200, 200)); got != "none" {
+		t.Errorf("没探索过的格应为透明，实际 %s", got)
+	}
+
+	// 越界坐标与过期令牌都只给 404，不能穿透到渲染
+	for _, c := range []struct{ z, x, y string }{
+		{"18", "262144", "0"}, // x 已达该级别的上限
+		{"18", "0", "-1"},
+		{"99", "0", "0"}, // z 越界
+	} {
+		rec := httptest.NewRecorder()
+		req := httptest.NewRequest("GET", "/admin/fog/preview/"+token+"/x", nil).WithContext(f.ctx)
+		req.SetPathValue("token", token)
+		req.SetPathValue("z", c.z)
+		req.SetPathValue("x", c.x)
+		req.SetPathValue("y", c.y)
+		f.srv.adminFogDiffTile(rec, req)
+		if rec.Code != http.StatusNotFound {
+			t.Errorf("越界坐标 %v 应给 404，实际 %d", c, rec.Code)
+		}
+	}
+
+	rec := httptest.NewRecorder()
+	req := httptest.NewRequest("GET", "/admin/fog/preview/deadbeef/18/400/800", nil).WithContext(f.ctx)
+	req.SetPathValue("token", strings.Repeat("f", 32))
+	req.SetPathValue("z", "18")
+	req.SetPathValue("x", "400")
+	req.SetPathValue("y", "800")
+	f.srv.adminFogDiffTile(rec, req)
+	if rec.Code != http.StatusNotFound {
+		t.Errorf("无效令牌应给 404，实际 %d", rec.Code)
+	}
+}
+
+func (f *fogPreviewFixture) diffTile(t *testing.T, token string, z, x, y int) image.Image {
+	t.Helper()
+	rec := httptest.NewRecorder()
+	req := httptest.NewRequest("GET", fmt.Sprintf("/admin/fog/preview/%s/%d/%d/%d?crs=wgs84", token, z, x, y), nil).
+		WithContext(f.ctx)
+	req.SetPathValue("token", token)
+	req.SetPathValue("z", strconv.Itoa(z))
+	req.SetPathValue("x", strconv.Itoa(x))
+	req.SetPathValue("y", strconv.Itoa(y))
+	f.srv.adminFogDiffTile(rec, req)
+	if rec.Code != http.StatusOK {
+		t.Fatalf("差异瓦片渲染失败: code=%d", rec.Code)
+	}
+	if ct := rec.Header().Get("Content-Type"); ct != "image/png" {
+		t.Fatalf("差异瓦片应为 PNG，实际 %q", ct)
+	}
+	img, err := png.Decode(bytes.NewReader(rec.Body.Bytes()))
+	if err != nil {
+		t.Fatalf("解码差异瓦片失败: %v", err)
+	}
+	return img
+}
+
+// kindOf 按「哪个通道最亮」判类别，不去比对精确色值——PNG 解码回来的是
+// 预乘 alpha 的像素，硬比色值会被 alpha 换算绕进去。
+func kindOf(c [4]byte) string {
+	switch {
+	case c[3] == 0:
+		return "none"
+	case c[1] > c[0] && c[1] > c[2]:
+		return "gain"
+	case c[0] > c[1] && c[0] > c[2]:
+		return "lost"
+	}
+	return "both"
+}
+
+func pixAtImg(img image.Image, px, py int) [4]byte {
+	r, g, b, a := img.At(px, py).RGBA()
+	return [4]byte{byte(r >> 8), byte(g >> 8), byte(b >> 8), byte(a >> 8)}
+}
+
+// 令牌来自 URL，必须挡死路径穿越。
+func TestFogStashTokenRejectsTraversal(t *testing.T) {
+	s := &Server{cfg: &config.Config{DataDir: t.TempDir()}}
+	for _, bad := range []string{"", "..", "../../etc/passwd", strings.Repeat("a", 32) + "/../x", strings.ToUpper(strings.Repeat("a", 32))} {
+		if p, ok := s.fogStashPath(bad); ok {
+			t.Errorf("令牌 %q 不该通过校验，得到 %s", bad, p)
+		}
+	}
+	if _, ok := s.fogStashPath(strings.Repeat("0", 32)); !ok {
+		t.Error("32 位十六进制令牌应当通过")
+	}
+}
+
+func newFogBlock(gx, gy int, cells ...[2]int) fog.Block {
+	bm := make([]byte, 512)
+	for _, c := range cells {
+		bm[c[1]*8+c[0]/8] |= 0x80 >> (c[0] % 8)
+	}
+	return fog.Block{GX: gx, GY: gy, Bitmap: bm}
+}
+
+func fogUploadRequest(t *testing.T, data []byte) *http.Request {
+	t.Helper()
+	var buf bytes.Buffer
+	mw := multipart.NewWriter(&buf)
+	fw, err := mw.CreateFormFile("fwss", "Snapshot-test.fwss")
+	if err != nil {
+		t.Fatalf("构造上传表单失败: %v", err)
+	}
+	if _, err := fw.Write(data); err != nil {
+		t.Fatalf("写入上传内容失败: %v", err)
+	}
+	mw.Close()
+	req := httptest.NewRequest("POST", "/admin/fog/preview", &buf)
+	req.Header.Set("Content-Type", mw.FormDataContentType())
+	return req
+}

internal/web/fog_staging.go

@@ -0,0 +1,116 @@
+package web
+
+import (
+	"crypto/rand"
+	"encoding/hex"
+	"fmt"
+	"os"
+	"path/filepath"
+	"strings"
+	"time"
+)
+
+// 待确认的上传（迷雾快照、rond 备份）都先落到磁盘暂存，让站长看完差异再决定怎么导入；
+// 看完直接走人的靠 TTL 回收，不至于把几十 MB 的文件一直留在盘上。
+//
+// 令牌只认固定长度的十六进制串，这样即便来自 URL 也拼不出 ../ 之类的路径。
+
+const (
+	stashTokenLen = 32 // 16 字节的十六进制
+	stashTTL      = 2 * time.Hour
+)
+
+func stashPut(dir, ext string, data []byte) (string, error) {
+	if err := os.MkdirAll(dir, 0o700); err != nil {
+		return "", err
+	}
+	var raw [stashTokenLen / 2]byte
+	if _, err := rand.Read(raw[:]); err != nil {
+		return "", err
+	}
+	token := hex.EncodeToString(raw[:])
+	if err := os.WriteFile(filepath.Join(dir, token+ext), data, 0o600); err != nil {
+		return "", err
+	}
+	stashSweep(dir, ext)
+	return token, nil
+}
+
+func stashPath(dir, ext, token string) (string, bool) {
+	if len(token) != stashTokenLen {
+		return "", false
+	}
+	for i := 0; i < len(token); i++ {
+		c := token[i]
+		if (c < '0' || c > '9') && (c < 'a' || c > 'f') {
+			return "", false
+		}
+	}
+	return filepath.Join(dir, token+ext), true
+}
+
+func stashRead(dir, ext, token, what string) ([]byte, error) {
+	p, ok := stashPath(dir, ext, token)
+	if !ok {
+		return nil, fmt.Errorf("预览链接无效，请重新上传%s", what)
+	}
+	data, err := os.ReadFile(p)
+	if err != nil {
+		return nil, fmt.Errorf("这次预览已过期，请重新上传%s", what)
+	}
+	return data, nil
+}
+
+func stashDrop(dir, ext, token string) {
+	if p, ok := stashPath(dir, ext, token); ok {
+		os.Remove(p)
+	}
+}
+
+func stashSweep(dir, ext string) {
+	entries, err := os.ReadDir(dir)
+	if err != nil {
+		return
+	}
+	cutoff := time.Now().Add(-stashTTL)
+	for _, e := range entries {
+		if e.IsDir() || !strings.HasSuffix(e.Name(), ext) {
+			continue
+		}
+		if info, err := e.Info(); err == nil && info.ModTime().After(cutoff) {
+			continue
+		}
+		os.Remove(filepath.Join(dir, e.Name()))
+	}
+}
+
+// ---------- 迷雾快照 ----------
+
+// fogStashTokenLen 是迷雾预览令牌的长度，测试与调用方按它校验。
+const fogStashTokenLen = stashTokenLen
+
+const fogStashExt = ".fwss"
+
+func (s *Server) fogStashDir() string {
+	return filepath.Join(s.cfg.DataDir, "fog-staging")
+}
+
+func (s *Server) stashFog(data []byte) (string, error) {
+	return stashPut(s.fogStashDir(), fogStashExt, data)
+}
+
+func (s *Server) fogStashPath(token string) (string, bool) {
+	return stashPath(s.fogStashDir(), fogStashExt, token)
+}
+
+func (s *Server) loadStashedFog(token string) ([]byte, error) {
+	return stashRead(s.fogStashDir(), fogStashExt, token, "快照")
+}
+
+func (s *Server) dropStashedFog(token string) {
+	stashDrop(s.fogStashDir(), fogStashExt, token)
+}
+
+func (s *Server) sweepFogStash() {
+	stashSweep(s.fogStashDir(), fogStashExt)
+}

internal/web/geocode.go

@@ -351,6 +351,13 @@ func (s *Server) apiRegeo(w http.ResponseWriter, r *http.Request) {
 // 半径给 200 米：再大容易匹配到马路边上不相干的店；取不到就返回 ok=false，
 // 界面上只显示地址。
 func (s *Server) amapNearestPOI(ctx context.Context, lat, lon float64) (name string, dist float64, ok bool) {
+	name, _, dist, ok = s.amapAround(ctx, lat, lon)
+	return name, dist, ok
+}
+
+// amapAround 周边搜索：拿最近那个 POI 的名字、类型与距离。
+// typ 是高德的分类串（形如「餐饮服务;咖啡厅」），地点补全靠它猜活动与类别。
+func (s *Server) amapAround(ctx context.Context, lat, lon float64) (name, typ string, dist float64, ok bool) {
 	v := url.Values{}
 	v.Set("key", s.cfg.GeocodeKey)
 	v.Set("location", fmt.Sprintf("%.6f,%.6f", lon, lat))
@@ -359,20 +366,21 @@ func (s *Server) amapNearestPOI(ctx context.Context, lat, lon float64) (name str
 	v.Set("sortrule", "distance") // 按距离排序，第一条就是最近的
 	body, err := s.amapGet(ctx, aroundURL+"?"+v.Encode())
 	if err != nil {
-		return "", 0, false
+		return "", "", 0, false
 	}
 	var raw struct {
 		Status string `json:"status"`
 		Pois   []struct {
 			Name     string `json:"name"`
+			Type     string `json:"type"`
 			Distance string `json:"distance"`
 		} `json:"pois"`
 	}
 	if err := json.Unmarshal(body, &raw); err != nil || raw.Status != "1" || len(raw.Pois) == 0 {
-		return "", 0, false
+		return "", "", 0, false
 	}
 	d, _ := strconv.ParseFloat(raw.Pois[0].Distance, 64)
-	return raw.Pois[0].Name, d, true
+	return raw.Pois[0].Name, raw.Pois[0].Type, d, true
 }
 
 // amapRegeo 调一次高德的逆地理编码。失败返回 ok=false，调用方留空即可。

internal/web/handlers_admin.go

@@ -769,12 +769,12 @@ func (s *Server) notesPage(w http.ResponseWriter, r *http.Request) {
 	case "note":
 		order = "n.updated_at DESC NULLS LAST, p.name"
 	case "talk":
-		order = "(COALESCE((SELECT count(*) FROM place_visitor_votes vv WHERE vv.src_pk = p.src_pk),0)) DESC, p.visit_count DESC"
+		order = "(COALESCE((SELECT count(*) FROM place_visitor_votes vv WHERE vv.place_key = " + placeKeyExpr + "),0)) DESC, p.visit_count DESC"
 	}
 
 	base := `FROM places p
-		LEFT JOIN place_notes n ON n.src_pk = p.src_pk AND n.dataset_id = p.dataset_id
+		LEFT JOIN place_notes n ON n.place_key = ` + placeKeyExpr + `
-		LEFT JOIN place_votes v ON v.src_pk = p.src_pk AND v.dataset_id = p.dataset_id
+		LEFT JOIN place_votes v ON v.place_key = ` + placeKeyExpr + `
 		WHERE ` + strings.Join(where, " AND ")
 
 	var total int
@@ -790,8 +790,8 @@ func (s *Server) notesPage(w http.ResponseWriter, r *http.Request) {
 
 	limitArgs := append(append([]any{}, args...), notesPerPage, (d.PageNo-1)*notesPerPage)
 	q2 := `SELECT p.src_pk, COALESCE(n.alias,''), COALESCE(n.note,''), COALESCE(n.rond_note,''), COALESCE(v.verdict,0),
-		COALESCE((SELECT count(*) FROM place_visitor_votes vv WHERE vv.src_pk=p.src_pk AND vv.vote=1),0),
+		COALESCE((SELECT count(*) FROM place_visitor_votes vv WHERE vv.place_key = ` + placeKeyExpr + ` AND vv.vote=1),0),
-		COALESCE((SELECT count(*) FROM place_visitor_votes vv WHERE vv.src_pk=p.src_pk AND vv.vote=-1),0),
+		COALESCE((SELECT count(*) FROM place_visitor_votes vv WHERE vv.place_key = ` + placeKeyExpr + ` AND vv.vote=-1),0),
 		COALESCE(n.updated_at, to_timestamp(0)), p.id, COALESCE(p.name,''), COALESCE(p.city,''), COALESCE(p.visit_count,0)
 		` + base + ` ORDER BY ` + order + fmt.Sprintf(` LIMIT $%d OFFSET $%d`, len(args)+1, len(args)+2)
 

internal/web/handlers_edit.go

@@ -1742,6 +1742,7 @@ var (
 	activitySeq  = srcPKSeq{"activities", "src_pk", "Activity", "ZACTIVITY"}
 	weatherSeq   = srcPKSeq{"weather", "src_pk", "HourlyWeather", "ZHOURLYWEATHER"}
 	movementSeq  = srcPKSeq{"movements", "src_pk", "Movement", "ZMOVEMENT"}
+	tagSeq       = srcPKSeq{"tags", "src_pk", "Tag", "ZTAG"}
 	transportSeq = srcPKSeq{"movements", "transport_src", "Transport", "ZTRANSPORT"}
 )
 

internal/web/handlers_images.go

@@ -3,6 +3,7 @@ package web
 import (
 	"context"
 	"crypto/sha256"
+	"database/sql"
 	"encoding/hex"
 	"fmt"
 	"io"
@@ -26,6 +27,11 @@ const (
 	imageUploadMem = 8 << 20 // multipart 解析用的内存上限
 )
 
+// placeKeyExpr 把 places p 那一行的坐标换算成 place_key，图片、备注、结论共用这个键。
+// **必须与 rond.PlaceCoordKey 以及 notes/votes 包里的同款表达式逐位一致**：
+// fmt.Sprintf("%.6f|%.6f") ↔ to_char(x,'FM999990.000000')||'|'||to_char(y,'FM999990.000000')
+const placeKeyExpr = `to_char(p.lat,'FM999990.000000')||'|'||to_char(p.lon,'FM999990.000000')`
+
 // PlaceImage 是模板里用的地点图片。
 type PlaceImage struct {
 	ID     int64
@@ -57,14 +63,18 @@ func (s *Server) savePlaceImage(ctx context.Context, datasetID int64, srcPK int,
 	if err := s.media.Save(ctx, backend, key, data, "image/webp"); err != nil {
 		return 0, "", err
 	}
+	pkey, err := s.placeKeyOf(ctx, datasetID, srcPK)
+	if err != nil {
+		return 0, "", err
+	}
 	var id int64
 	if err := s.db.QueryRowContext(ctx, `INSERT INTO place_images
-		(dataset_id, src_pk, storage, object_key, width, height, bytes, position)
+		(dataset_id, src_pk, place_key, storage, object_key, width, height, bytes, position)
-		VALUES ($1,$2,$3,$4,$5,$6,$7,
+		VALUES ($1,$2,$3,$4,$5,$6,$7,$8,
-		        COALESCE((SELECT max(position)+1 FROM place_images WHERE dataset_id=$1 AND src_pk=$2), 0))
+		        COALESCE((SELECT max(position)+1 FROM place_images WHERE place_key=$3), 0))
 		ON CONFLICT (dataset_id, src_pk, object_key) DO UPDATE SET bytes=EXCLUDED.bytes
 		RETURNING id`,
-		datasetID, srcPK, backend, key, w, h, int64(len(data))).Scan(&id); err != nil {
+		datasetID, srcPK, pkey, backend, key, w, h, int64(len(data))).Scan(&id); err != nil {
 		return 0, "", err
 	}
 	return id, s.media.PublicURL(backend, key), nil
@@ -95,9 +105,15 @@ func (s *Server) adminPlaceImageUpload(w http.ResponseWriter, r *http.Request) {
 		return
 	}
 
+	pkey, err := s.placeKeyOf(ctx, ds.ID, src)
+	if err != nil {
+		s.serverError(w, r, err)
+		return
+	}
 	var count int
+	// 按坐标键数：换数据集后图片仍跟着同一个地点，配额也要跟着
 	if err := s.db.QueryRowContext(ctx, `SELECT count(*) FROM place_images
-		WHERE dataset_id=$1 AND src_pk=$2`, ds.ID, src).Scan(&count); err != nil {
+		WHERE place_key=$1`, pkey).Scan(&count); err != nil {
 		s.serverError(w, r, err)
 		return
 	}
@@ -196,10 +212,28 @@ func (s *Server) imageBackend(ctx context.Context) (string, error) {
 	return setting.MediaBackendLocal, nil
 }
 
+// placeKeyOf 把某个数据集里的地点编号换算成坐标键。
+// 换数据集之后仍靠它认出「还是同一个地点」，所以图片、备注、结论都挂在这上面。
+func (s *Server) placeKeyOf(ctx context.Context, datasetID int64, srcPK int) (string, error) {
+	var key string
+	err := s.db.QueryRowContext(ctx, `SELECT `+placeKeyExpr+` FROM places p
+		WHERE p.dataset_id=$1 AND p.src_pk=$2 AND p.lat IS NOT NULL AND p.lon IS NOT NULL`,
+		datasetID, srcPK).Scan(&key)
+	if err == sql.ErrNoRows {
+		return "", fmt.Errorf("地点不存在或没有坐标")
+	}
+	return key, err
+}
+
 // placeImagesOf 读某个地点的图片，按 position 排序。
+// 按坐标键查而不是 (dataset_id, src_pk)：换一份备份之后图片还跟着同一个地点。
 func (s *Server) placeImagesOf(ctx context.Context, datasetID int64, srcPK int) ([]PlaceImage, error) {
+	pkey, err := s.placeKeyOf(ctx, datasetID, srcPK)
+	if err != nil {
+		return nil, nil // 地点没有坐标就当作没有图
+	}
 	rows, err := s.db.QueryContext(ctx, `SELECT id, storage, object_key, width, height, bytes
-		FROM place_images WHERE dataset_id=$1 AND src_pk=$2 ORDER BY position, id`, datasetID, srcPK)
+		FROM place_images WHERE place_key=$1 ORDER BY position, id`, pkey)
 	if err != nil {
 		return nil, err
 	}

internal/web/handlers_public.go

@@ -183,7 +183,7 @@ func (s *Server) attachVotes(ctx context.Context, datasetID int64, places []stat
 	if err != nil {
 		return
 	}
-	tallies, err := s.votes.Tallies(ctx)
+	tallies, err := s.votes.Tallies(ctx, datasetID)
 	if err != nil {
 		return
 	}
@@ -539,8 +539,8 @@ func (s *Server) placePage(w http.ResponseWriter, r *http.Request) {
 		}
 	}
 	d.Verdict, _ = s.votes.Verdict(r.Context(), p.Dataset.ID, place.SrcPK)
-	d.Votes, _ = s.votes.Tally(r.Context(), place.SrcPK)
+	d.Votes, _ = s.votes.Tally(r.Context(), p.Dataset.ID, place.SrcPK)
-	d.MyVote = s.votes.Voter(r.Context(), place.SrcPK, s.voterKeyFromRequest(r))
+	d.MyVote = s.votes.Voter(r.Context(), p.Dataset.ID, place.SrcPK, s.voterKeyFromRequest(r))
 	// 图片：访客也要看得到，所以不分管理员
 	if imgs, err := s.placeImagesOf(r.Context(), p.Dataset.ID, place.SrcPK); err == nil {
 		d.Images = imgs

internal/web/handlers_vote.go

@@ -102,12 +102,12 @@ func (s *Server) apiVotes(w http.ResponseWriter, r *http.Request) {
 		s.json(w, map[string]string{"error": err.Error()})
 		return
 	}
-	tallies, err := s.votes.Tallies(ctx)
+	tallies, err := s.votes.Tallies(ctx, votesDatasetID)
 	if err != nil {
 		s.json(w, map[string]string{"error": err.Error()})
 		return
 	}
-	mine, err := s.votes.VoterAll(ctx, s.voterKeyFromRequest(r))
+	mine, err := s.votes.VoterAll(ctx, votesDatasetID, s.voterKeyFromRequest(r))
 	if err != nil {
 		s.json(w, map[string]string{"error": err.Error()})
 		return
@@ -145,10 +145,16 @@ func (s *Server) apiVerdict(w http.ResponseWriter, r *http.Request) {
 
 // apiVote 记录访客对某地点的点赞 / 点踩，返回最新票数与该访客的选择。
 func (s *Server) apiVote(w http.ResponseWriter, r *http.Request) {
+	ctx := r.Context()
 	if err := r.ParseForm(); err != nil {
 		s.json(w, map[string]string{"error": "请求解析失败"})
 		return
 	}
+	ds, err := s.datasetFor(ctx)
+	if err != nil || ds == nil {
+		s.json(w, map[string]string{"error": "还没有可投票的数据集"})
+		return
+	}
 	srcPK, err := strconv.Atoi(r.PostFormValue("src_pk"))
 	vote, _ := strconv.Atoi(r.PostFormValue("vote"))
 	if err != nil || (vote != 1 && vote != -1) {
@@ -160,7 +166,7 @@ func (s *Server) apiVote(w http.ResponseWriter, r *http.Request) {
 		s.json(w, map[string]string{"error": "无法识别访客"})
 		return
 	}
-	t, mine, err := s.votes.Cast(r.Context(), srcPK, key, vote)
+	t, mine, err := s.votes.Cast(ctx, ds.ID, srcPK, key, vote)
 	if err != nil {
 		s.json(w, map[string]string{"error": err.Error()})
 		return
@@ -170,11 +176,17 @@ func (s *Server) apiVote(w http.ResponseWriter, r *http.Request) {
 
 // voteTotals 汇总站长结论数量与访客票数，供统计页展示。
 func (s *Server) voteTotals(ctx context.Context, datasetID int64) (rec, avoid, up, down int, err error) {
+	// 两张票表都挂坐标键，统计要按「本数据集的地点」圈定范围，
+	// 不能再按它们自己的 dataset_id 过滤——那个只是最后写入时留下的线索。
 	err = s.db.QueryRowContext(ctx, `SELECT
-		(SELECT count(*) FROM place_votes WHERE dataset_id=$1 AND verdict=1),
+		(SELECT count(*) FROM place_votes v JOIN places p ON v.place_key = `+placeKeyExpr+`
-		(SELECT count(*) FROM place_votes WHERE dataset_id=$1 AND verdict=-1),
+			WHERE p.dataset_id=$1 AND v.verdict=1),
-		(SELECT count(*) FROM place_visitor_votes WHERE vote=1),
+		(SELECT count(*) FROM place_votes v JOIN places p ON v.place_key = `+placeKeyExpr+`
-		(SELECT count(*) FROM place_visitor_votes WHERE vote=-1)`, datasetID).
+			WHERE p.dataset_id=$1 AND v.verdict=-1),
+		(SELECT count(*) FROM place_visitor_votes vv JOIN places p ON vv.place_key = `+placeKeyExpr+`
+			WHERE p.dataset_id=$1 AND vv.vote=1),
+		(SELECT count(*) FROM place_visitor_votes vv JOIN places p ON vv.place_key = `+placeKeyExpr+`
+			WHERE p.dataset_id=$1 AND vv.vote=-1)`, datasetID).
 		Scan(&rec, &avoid, &up, &down)
 	return
 }
@@ -183,7 +195,7 @@ func (s *Server) voteTotals(ctx context.Context, datasetID int64) (rec, avoid, u
 func (s *Server) verdictPlaces(ctx context.Context, datasetID int64, verdict, limit int) ([]stats.Place, error) {
 	q := `SELECT ` + stats.PlaceCols + ` FROM places p
 		WHERE p.dataset_id=$1 AND EXISTS (SELECT 1 FROM place_votes pv
-			WHERE pv.src_pk=p.src_pk AND pv.dataset_id=p.dataset_id AND pv.verdict=$2)
+			WHERE pv.place_key = ` + placeKeyExpr + ` AND pv.verdict=$2)
 		ORDER BY p.visit_count DESC LIMIT ` + strconv.Itoa(limit)
 	rows, err := s.db.QueryContext(ctx, q, datasetID, verdict)
 	if err != nil {

internal/web/place_identity_test.go

@@ -0,0 +1,149 @@
+package web
+
+import (
+	"fmt"
+	"testing"
+	"time"
+
+	"rond-with-you/internal/votes"
+)
+
+// testPlace 在两个数据集里各建一个**同坐标**的地点，返回它们的编号与第二个数据集。
+//
+// 坐标是随手挑的专属值：备注按坐标共享，而读取按设计不按 user_id 过滤（单站长站点），
+// 借用真实数据里的坐标会把别的测试残留的记录串进来。
+func testPlace(t *testing.T, f *movementFixture, uid int64, lat, lon float64) (pkA, pkB int, dsB int64) {
+	t.Helper()
+	const pkAVal, pkBVal = 660001, 660002
+	if _, err := f.pg.ExecContext(f.ctx, `INSERT INTO places (dataset_id, src_pk, name, lat, lon)
+		VALUES ($1,$2,'甲侧地点',$3,$4)`, f.dsID, pkAVal, lat, lon); err != nil {
+		t.Fatalf("建地点失败: %v", err)
+	}
+	sha := fmt.Sprintf("%064d", time.Now().UnixNano())
+	if err := f.pg.QueryRowContext(f.ctx, `INSERT INTO datasets (user_id, original_name, sha256, status, is_active)
+		VALUES ($1,'另一个数据集',$2,'done',false) RETURNING id`, uid, sha).Scan(&dsB); err != nil {
+		t.Fatalf("建数据集失败: %v", err)
+	}
+	if _, err := f.pg.ExecContext(f.ctx, `INSERT INTO places (dataset_id, src_pk, name, lat, lon)
+		VALUES ($1,$2,'乙侧地点',$3,$4)`, dsB, pkBVal, lat, lon); err != nil {
+		t.Fatalf("建地点失败: %v", err)
+	}
+	key := fmt.Sprintf("%.6f|%.6f", lat, lon)
+	t.Cleanup(func() {
+		f.pg.ExecContext(f.ctx, `DELETE FROM place_notes WHERE place_key=$1`, key)
+		f.pg.ExecContext(f.ctx, `DELETE FROM place_votes WHERE place_key=$1`, key)
+		f.pg.ExecContext(f.ctx, `DELETE FROM place_visitor_votes WHERE place_key=$1`, key)
+		f.pg.ExecContext(f.ctx, `DELETE FROM datasets WHERE id=$1`, dsB)
+	})
+	return pkAVal, pkBVal, dsB
+}
+
+// 访客票也一样：它是站点自己的数据（rondbackup 里没有这一项），
+// 但同样要认得出「是哪个地点」，所以也挂坐标键。
+func TestVisitorVotesFollowPlaceAcrossDatasets(t *testing.T) {
+	f := newMovementFixture(t)
+	uid := userFrom(f.ctx).ID
+	pkA, pkB, dsB := testPlace(t, f, uid, 77.777777, 88.888888)
+
+	if _, mine, err := f.srv.votes.Cast(f.ctx, f.dsID, pkA, "visitor-a", 1); err != nil || mine != 1 {
+		t.Fatalf("投票失败: mine=%d err=%v", mine, err)
+	}
+
+	tally, err := f.srv.votes.Tally(f.ctx, dsB, pkB)
+	if err != nil {
+		t.Fatalf("读票数失败: %v", err)
+	}
+	if tally.Up != 1 || tally.Down != 0 {
+		t.Fatalf("换数据集后票数应照旧，实际 %+v", tally)
+	}
+	if v := f.srv.votes.Voter(f.ctx, dsB, pkB, "visitor-a"); v != 1 {
+		t.Fatalf("「我投的」也该认得出来，实际 %d", v)
+	}
+	// 再点一次是撤销：从哪一侧点都该撤掉同一张票
+	if _, mine, err := f.srv.votes.Cast(f.ctx, dsB, pkB, "visitor-a", 1); err != nil || mine != 0 {
+		t.Fatalf("再点一次应撤销: mine=%d err=%v", mine, err)
+	}
+	if tally, err := f.srv.votes.Tally(f.ctx, f.dsID, pkA); err != nil || tally.Up != 0 {
+		t.Fatalf("撤销后另一边也该归零: %+v err=%v", tally, err)
+	}
+}
+
+// 备注、结论、图片挂的是坐标键，所以**换数据集之后仍然跟着同一个地点**——
+// 这正是这次迁移要解决的问题。老结构挂 (dataset_id, src_pk)，
+// 换一份备份同编号就是另一个地点，内容全部失联。
+func TestNotesAndVerdictsFollowPlaceAcrossDatasets(t *testing.T) {
+	f := newMovementFixture(t)
+	uid := userFrom(f.ctx).ID
+	pkA, pkB, dsB := testPlace(t, f, uid, 11.111111, 22.222222)
+
+	if err := f.srv.notes.Save(f.ctx, uid, f.dsID, pkA, "别名甲", "备注甲"); err != nil {
+		t.Fatalf("写备注失败: %v", err)
+	}
+	if err := f.srv.votes.SaveVerdict(f.ctx, uid, f.dsID, pkA, votes.VerdictRecommend); err != nil {
+		t.Fatalf("写结论失败: %v", err)
+	}
+
+	// 从「另一个数据集」读：编号完全不同，但坐标一致，应当照样读得到
+	all, err := f.srv.notes.All(f.ctx, dsB)
+	if err != nil {
+		t.Fatalf("读备注失败: %v", err)
+	}
+	got, ok := all[pkB]
+	if !ok {
+		t.Fatal("换数据集后应当仍能读到这个地点的备注")
+	}
+	if got.Alias != "别名甲" || got.Content != "备注甲" {
+		t.Fatalf("备注应原样跟过来，实际 alias=%q note=%q", got.Alias, got.Content)
+	}
+
+	v, err := f.srv.votes.Verdict(f.ctx, dsB, pkB)
+	if err != nil {
+		t.Fatalf("读结论失败: %v", err)
+	}
+	if v != votes.VerdictRecommend {
+		t.Fatalf("结论应跟过来，实际 %d", v)
+	}
+}
+
+// 两个数据集里的编号完全不同，但备注与结论是同一份——改一处两边都变。
+func TestNotesUpdateVisibleFromOtherDataset(t *testing.T) {
+	f := newMovementFixture(t)
+	uid := userFrom(f.ctx).ID
+	pkA, pkB, dsB := testPlace(t, f, uid, 33.333333, 44.444444)
+
+	if err := f.srv.notes.Save(f.ctx, uid, dsB, pkB, "别名乙", "备注乙"); err != nil {
+		t.Fatalf("在新数据集写备注失败: %v", err)
+	}
+	back, err := f.srv.notes.All(f.ctx, f.dsID)
+	if err != nil {
+		t.Fatalf("回读失败: %v", err)
+	}
+	if back[pkA].Content != "备注乙" {
+		t.Fatalf("备注是同一份数据，改一处两边都该变，实际 %q", back[pkA].Content)
+	}
+}
+
+// 坐标不同的地点绝不能互相认领——键是坐标，不是「大概位置」。
+func TestNotesDoNotLeakBetweenDifferentPlaces(t *testing.T) {
+	f := newMovementFixture(t)
+	uid := userFrom(f.ctx).ID
+	pkA, _, dsB := testPlace(t, f, uid, 55.555555, 66.666666)
+
+	if err := f.srv.notes.Save(f.ctx, uid, f.dsID, pkA, "别名甲", "备注甲"); err != nil {
+		t.Fatalf("写备注失败: %v", err)
+	}
+	// 在乙数据集里放一个坐标差 0.001 度（约 100m）的地点，是完全不同的地方
+	const otherPK = 660003
+	if _, err := f.pg.ExecContext(f.ctx, `INSERT INTO places (dataset_id, src_pk, name, lat, lon)
+		VALUES ($1,$2,'隔壁那家', 55.556555, 66.666666)`, dsB, otherPK); err != nil {
+		t.Fatalf("建地点失败: %v", err)
+	}
+
+	all, err := f.srv.notes.All(f.ctx, dsB)
+	if err != nil {
+		t.Fatalf("读备注失败: %v", err)
+	}
+	if _, ok := all[otherPK]; ok {
+		t.Fatal("坐标不同的地点不该认领到别人的备注")
+	}
+}

internal/web/place_image_test.go

@@ -317,14 +317,16 @@ func TestVisitorPlacePageCarriesImageURLs(t *testing.T) {
 	var placeID int64
 	var srcPK int
 	if err := f.pg.QueryRowContext(f.ctx, `SELECT id, src_pk FROM places
-		WHERE dataset_id=$1 ORDER BY id LIMIT 1`, f.dsID).Scan(&placeID, &srcPK); err != nil {
+		WHERE dataset_id=$1 AND lat IS NOT NULL ORDER BY id LIMIT 1`, f.dsID).Scan(&placeID, &srcPK); err != nil {
 		t.Fatalf("找不到地点: %v", err)
 	}
 	const key = "9/visitor-page-test.webp"
-	// 这里只验发下去的地址，不验能否取回字节，所以不用真的写文件
+	// 这里只验发下去的地址，不验能否取回字节，所以不用真的写文件。
+	// place_key 得照真实写入路径一并算好——读取是认坐标键的，不认 (dataset_id, src_pk)。
 	if _, err := f.pg.ExecContext(f.ctx, `INSERT INTO place_images
-		(dataset_id, src_pk, storage, object_key, width, height, bytes, position)
+		(dataset_id, src_pk, place_key, storage, object_key, width, height, bytes, position)
-		VALUES ($1,$2,'local',$3,1200,900,1024,0)
+		SELECT $1, $2, `+placeKeyExpr+`, 'local', $3, 1200, 900, 1024, 0
+		FROM places p WHERE p.dataset_id=$1 AND p.src_pk=$2
 		ON CONFLICT (dataset_id, src_pk, object_key) DO NOTHING`,
 		f.dsID, srcPK, key); err != nil {
 		t.Fatalf("插入图片记录失败: %v", err)

internal/web/server.go

@@ -54,6 +54,9 @@ var pageFiles = map[string]struct {
 	"admin/twofa-login":    {[]string{"templates/admin/twofa-login.html"}, "login2"},
 	"admin/twofa":          {[]string{"templates/layout.html", "templates/admin/twofa.html"}, "layout"},
 	"admin/fog-mask":       {[]string{"templates/layout.html", "templates/admin/fog-mask.html"}, "layout"},
+	"admin/fog-preview":    {[]string{"templates/layout.html", "templates/admin/fog-preview.html"}, "layout"},
+	"admin/backup-preview": {[]string{"templates/layout.html", "templates/admin/backup-preview.html"}, "layout"},
+	"admin/fillup":         {[]string{"templates/layout.html", "templates/admin/fillup.html"}, "layout"},
 	"admin/notes":          {[]string{"templates/layout.html", "templates/admin/notes.html"}, "layout"},
 	"admin/edit":           {[]string{"templates/layout.html", "templates/admin/edit.html"}, "layout"},
 	"admin/topics":         {[]string{"templates/layout.html", "templates/admin/topics.html"}, "layout"},
@@ -229,6 +232,9 @@ func (s *Server) routes() {
 	s.mux.HandleFunc("POST /admin/twofa/disable", s.requireAdmin(s.twofaDisable))
 	s.mux.HandleFunc("GET /admin", s.requireAdmin(s.adminHome))
 	s.mux.HandleFunc("POST /admin/upload", s.requireAdmin(s.adminUpload))
+	s.mux.HandleFunc("POST /admin/preview", s.requireAdmin(s.adminBackupPreview))
+	s.mux.HandleFunc("GET /admin/preview/{token}", s.requireAdmin(s.adminBackupPreviewPage))
+	s.mux.HandleFunc("POST /admin/preview/{token}/merge", s.requireAdmin(s.adminBackupMerge))
 	s.mux.HandleFunc("POST /admin/datasets/{id}/activate", s.requireAdmin(s.adminActivate))
 	s.mux.HandleFunc("POST /admin/datasets/{id}/delete", s.requireAdmin(s.adminDelete))
 	s.mux.HandleFunc("POST /admin/place/note", s.requireAdmin(s.adminPlaceNote))
@@ -261,6 +267,9 @@ func (s *Server) routes() {
 	s.mux.HandleFunc("POST /admin/edit/weather", s.requireAdmin(s.editWeatherCreate))
 	s.mux.HandleFunc("POST /admin/gpx", s.requireAdmin(s.adminGpxUpload))
 	s.mux.HandleFunc("POST /admin/gpx/delete", s.requireAdmin(s.adminGpxDelete))
+	s.mux.HandleFunc("POST /admin/fog/preview", s.requireAdmin(s.adminFogPreview))
+	s.mux.HandleFunc("GET /admin/fog/preview/{token}", s.requireAdmin(s.adminFogPreviewPage))
+	s.mux.HandleFunc("GET /admin/fog/preview/{token}/{z}/{x}/{y}", s.requireAdmin(s.adminFogDiffTile))
 	s.mux.HandleFunc("POST /admin/fog", s.requireAdmin(s.adminFogUpload))
 	s.mux.HandleFunc("POST /admin/fog/clear", s.requireAdmin(s.adminFogClear))
 	s.mux.HandleFunc("GET /admin/fog/export", s.requireAdmin(s.adminFogExport))
@@ -271,6 +280,9 @@ func (s *Server) routes() {
 	s.mux.HandleFunc("GET /admin/export/places.geojson", s.requireAdmin(s.exportGeoJSON))
 	s.mux.HandleFunc("GET /admin/export/places.gpx", s.requireAdmin(s.exportGPX))
 	s.mux.HandleFunc("GET /admin/export/rondbackup", s.requireAdmin(s.exportRondbackup))
+	s.mux.HandleFunc("GET /admin/fillup", s.requireAdmin(s.adminFillupPage))
+	s.mux.HandleFunc("POST /admin/fillup/apply", s.requireAdmin(s.adminFillupApply))
+	s.mux.HandleFunc("POST /admin/fillup/amap", s.requireAdmin(s.adminFillupAmap))
 	s.mux.HandleFunc("GET /admin/settings", s.requireAdmin(s.settingsPage))
 	s.mux.HandleFunc("POST /admin/settings", s.requireAdmin(s.settingsSubmit))
 	s.mux.HandleFunc("GET /admin/password", s.requireAdmin(s.passwordPage))

internal/web/templates/admin/backup-preview.html

@@ -0,0 +1,310 @@
+{{define "content"}}
+<div class="wrap">
+  <div class="page-head">
+    <div>
+      <h1>备份差异预览</h1>
+      <div class="sub">
+        这份备份与当前展示的「{{.DatasetName}}」逐条比对的结果。<strong>还没有导入</strong>，站内数据一个字节都没动。
+      </div>
+    </div>
+    <div class="row"><a class="btn" href="/admin">← 返回后台</a></div>
+  </div>
+
+  {{if .Identical}}
+  <div class="card">
+    <div class="alert ok">这份备份与当前数据集<strong>完全一致</strong>：没有新增、没有被删、也没有冲突。</div>
+  </div>
+  {{end}}
+
+  {{if .Truncated}}
+  <div class="card"><div class="alert err">差异较多，下面每类只列出前 200 条，确切数量看概览表。</div></div>
+  {{end}}
+
+  <div class="card">
+    <h2>概览</h2>
+    <div class="tw">
+      <table class="tb tb-stack">
+        <thead>
+          <tr>
+            <th>实体</th><th class="num">备份</th><th class="num">站内</th>
+            <th class="num">备份新增</th><th class="num">仅站内有</th><th class="num">冲突</th><th class="num">一致</th>
+          </tr>
+        </thead>
+        <tbody>
+          <tr>
+            <td>到访</td>
+            <td class="num" data-label="备份">{{num .BackupVisits}}</td>
+            <td class="num" data-label="站内">{{num .StoredVisits}}</td>
+            <td class="num" data-label="备份新增">{{num .VisitCounts.Added}}</td>
+            <td class="num" data-label="仅站内有">{{num .VisitCounts.Removed}}</td>
+            <td class="num" data-label="冲突">{{num .VisitCounts.Changed}}</td>
+            <td class="num" data-label="一致">{{num .VisitCounts.Same}}</td>
+          </tr>
+          <tr>
+            <td>地点</td>
+            <td class="num" data-label="备份">{{num .BackupPlaces}}</td>
+            <td class="num" data-label="站内">{{num .StoredPlaces}}</td>
+            <td class="num" data-label="备份新增">{{num .PlaceCounts.Added}}</td>
+            <td class="num" data-label="仅站内有">{{num .PlaceCounts.Removed}}</td>
+            <td class="num" data-label="冲突">{{num .PlaceCounts.Changed}}</td>
+            <td class="num" data-label="一致">{{num .PlaceCounts.Same}}</td>
+          </tr>
+          <tr>
+            <td>活动类型</td>
+            <td class="num" data-label="备份">{{num .BackupActs}}</td>
+            <td class="num" data-label="站内">{{num .StoredActs}}</td>
+            <td class="num" data-label="备份新增">{{num .ActCounts.Added}}</td>
+            <td class="num" data-label="仅站内有">{{num .ActCounts.Removed}}</td>
+            <td class="num" data-label="冲突">{{num .ActCounts.Changed}}</td>
+            <td class="num" data-label="一致">{{num .ActCounts.Same}}</td>
+          </tr>
+        </tbody>
+      </table>
+    </div>
+    <div class="card-sub" style="margin-top:10px">
+      对齐按每条记录的 <strong>UUID</strong> 做：rond 每次导出都会重排记录编号（同样的 822 条到访，两次导出的编号 100% 不同，UUID 却逐条一模一样），
+      所以只有 UUID 认得出来是同一条；地点没有 UUID，退到「名称 + 坐标」。
+      站内补录的记录不会出现在真机备份里，一律归到「仅站内有」。
+    </div>
+  </div>
+
+  <div class="card">
+    <h2>到访</h2>
+
+    <div class="card-sub"><strong>备份里多出来的（{{num .VisitCounts.Added}}）</strong> —— 目前站内没有这些记录</div>
+    {{if .VisitAdded}}
+    <div class="tw">
+      <table class="tb tb-stack">
+        <thead><tr><th>到达</th><th>离开</th><th>地点</th><th>活动</th><th>备注</th></tr></thead>
+        <tbody>
+          {{range .VisitAdded}}
+          <tr>
+            <td class="mono">{{dtt .Arrival}}</td>
+            <td class="mono" data-label="离开">{{dtt .Departure}}</td>
+            <td data-label="地点">{{if .Place}}{{.Place}}{{else}}<span class="muted">—</span>{{end}}</td>
+            <td data-label="活动">{{if .Activity}}{{.Activity}}{{else}}<span class="muted">—</span>{{end}}</td>
+            <td data-label="备注">{{if .Remark}}{{.Remark}}{{else}}<span class="muted">—</span>{{end}}</td>
+          </tr>
+          {{end}}
+        </tbody>
+      </table>
+    </div>
+    {{else}}<div class="muted" style="margin-bottom:14px">没有</div>{{end}}
+
+    <div class="card-sub" style="margin-top:16px">
+      <strong>只在站内有（{{num .VisitCounts.Removed}}）</strong> —— 备份里找不到；可能是你在这里补录的，也可能是实机上删掉的。
+      <strong>默认一条都不删</strong>；确实想清掉的，勾上左列的「合并时删除」。
+    </div>
+    {{if .VisitGone}}
+    <div class="tw">
+      <table class="tb tb-stack">
+        <thead><tr><th>到达</th><th>离开</th><th>地点</th><th>活动</th><th>备注</th><th>来源</th><th>合并时删除</th></tr></thead>
+        <tbody>
+          {{range .VisitGone}}
+          <tr>
+            <td class="mono">{{dtt .Arrival}}</td>
+            <td class="mono" data-label="离开">{{dtt .Departure}}</td>
+            <td data-label="地点">{{if .Place}}{{.Place}}{{else}}<span class="muted">—</span>{{end}}</td>
+            <td data-label="活动">{{if .Activity}}{{.Activity}}{{else}}<span class="muted">—</span>{{end}}</td>
+            <td data-label="备注">{{if .Remark}}{{.Remark}}{{else}}<span class="muted">—</span>{{end}}</td>
+            <td data-label="来源">{{if .UserAdded}}<span>站内补录</span>{{else}}<span class="muted">备份里已无</span>{{end}}</td>
+            <td data-label="合并时删除">
+              <input type="checkbox" form="merge-form" name="dv_{{.SrcPK}}" value="1" title="勾上＝合并时删掉这条到访">
+            </td>
+          </tr>
+          {{end}}
+        </tbody>
+      </table>
+    </div>
+    {{else}}<div class="muted" style="margin-bottom:14px">没有</div>{{end}}
+
+    <div class="card-sub" style="margin-top:16px"><strong>两边都有但不一样（{{num .VisitCounts.Changed}}）</strong> —— 左边是站内当前的值，右边是备份里的值</div>
+    {{if .VisitClash}}
+    <div class="tw">
+      <table class="tb tb-stack">
+        <thead><tr><th>到达</th><th>地点</th><th>活动</th><th>差异</th><th>合并时</th></tr></thead>
+        <tbody>
+          {{range .VisitClash}}
+          <tr>
+            <td class="mono">{{dtt .Arrival}}</td>
+            <td data-label="地点">{{if .Place}}{{.Place}}{{else}}<span class="muted">—</span>{{end}}</td>
+            <td data-label="活动">{{if .Activity}}{{.Activity}}{{else}}<span class="muted">—</span>{{end}}</td>
+            <td data-label="差异">
+              {{range .Fields}}
+              <div style="font-size:12.5px;line-height:1.7">
+                <span class="muted">{{.Label}}</span>
+                <span style="text-decoration:line-through;opacity:.65">{{if .From}}{{.From}}{{else}}（空）{{end}}</span>
+                <span style="opacity:.5">→</span>
+                <strong>{{if .To}}{{.To}}{{else}}（空）{{end}}</strong>
+              </div>
+              {{end}}
+            </td>
+            <td data-label="合并时" style="white-space:nowrap">
+              <label style="margin-right:8px"><input type="radio" form="merge-form" name="vc_{{.Key}}" value="backup" checked> 用实机</label>
+              <label style="margin-right:8px"><input type="radio" form="merge-form" name="vc_{{.Key}}" value="db"> 用站内</label>
+              <label><input type="radio" form="merge-form" name="vc_{{.Key}}" value="skip"> 跳过</label>
+            </td>
+          </tr>
+          {{end}}
+        </tbody>
+      </table>
+    </div>
+    {{else}}<div class="muted">没有</div>{{end}}
+  </div>
+
+  <div class="card">
+    <h2>地点</h2>
+    <div class="card-sub"><strong>备份里多出来的（{{num .PlaceCounts.Added}}）</strong></div>
+    {{if .PlaceAdded}}
+    <div class="tw">
+      <table class="tb tb-stack">
+        <thead><tr><th>名称</th><th>省 / 市</th><th>分类</th><th class="num">坐标</th></tr></thead>
+        <tbody>
+          {{range .PlaceAdded}}
+          <tr>
+            <td>{{if .Name}}{{.Name}}{{else}}<span class="muted">（未命名）</span>{{end}}</td>
+            <td data-label="省 / 市">{{.Province}} {{.City}}</td>
+            <td data-label="分类">{{if .POICategory}}{{.POICategory}}{{else}}<span class="muted">—</span>{{end}}</td>
+            <td class="num mono" data-label="坐标">{{printf "%.5f" .Lat}}, {{printf "%.5f" .Lon}}</td>
+          </tr>
+          {{end}}
+        </tbody>
+      </table>
+    </div>
+    {{else}}<div class="muted" style="margin-bottom:14px">没有</div>{{end}}
+
+    <div class="card-sub" style="margin-top:16px">
+      <strong>只在站内有（{{num .PlaceCounts.Removed}}）</strong>
+      —— 名下还有到访的地点删不掉（会连带删掉那些到访），会直接报错让你先处理。
+    </div>
+    {{if .PlaceGone}}
+    <div class="tw">
+      <table class="tb tb-stack">
+        <thead><tr><th>名称</th><th>省 / 市</th><th class="num">到访</th><th class="num">坐标</th><th>合并时删除</th></tr></thead>
+        <tbody>
+          {{range .PlaceGone}}
+          <tr>
+            <td>{{if .Name}}{{.Name}}{{else}}<span class="muted">（未命名）</span>{{end}}</td>
+            <td data-label="省 / 市">{{.Province}} {{.City}}</td>
+            <td class="num" data-label="到访">{{num .VisitCount}}</td>
+            <td class="num mono" data-label="坐标">{{printf "%.5f" .Lat}}, {{printf "%.5f" .Lon}}</td>
+            <td data-label="合并时删除">
+              {{if gt .VisitCount 0}}
+                <span class="muted" style="font-size:12.5px">还有到访，不能删</span>
+              {{else}}
+                <input type="checkbox" form="merge-form" name="dp_{{.SrcPK}}" value="1">
+              {{end}}
+            </td>
+          </tr>
+          {{end}}
+        </tbody>
+      </table>
+    </div>
+    {{else}}<div class="muted" style="margin-bottom:14px">没有</div>{{end}}
+
+    <div class="card-sub" style="margin-top:16px"><strong>两边都有但地址不一样（{{num .PlaceCounts.Changed}}）</strong></div>
+    {{if .PlaceClash}}
+    <div class="tw">
+      <table class="tb tb-stack">
+        <thead><tr><th>名称</th><th>差异</th><th>合并时</th></tr></thead>
+        <tbody>
+          {{range .PlaceClash}}
+          <tr>
+            <td>{{if .DB.Name}}{{.DB.Name}}{{else}}<span class="muted">（未命名）</span>{{end}}</td>
+            <td data-label="差异">
+              {{range .Fields}}
+              <div style="font-size:12.5px;line-height:1.7">
+                <span class="muted">{{.Label}}</span>
+                <span style="text-decoration:line-through;opacity:.65">{{if .From}}{{.From}}{{else}}（空）{{end}}</span>
+                <span style="opacity:.5">→</span>
+                <strong>{{if .To}}{{.To}}{{else}}（空）{{end}}</strong>
+              </div>
+              {{end}}
+            </td>
+            <td data-label="合并时" style="white-space:nowrap">
+              <label style="margin-right:8px"><input type="radio" form="merge-form" name="pc_{{.DB.Key}}" value="backup" checked> 用实机</label>
+              <label style="margin-right:8px"><input type="radio" form="merge-form" name="pc_{{.DB.Key}}" value="db"> 用站内</label>
+              <label><input type="radio" form="merge-form" name="pc_{{.DB.Key}}" value="skip"> 跳过</label>
+            </td>
+          </tr>
+          {{end}}
+        </tbody>
+      </table>
+    </div>
+    {{else}}<div class="muted">没有</div>{{end}}
+  </div>
+
+  <div class="card">
+    <h2>活动类型</h2>
+    <div class="card-sub">
+      新增 {{num .ActCounts.Added}} · 仅站内有 {{num .ActCounts.Removed}} · 冲突 {{num .ActCounts.Changed}} · 一致 {{num .ActCounts.Same}}
+    </div>
+    <div class="row" style="gap:24px;align-items:flex-start;flex-wrap:wrap">
+      <div style="flex:1 1 220px">
+        <div class="muted" style="font-size:12.5px;margin-bottom:4px">备份新增</div>
+        {{range .ActAdded}}<div>{{.Name}}</div>{{else}}<div class="muted">没有</div>{{end}}
+      </div>
+      <div style="flex:1 1 220px">
+        <div class="muted" style="font-size:12.5px;margin-bottom:4px">仅站内有（勾上＝合并时删除）</div>
+        {{range .ActGone}}
+          <label style="display:block"><input type="checkbox" form="merge-form" name="da_{{.SrcPK}}" value="1"> {{.Name}}</label>
+        {{else}}<div class="muted">没有</div>{{end}}
+      </div>
+      <div style="flex:1 1 260px">
+        <div class="muted" style="font-size:12.5px;margin-bottom:4px">名称不同</div>
+        {{range .ActClash}}
+          <div style="margin-bottom:6px">
+            {{range .Fields}}<div><span style="text-decoration:line-through;opacity:.65">{{.From}}</span> → <strong>{{.To}}</strong></div>{{end}}
+            <div style="margin-top:4px">
+              <label style="margin-right:8px"><input type="radio" form="merge-form" name="ac_{{actKey .DB}}" value="backup" checked> 用实机</label>
+              <label style="margin-right:8px"><input type="radio" form="merge-form" name="ac_{{actKey .DB}}" value="db"> 用站内</label>
+              <label><input type="radio" form="merge-form" name="ac_{{actKey .DB}}" value="skip"> 跳过</label>
+            </div>
+          </div>
+        {{else}}<div class="muted">没有</div>{{end}}
+      </div>
+    </div>
+  </div>
+
+  <div class="card">
+    <h2>其它实体（只列数量）</h2>
+    <div class="tw">
+      <table class="tb tb-stack">
+        <thead><tr><th>实体</th><th class="num">备份</th><th class="num">站内</th></tr></thead>
+        <tbody>
+          <tr><td>位移</td><td class="num" data-label="备份">{{num .BackupMovements}}</td><td class="num" data-label="站内">{{num .StoredMovements}}</td></tr>
+          <tr><td>小时天气</td><td class="num" data-label="备份">{{num .BackupWeather}}</td><td class="num" data-label="站内">{{num .StoredWeather}}</td></tr>
+          <tr><td>原始定位点</td><td class="num" data-label="备份">{{num .BackupRaw}}</td><td class="num" data-label="站内"><span class="muted">不单独落库</span></td></tr>
+        </tbody>
+      </table>
+    </div>
+    <div class="card-sub" style="margin-top:10px">
+      位移跟着它的起止到访走、天气跟着到访走，所以这两项按到访对齐结果一并处理，不单独做逐条比对。
+    </div>
+  </div>
+
+  <div class="card">
+    <h2>执行合并</h2>
+    <div class="card-sub">
+      把选中的改动写进当前数据集「{{.DatasetName}}」。整个过程跑在一个事务里，任何一步失败都会<strong>整体回滚</strong>，数据不会半改。
+      <br>「仅站内有」的记录<strong>默认一条都不删</strong>；确实要清掉的，在上面各表里逐条勾「合并时删除」。
+      名下有到访的地点会被拒绝删除（否则会连带删掉那些到访），先处理到访再来。
+    </div>
+    <form id="merge-form" method="post" action="/admin/preview/{{.Token}}/merge"></form>
+    <label style="display:flex;align-items:flex-start;gap:8px;margin:4px 0 12px">
+      <input type="checkbox" form="merge-form" name="add_new" value="1" checked style="margin-top:3px">
+      <span>把备份里多出来的
+        <strong>{{num .VisitCounts.Added}}</strong> 条到访、
+        <strong>{{num .PlaceCounts.Added}}</strong> 个地点、
+        <strong>{{num .ActCounts.Added}}</strong> 个活动并进来
+        <span class="muted">（新到访会连它的地点、活动、标签、位移与天气一起带过来）</span>
+      </span>
+    </label>
+    <button class="btn primary" form="merge-form" type="submit"
+            onclick="return confirm('确认把选中的改动写进当前数据集？出错会自动整体回滚。')">执行合并</button>
+    <div class="card-sub" style="margin:10px 0 0">
+      合并后再传一次同一份备份，差异应当变成「完全一致」——那说明对齐键（UUID 与坐标）都写进去了。
+    </div>
+  </div>
+</div>
+{{end}}

internal/web/templates/admin/fillup.html

@@ -0,0 +1,123 @@
+{{define "content"}}
+<div class="wrap">
+  <div class="page-head">
+    <div>
+      <h1>地点补全</h1>
+      <div class="sub">
+        共 <strong>{{num .Total}}</strong> 个地点缺活动或类别，其中 <strong>{{num .WithHint}}</strong> 个能给出建议。
+        <strong>只填空</strong>——已经有活动或类别的一律不动。
+      </div>
+    </div>
+    <div class="row"><a class="btn" href="/admin">← 返回后台</a></div>
+  </div>
+
+  {{if .Flash}}<div class="alert ok">{{.Flash}}</div>{{end}}
+  {{if .Err}}<div class="alert err">{{.Err}}</div>{{end}}
+
+  {{if .Rows}}
+  <div class="card">
+    <h2>待补全（{{num .Total}}）{{if gt .PageCount 1}}<span class="muted" style="font-size:13px;font-weight:400">　第 {{.PageNo}} / {{.PageCount}} 页</span>{{end}}</h2>
+    <div class="card-sub">
+      建议已经在下拉里<strong>选好</strong>了，不满意的改成别的、或选「（不动）」。
+      活动按<strong>地点</strong>补：一次把该地点名下所有没设活动的到访一起填上，不会只改一条。
+      填了现有列表之外的名字，会自动建成新的活动类型。
+      类别下拉里标着「真机用过」的是导出回 rond 时一定能认的；<br>
+      右侧「高德参考」写的是高德在这个坐标上找到的 POI 与类型，猜不出活动时拿它作判断。<br>
+      「用高德分析剩下的」每次处理 40 个、约 4 秒，结果会填进上面还没建议的行里，点多几次即可。
+    </div>
+    {{if gt .PageCount 1}}
+    <div class="pager">
+      {{if gt .PageNo 1}}<a href="{{.PageLink (sub .PageNo 1)}}">上一页</a>{{end}}
+      <span class="cur">第 {{.PageNo}} / {{.PageCount}} 页</span>
+      {{if lt .PageNo .PageCount}}<a href="{{.PageLink (add .PageNo 1)}}">下一页</a>{{end}}
+    </div>
+    <div class="card-sub" style="margin-bottom:10px">只提交<strong>本页</strong>的选择，翻页前先把这页提交掉。</div>
+    {{end}}
+    <form method="post" action="/admin/fillup/apply">
+      <input type="hidden" name="page" value="{{.PageNo}}">
+      <div class="tw">
+        <table class="tb tb-stack">
+          <thead>
+            <tr>
+              <th>地点</th><th>城市</th><th class="num">待设到访</th><th>缺什么</th>
+              <th>活动</th><th>类别</th><th>建议来源</th><th>高德参考</th>
+            </tr>
+          </thead>
+          <tbody>
+            {{range $row := .Rows}}
+            <tr>
+              <td>{{if $row.Name}}{{$row.Name}}{{else}}<span class="muted">（未命名）</span>{{end}}</td>
+              <td data-label="城市">{{if $row.City}}{{$row.City}}{{else}}<span class="muted">—</span>{{end}}</td>
+              <td class="num" data-label="待设到访">{{if $row.NoAct}}{{$row.NoAct}}{{else}}<span class="muted">—</span>{{end}}</td>
+              <td data-label="缺什么">{{$row.Missing}}</td>
+              <td data-label="活动">
+                {{if $row.NoAct}}
+                <select name="act_{{$row.PlaceID}}" class="fill-sel">
+                  <option value=""{{if not $row.ActHint}} selected{{end}}>（不动）</option>
+                  {{if $row.ActHint}}
+                  <option value="{{$row.ActHint}}" selected>建议：{{$row.ActHint}}{{if not $row.ActID}}（新建）{{end}}</option>
+                  {{end}}
+                  {{range $.Activities}}<option value="{{.Name}}">{{.Name}}</option>{{end}}
+                </select>
+                {{else}}<span class="muted">—</span>{{end}}
+              </td>
+              <td data-label="类别">
+                {{if $row.NoCat}}
+                {{$hint := $row.CatHint}}
+                <select name="cat_{{$row.PlaceID}}" class="fill-sel">
+                  <option value=""{{if not $hint}} selected{{end}}>（不动）</option>
+                  {{range $.Categories}}
+                  <option value="{{.Value}}"{{if eq .Value $hint}} selected{{end}}>{{.Label}}</option>
+                  {{end}}
+                </select>
+                {{else}}<span class="muted">—</span>{{end}}
+              </td>
+              <td data-label="建议来源">{{if $row.Source}}{{$row.Source}}{{else}}<span class="muted">—</span>{{end}}</td>
+              <td data-label="高德参考">
+                {{if $row.AmapType}}
+                <span style="font-size:12.5px">{{if $row.AmapPoi}}{{$row.AmapPoi}}<br>{{end}}<span class="muted">{{$row.AmapType}}</span></span>
+                {{else}}<span class="muted">—</span>{{end}}
+              </td>
+            </tr>
+            {{end}}
+          </tbody>
+        </table>
+      </div>
+      <div class="row" style="margin-top:12px">
+        <button class="btn primary" type="submit">执行补全</button>
+        <button class="btn" type="submit" formaction="/admin/fillup/amap"
+                title="用高德按坐标搜一遍，给还没建议的地点补上参考">用高德分析剩下的</button>
+      </div>
+    </form>
+    {{if gt .PageCount 1}}
+    <div class="pager" style="margin-top:12px">
+      {{if gt .PageNo 1}}<a href="{{.PageLink (sub .PageNo 1)}}">上一页</a>{{end}}
+      <span class="cur">第 {{.PageNo}} / {{.PageCount}} 页</span>
+      {{if lt .PageNo .PageCount}}<a href="{{.PageLink (add .PageNo 1)}}">下一页</a>{{end}}
+    </div>
+    {{end}}
+  </div>
+  {{else}}
+  <div class="card">
+    <div class="alert ok">所有地点的活动和类别都齐了，没什么要补的。</div>
+  </div>
+  {{end}}
+</div>
+
+<script>
+(function () {
+  // 选了东西还没提交就翻页，等于白填——拦一下（预选的那些建议不算「改过」）
+  var initial = {};
+  document.querySelectorAll('select.fill-sel').forEach(function (s) { initial[s.name] = s.value; });
+  document.querySelectorAll('.pager a').forEach(function (a) {
+    a.addEventListener('click', function (e) {
+      var dirty = false;
+      document.querySelectorAll('select.fill-sel').forEach(function (s) {
+        if (s.value !== initial[s.name]) dirty = true;
+      });
+      if (dirty && !confirm('这一页还有没提交的选择，翻页会丢掉。继续翻页？')) e.preventDefault();
+    });
+  });
+})();
+</script>
+{{end}}

internal/web/templates/admin/fog-preview.html

@@ -0,0 +1,174 @@
+{{define "content"}}
+<div class="wrap">
+  <div class="page-head">
+    <div>
+      <h1>迷雾导入预览</h1>
+      <div class="sub">这份快照<strong>还没有写入</strong>。先看清两种导入方式各自的后果，再决定用哪一种。</div>
+    </div>
+    <div class="row">
+      <a class="btn" href="/admin">← 返回后台</a>
+    </div>
+  </div>
+
+  <div class="card">
+    <h2>数量对比</h2>
+    <div class="tw">
+      <table class="tb tb-stack">
+        <thead>
+          <tr><th>状态</th><th class="num">块</th><th class="num">格</th><th class="num">面积</th></tr>
+        </thead>
+        <tbody>
+          <tr>
+            <td>当前迷雾</td>
+            <td class="num" data-label="块">{{num .Diff.CurBlocks}}</td>
+            <td class="num" data-label="格">{{num .Diff.CurCells}}</td>
+            <td class="num" data-label="面积">{{printf "%.1f" .Diff.CurAreaKm2}} km²</td>
+          </tr>
+          <tr>
+            <td>这份快照</td>
+            <td class="num" data-label="块">{{num .Diff.IncBlocks}}</td>
+            <td class="num" data-label="格">{{num .Diff.IncCells}}</td>
+            <td class="num" data-label="面积">{{printf "%.1f" .Diff.IncAreaKm2}} km²</td>
+          </tr>
+          <tr>
+            <td>叠加导入后</td>
+            <td class="num" data-label="块">{{num .Diff.CurBlocks}}<span class="muted"> +{{num .Diff.GainBlocks}}</span></td>
+            <td class="num" data-label="格">{{num .Diff.CurCells}}<span class="muted"> +{{num .Diff.GainCells}}</span></td>
+            <td class="num" data-label="面积">{{printf "%.1f" .Diff.MergeAreaKm2}} km²</td>
+          </tr>
+          <tr>
+            <td>整体替换后</td>
+            <td class="num" data-label="块">{{num .Diff.IncBlocks}}</td>
+            <td class="num" data-label="格">{{num .Diff.IncCells}}</td>
+            <td class="num" data-label="面积">{{printf "%.1f" .Diff.CoverAreaKm2}} km²</td>
+          </tr>
+        </tbody>
+      </table>
+    </div>
+    <div class="card-sub" style="margin-top:10px">
+      两个块坐标相同就只按位合并，所以「叠加后」的块数不会等于两边相加——快照里有 {{num .Diff.OverlapBlocks}} 个块与当前迷雾落在同一块，
+      其中 {{num .Diff.SameBlocks}} 个一格都不会变。
+    </div>
+  </div>
+
+  {{if .HasBounds}}
+  <div class="card">
+    <h2>差异地图</h2>
+    <div class="card-sub">在真实底图上核对差异落在哪些区域，可以缩放平移。</div>
+    <div class="row" style="gap:16px;margin:2px 0 10px;font-size:12.5px;flex-wrap:wrap">
+      <span style="display:flex;align-items:center;gap:6px">
+        <i style="width:13px;height:13px;border-radius:3px;background:#24a45a;display:inline-block"></i>叠加会新增
+      </span>
+      <span style="display:flex;align-items:center;gap:6px">
+        <i style="width:13px;height:13px;border-radius:3px;background:#7e8692;display:inline-block"></i>两边都有
+      </span>
+      <span style="display:flex;align-items:center;gap:6px">
+        <i style="width:13px;height:13px;border-radius:3px;background:#d63838;display:inline-block"></i>整体替换会丢掉
+      </span>
+    </div>
+    <div id="fog-diff-map" style="height:400px;border-radius:10px;background:var(--line-soft)"
+         data-token="{{.Token}}"
+         data-min-lat="{{printf "%.6f" .MinLat}}" data-min-lon="{{printf "%.6f" .MinLon}}"
+         data-max-lat="{{printf "%.6f" .MaxLat}}" data-max-lon="{{printf "%.6f" .MaxLon}}"></div>
+  </div>
+  {{end}}
+
+  <div class="card">
+    <h2>叠加导入</h2>
+    {{if .Diff.Changed}}
+    <div class="alert ok">
+      会补上当前迷雾没有的 <strong>{{num .Diff.GainBlocks}}</strong> 块、<strong>{{num .Diff.GainCells}}</strong> 格
+      （约 {{printf "%.1f" .Diff.GainAreaKm2}} km²）。叠加只做按位合并，<strong>不会丢失任何已有数据</strong>。
+    </div>
+    {{else}}
+    <div class="alert err">
+      这份快照的点亮区域已经被当前迷雾<strong>完全覆盖</strong>——叠加导入不会带来任何变化，
+      多半是同一批数据又导出了一次。
+    </div>
+    {{end}}
+    <form method="post" action="/admin/fog?stash={{.Token}}"
+          onsubmit="this.querySelector('button').disabled=true">
+      <input type="hidden" name="mode" value="overlay">
+      <button class="btn primary" type="submit">叠加导入</button>
+    </form>
+  </div>
+
+  <div class="card">
+    <h2>整体替换</h2>
+    {{if gt .Diff.LostCells 0}}
+    <div class="alert err">
+      ⚠️ 快照里<strong>没有</strong>当前迷雾的 <strong>{{num .Diff.LostBlocks}}</strong> 块、<strong>{{num .Diff.LostCells}}</strong> 格
+      （约 {{printf "%.1f" .Diff.LostAreaKm2}} km²）。整体替换后，这些区域会<strong>从点亮变回未探索</strong>，且无法恢复。
+    </div>
+    {{else}}
+    <div class="alert ok">
+      这份快照完整包含了当前迷雾的全部点亮区域，替换不会丢数据。
+    </div>
+    {{end}}
+    {{if and (eq .TildeLayers 0) (eq .HashLayers 0)}}
+    <div class="alert err">
+      ⚠️ 快照里没有 <span class="mono">Model/~</span> 与 <span class="mono">Model/#</span> 两层数据，替换会把现有的这两层一并清掉。
+    </div>
+    {{else}}
+    <div class="muted" style="font-size:12.5px;margin-bottom:8px">
+      另外，站点不解析但会留存的 <span class="mono">Model/~</span>（{{.TildeLayers}} 项）与
+      <span class="mono">Model/#</span>（{{.HashLayers}} 项）也会一并换成这份快照里的{{if .OtherLayers}}，另有 {{.OtherLayers}} 项其它条目{{end}}。
+    </div>
+    {{end}}
+    <form method="post" action="/admin/fog?stash={{.Token}}"
+          onsubmit="return confirm('整体替换会清空当前迷雾。{{if gt .Diff.LostCells 0}}快照里缺 {{num .Diff.LostCells}} 格，替换后这些区域会变回未探索，且不可恢复。{{end}}确认替换？')">
+      <input type="hidden" name="mode" value="cover">
+      <button class="btn danger" type="submit">整体替换</button>
+    </form>
+  </div>
+</div>
+
+<script>
+(function () {
+  // Leaflet 由 layout 在 content 之后引入，脚本执行时 window.L 还没有，
+  // 必须等 load 之后再初始化，否则地图整个不出现（与迷雾遮罩页同一条约定）
+  function whenReady(cb) {
+    if (document.readyState === 'complete') { setTimeout(cb, 0); return; }
+    window.addEventListener('load', cb);
+  }
+
+  var el = document.getElementById('fog-diff-map');
+  if (!el) return;
+
+  // 底图走站点配置（与迷雾遮罩页同一套取法）：带密钥的图层由服务端转发，
+  // 免密钥的是浏览器直连的 {s} 模板，不能硬写 /tiles/ 路由
+  var fallback = {
+    def: { url: 'https://webrd0{s}.is.autonavi.com/appmaptile?lang=zh_cn&size=1&scale=1&style=8&x={x}&y={y}&z={z}', maxZoom: 18, attr: '© 高德地图', crs: 'gcj02' },
+    subs: ['1', '2', '3', '4']
+  };
+
+  function init(cfg) {
+    var def = cfg.def;
+    var map = L.map(el, { scrollWheelZoom: false });
+    L.tileLayer(def.url, { subdomains: cfg.subs, maxZoom: def.maxZoom || 18, minZoom: 3, attribution: def.attr || '' }).addTo(map);
+    // 差异瓦片必须和底图同坐标系：迷雾网格是 WGS-84，服务端按 crs 逐块纠偏
+    L.tileLayer('/admin/fog/preview/' + el.dataset.token + '/{z}/{x}/{y}?crs=' + (def.crs || 'gcj02'), {
+      minZoom: 3, maxZoom: 18, opacity: 0.95
+    }).addTo(map);
+    var b = [
+      [parseFloat(el.dataset.minLat), parseFloat(el.dataset.minLon)],
+      [parseFloat(el.dataset.maxLat), parseFloat(el.dataset.maxLon)]
+    ];
+    // 只有一个块时两个角重合，不设上限会一路放大到最大级别
+    map.fitBounds(b, { padding: [24, 24], maxZoom: 13 });
+    L.control.scale({ imperial: false }).addTo(map);
+  }
+
+  whenReady(function () {
+    if (!window.L) return;
+    fetch('/api/map-config', { headers: { 'Accept': 'application/json' } })
+      .then(function (r) { return r.json(); })
+      .then(function (c) {
+        var def = (c && c.base && c.base.length) ? c.base[0] : fallback.def;
+        init({ def: def, subs: (c && c.subs && c.subs.length) ? c.subs : fallback.subs });
+      })
+      .catch(function () { init(fallback); });
+  });
+})();
+</script>
+{{end}}

internal/web/templates/admin/index.html

@@ -12,6 +12,7 @@
       <a class="btn" href="/admin/settings">站点设置</a>
       <a class="btn" href="/admin/twofa">两步验证</a>
       <a class="btn" href="/admin/notes">地点备注</a>
+      <a class="btn" href="/admin/fillup">地点补全</a>
       <a class="btn" href="/admin/password">账号设置</a>
       <a class="btn" href="/" target="_blank">查看站点</a>
     </div>
@@ -29,6 +30,7 @@
       <b>上传是以备份为准重建数据</b>：站点里删掉的地点、改过的记录，只要下次传一份
       <b>内容不同</b>的备份，就会被备份里的原样覆盖回来（重复传同一份文件不会，会提示「完全一致」）。
       在站点上新加的地点属于当时那个数据集，传新备份后要看它们，可在下面的数据集列表里切回。
+      <br><b>拿不准就先用「分析差异」</b>：它会逐条比对这份备份与站内当前数据，告诉你哪些是新增、哪些只在站内有、哪些两边不一样，看完再决定要不要导入。
     </div>
     <form method="post" action="/admin/upload" enctype="multipart/form-data">
       <label class="f" style="max-width:520px">
@@ -36,7 +38,10 @@
         <input type="file" name="backup" accept=".rondbackup,.zip" required
                style="padding:8px;border:1px dashed var(--line);border-radius:8px;background:var(--bg-2)">
       </label>
-      <button class="btn primary" type="submit">上传并导入</button>
+      <div class="row">
+        <button class="btn primary" type="submit" formaction="/admin/preview">分析差异</button>
+        <button class="btn" type="submit" formaction="/admin/upload">直接导入</button>
+      </div>
     </form>
   </div>
 
@@ -53,21 +58,18 @@
         <b>尚未导入迷雾</b>——把 Fog of World 的 <span class="mono">.fwss</span>（在 App 内导出，通常在 zip 里）上传即可点亮地图。
       {{end}}
     </div>
-    <form method="post" action="/admin/fog" enctype="multipart/form-data">
+    <form method="post" action="/admin/fog/preview" enctype="multipart/form-data">
       <label class="f" style="max-width:520px">
         <span>选择快照</span>
         <input type="file" name="fwss" accept=".fwss,.zip" required
                style="padding:8px;border:1px dashed var(--line);border-radius:8px;background:var(--bg-2)">
       </label>
-      <label class="f" style="max-width:520px">
+      <button class="btn primary" type="submit">分析差异</button>
-        <span>导入方式</span>
-        <select name="mode">
-          <option value="overlay" selected>叠加 — 保留现有迷雾，把新路线合并进来</option>
-          <option value="cover">覆盖 — 清空现有迷雾，整体替换</option>
-        </select>
-      </label>
-      <button class="btn primary" type="submit">导入迷雾</button>
     </form>
+    <div class="muted" style="font-size:12.5px;margin-top:8px">
+      上传后<strong>先不写入</strong>：会先给出这份快照能补多少新区域、以及「整体替换」会丢掉多少已有区域，
+      确认之后才真正导入。
+    </div>
     {{if gt .FogBlocks 0}}
     <div style="margin:10px 0 0;display:flex;gap:8px;flex-wrap:wrap">
       <a class="btn" href="/admin/fog/export">导出当前迷雾（.fwss）</a>

internal/web/view.go

@@ -14,6 +14,7 @@ import (
 
 	"rond-with-you/internal/auth"
 	"rond-with-you/internal/fog"
+	"rond-with-you/internal/rond"
 	"rond-with-you/internal/setting"
 	"rond-with-you/internal/stats"
 	"rond-with-you/internal/votes"
@@ -637,6 +638,74 @@ type AdminData struct {
 	DefaultPW bool
 }
 
+// VisitRow 是一条到访摊平后的展示行。地点与活动写名称而不是编号——
+// 两边的编号空间完全不同，编号对人没有任何意义。
+type VisitRow struct {
+	// Key 是这条冲突的对齐键（到访 UUID），合并表单拿它当字段名
+	Key string
+	// SrcPK 只有「仅站内有」的行有意义：要删哪条就勾哪条
+	SrcPK     int
+	Arrival   *time.Time
+	Departure *time.Time
+	Place     string
+	Activity  string
+	Remark    string
+	Emoji     string
+	UserAdded bool // 站点补录的行
+	Fields    []rond.FieldChange
+}
+
+// BackupDiffData 是「备份差异预览」页的数据。
+//
+// 上限说明：列表按 diffListLimit 截断，页面上只提示「还有更多」，不做分页——
+// 预演是给人下判断用的，看前 200 条足够判断要不要继续；真正要逐条取舍的是
+// 后面那个合并流程（那里才有逐条操作）。
+type BackupDiffData struct {
+	Page
+	Token       string
+	DatasetName string
+
+	VisitCounts rond.Counts
+	PlaceCounts rond.Counts
+	ActCounts   rond.Counts
+
+	VisitAdded, VisitGone, VisitClash []VisitRow
+	PlaceAdded                        []rond.Location
+	PlaceGone                         []rond.StoredPlace
+	PlaceClash                        []rond.PlaceConflict
+	ActAdded                          []rond.Activity
+	ActGone                           []rond.StoredActivity
+	ActClash                          []rond.ActivityConflict
+
+	// 两侧总量，用于「有没有少数据」的直觉判断
+	BackupVisits, StoredVisits       int
+	BackupPlaces, StoredPlaces       int
+	BackupActs, StoredActs           int
+	BackupMovements, StoredMovements int
+	BackupWeather, StoredWeather     int
+	BackupRaw                        int
+
+	Truncated bool
+	Identical bool
+}
+
+// FogPreviewData 是「迷雾导入预览」页的数据：先把差异摆出来，再决定叠加还是整体替换。
+type FogPreviewData struct {
+	Page
+	Token string
+	Diff  fog.Diff
+	// 快照里不参与渲染、但整体替换会一并换掉的图层条目数
+	TildeLayers int
+	HashLayers  int
+	OtherLayers int
+
+	// 差异地图的初始视野：两边块集覆盖范围的包围盒（已按底图坐标系换算）。
+	// 没有任何块时 HasBounds 为假，模板不画地图。
+	HasBounds      bool
+	MinLat, MinLon float64
+	MaxLat, MaxLon float64
+}
+
 type NotesData struct {
 	Page
 	Rows        []NoteRow
@@ -1199,6 +1268,15 @@ var poiNames = map[string]string{
 	"MKPOICategoryPharmacy": "药店", "MKPOICategoryHospital": "医院", "MKPOICategorySpa": "水疗",
 	"MKPOICategoryAirport": "机场", "MKPOICategoryMarina": "码头", "MKPOICategoryPostOffice": "邮局",
 	"MKPOICategoryMarina2": "码头",
+
+	"MKPOICategoryBakery": "面包店", "MKPOICategoryLibrary": "图书馆",
+	"MKPOICategoryUniversity": "大学", "MKPOICategoryAquarium": "水族馆",
+	"MKPOICategoryFitnessCenter": "健身中心", "MKPOICategoryMovieTheater": "电影院",
+	"MKPOICategoryTheater": "剧院", "MKPOICategoryParking": "停车场",
+	"MKPOICategoryBank": "银行", "MKPOICategoryAtm": "取款机",
+	"MKPOICategoryPolice": "派出所", "MKPOICategoryCarRental": "租车",
+	"MKPOICategoryGasStation": "加油站", "MKPOICategoryAmusementPark": "游乐园",
+	"MKPOICategoryRestroom": "洗手间", "MKPOICategoryFireStation": "消防站",
 }
 
 func poiName(s string) string {
@@ -1247,6 +1325,8 @@ func templateFuncs() template.FuncMap {
 		"km": func(f float64) string { return fmt.Sprintf("%.1f", f) },
 		"f1": func(f float64) string { return fmt.Sprintf("%.1f", f) },
 		"dt": func(t time.Time) string { return t.Local().Format("2006-01-02 15:04") },
+		// actKey 给活动冲突生成表单字段名，与处理函数共用同一套键
+		"actKey": rond.ActivityKey,
 		// dtt 接受 *time.Time，nil 返回空串，便于可选时间字段直接渲染
 		"dtt": func(t *time.Time) string {
 			if t == nil {

tools/colprobe/main.go

@@ -0,0 +1,89 @@
+// 一次性探针：验证 ZLOCATION.ZPLACEID / ZVISIT.ZEVENTIDENTIFIER 是否跨备份稳定。
+package main
+
+import (
+	"fmt"
+	"os"
+
+	"rond-with-you/internal/rond"
+)
+
+type snap struct {
+	placeID map[string]int
+	eventID map[string]int
+	nulls   int
+	total   int
+	evTotal int
+}
+
+func load(p string) *snap {
+	dir, err := os.MkdirTemp("", "colprobe")
+	if err != nil {
+		panic(err)
+	}
+	defer os.RemoveAll(dir)
+	db, err := rond.Open(p, dir)
+	if err != nil {
+		panic(err)
+	}
+	defer db.Close()
+	s := &snap{placeID: map[string]int{}, eventID: map[string]int{}}
+
+	rows, err := db.Query(`SELECT Z_PK, COALESCE(ZPLACEID,'') FROM ZLOCATION`)
+	if err != nil {
+		panic(err)
+	}
+	for rows.Next() {
+		var pk int
+		var id string
+		rows.Scan(&pk, &id)
+		s.total++
+		if id == "" {
+			s.nulls++
+		} else {
+			s.placeID[id] = pk
+		}
+	}
+	rows.Close()
+
+	rows, err = db.Query(`SELECT COALESCE(ZEVENTIDENTIFIER,'') FROM ZVISIT`)
+	if err != nil {
+		panic(err)
+	}
+	for rows.Next() {
+		var id string
+		rows.Scan(&id)
+		if id != "" {
+			s.eventID[id] = 1
+			s.evTotal++
+		}
+	}
+	rows.Close()
+	fmt.Printf("%s: ZLOCATION %d 个（ZPLACEID 空 %d），ZEVENTIDENTIFIER 非空 %d\n",
+		p, s.total, s.nulls, s.evTotal)
+	return s
+}
+
+func main() {
+	a := load(os.Args[1])
+	b := load(os.Args[2])
+	inter, samePK := 0, 0
+	for k, pa := range a.placeID {
+		if pb, ok := b.placeID[k]; ok {
+			inter++
+			if pa == pb {
+				samePK++
+			}
+		}
+	}
+	fmt.Printf("\nZPLACEID 交集 %d（A 独有 %d，B 独有 %d），其中 Z_PK 相同 %d\n",
+		inter, len(a.placeID)-inter, len(b.placeID)-inter, samePK)
+
+	ei := 0
+	for k := range a.eventID {
+		if _, ok := b.eventID[k]; ok {
+			ei++
+		}
+	}
+	fmt.Printf("ZEVENTIDENTIFIER 交集 %d（A %d / B %d）\n", ei, len(a.eventID), len(b.eventID))
+}

tools/diffprobe/main.go

@@ -0,0 +1,438 @@
+// 一次性探针：把一份 .rondbackup 与 PG 里某个数据集的记录逐条对齐，输出差异画像。
+// 用完即可删，不属于站点功能。
+package main
+
+import (
+	"context"
+	"database/sql"
+	"fmt"
+	"os"
+	"sort"
+	"time"
+
+	_ "github.com/jackc/pgx/v5/stdlib"
+
+	"rond-with-you/internal/rond"
+)
+
+func main() {
+	if len(os.Args) < 4 {
+		fmt.Println("用法: diffprobe <archive.rondbackup> <dsn> <datasetID>")
+		os.Exit(2)
+	}
+	archive, dsn := os.Args[1], os.Args[2]
+	var datasetID int64
+	fmt.Sscanf(os.Args[3], "%d", &datasetID)
+
+	tmp, err := os.MkdirTemp("", "diffprobe")
+	must(err)
+	defer os.RemoveAll(tmp)
+
+	sqlDB, err := rond.Open(archive, tmp)
+	must(err)
+	b, err := rond.Parse(sqlDB)
+	sqlDB.Close()
+	must(err)
+
+	pg, err := sql.Open("pgx", dsn)
+	must(err)
+	defer pg.Close()
+	ctx := context.Background()
+	must(pg.PingContext(ctx))
+
+	fmt.Printf("=== 备份 %s ===\n", archive)
+	fmt.Printf("备份: 到访 %d / 地点 %d / 位移 %d / 天气 %d / 活动 %d / 标签 %d / 原始定位 %d\n",
+		len(b.Visits), len(b.Locations), len(b.Movements), len(b.Weather),
+		len(b.Activities), len(b.Tags), b.RawVisitNum)
+	var bFirst, bLast sql.NullTime
+	for _, v := range b.Visits {
+		if v.Arrival == nil {
+			continue
+		}
+		if !bFirst.Valid || v.Arrival.Before(bFirst.Time) {
+			bFirst = sql.NullTime{Time: *v.Arrival, Valid: true}
+		}
+		if !bLast.Valid || v.Arrival.After(bLast.Time) {
+			bLast = sql.NullTime{Time: *v.Arrival, Valid: true}
+		}
+	}
+	fmt.Printf("备份时间跨度: %s ~ %s\n", ts(bFirst), ts(bLast))
+
+	fmt.Printf("\n=== 库内 dataset #%d ===\n", datasetID)
+	var name string
+	var cnt, pcnt, raw int
+	var gFirst, gLast sql.NullTime
+	must(pg.QueryRowContext(ctx, `SELECT original_name, visit_count, place_count, raw_visit_count,
+		first_visit_at, last_visit_at FROM datasets WHERE id=$1`, datasetID).
+		Scan(&name, &cnt, &pcnt, &raw, &gFirst, &gLast))
+	fmt.Printf("%s: 到访 %d / 地点 %d / 原始定位 %d，跨度 %s ~ %s\n", name, cnt, pcnt, raw, ts(gFirst), ts(gLast))
+
+	diffVisits(ctx, pg, datasetID, b)
+	diffPlaces(ctx, pg, datasetID, b)
+	diffMovements(ctx, pg, datasetID, b)
+	diffWeather(ctx, pg, datasetID, b)
+	diffActivities(ctx, pg, datasetID, b)
+	diffTags(ctx, pg, datasetID, b)
+}
+
+func ts(t sql.NullTime) string {
+	if !t.Valid {
+		return "-"
+	}
+	return t.Time.Local().Format("2006-01-02 15:04")
+}
+
+type visitRow struct {
+	pk, placeSrc, actSrc int
+	arrival, departure   *time.Time
+	remark, emoji        string
+	bookmarked, userAdd  bool
+}
+
+func diffVisits(ctx context.Context, pg *sql.DB, dsID int64, b *rond.Backup) {
+	fmt.Printf("\n---------- 到访 ----------\n")
+	rows, err := pg.QueryContext(ctx, `SELECT v.src_pk, COALESCE(p.src_pk,0), COALESCE(a.src_pk,0),
+		v.arrival, v.departure, COALESCE(v.remark,''), COALESCE(v.emoji,''), v.bookmarked, v.is_user_added
+		FROM visits v LEFT JOIN places p ON p.id=v.place_id LEFT JOIN activities a ON a.id=v.activity_id
+		WHERE v.dataset_id=$1`, dsID)
+	must(err)
+	db := map[int]visitRow{}
+	for rows.Next() {
+		var r visitRow
+		var arr time.Time
+		var dep sql.NullTime
+		must(rows.Scan(&r.pk, &r.placeSrc, &r.actSrc, &arr, &dep, &r.remark, &r.emoji, &r.bookmarked, &r.userAdd))
+		r.arrival = &arr
+		if dep.Valid {
+			r.departure = &dep.Time
+		}
+		db[r.pk] = r
+	}
+	rows.Close()
+
+	bk := map[int]rond.Visit{}
+	for _, v := range b.Visits {
+		bk[v.SrcPK] = v
+	}
+
+	var onlyBackup, onlyDB, bothDiff, same []int
+	for pk, v := range bk {
+		r, ok := db[pk]
+		if !ok {
+			onlyBackup = append(onlyBackup, pk)
+			continue
+		}
+		if vdiff(v, r) != "" {
+			bothDiff = append(bothDiff, pk)
+			continue
+		}
+		same = append(same, pk)
+	}
+	for pk := range db {
+		if _, ok := bk[pk]; !ok {
+			onlyDB = append(onlyDB, pk)
+		}
+	}
+	sort.Ints(onlyBackup)
+	sort.Ints(onlyDB)
+	sort.Ints(bothDiff)
+
+	fmt.Printf("同号且一致: %d\n", len(same))
+	fmt.Printf("仅备份有（实机新增，库里没有）: %d\n", len(onlyBackup))
+	fmt.Printf("仅库里有（站点侧新增/实机已删除）: %d\n", len(onlyDB))
+	fmt.Printf("同号但内容不同（冲突）: %d\n", len(bothDiff))
+
+	// 按到达时间做多重集匹配：判断「同号冲突」到底是同批数据换了主键，还是两批无关数据
+	byTime := map[string][]int{}
+	for pk, r := range db {
+		if r.arrival != nil {
+			byTime[r.arrival.UTC().Format(time.RFC3339)] = append(byTime[r.arrival.UTC().Format(time.RFC3339)], pk)
+		}
+	}
+	matched, miss := 0, 0
+	pair := [][2]int{}
+	for pk, v := range bk {
+		if v.Arrival == nil {
+			continue
+		}
+		k := v.Arrival.UTC().Format(time.RFC3339)
+		if list := byTime[k]; len(list) > 0 {
+			matched++
+			pair = append(pair, [2]int{pk, list[0]})
+			byTime[k] = list[1:]
+		} else {
+			miss++
+		}
+	}
+	fmt.Printf("\n[时间对齐] 备份到访按「到达时刻」能在库内找到同刻记录: %d 条，找不到: %d 条\n", matched, miss)
+	sort.Slice(pair, func(i, j int) bool { return pair[i][0] < pair[j][0] })
+	fmt.Printf("[时间对齐] 同刻对的 (备份pk→库pk) 前 12 组: ")
+	for i, p := range pair {
+		if i >= 12 {
+			break
+		}
+		fmt.Printf("%d→%d ", p[0], p[1])
+	}
+	fmt.Println()
+	nDiff := 0
+	for _, p := range pair {
+		if p[0] != p[1] {
+			nDiff++
+		}
+	}
+	fmt.Printf("[时间对齐] 同刻但主键不同: %d / %d\n", nDiff, len(pair))
+
+	show := func(label string, pks []int, f func(pk int) string) {
+		if len(pks) == 0 {
+			return
+		}
+		fmt.Printf("\n[%s] 共 %d 条，前 8 条：\n", label, len(pks))
+		for i, pk := range pks {
+			if i >= 8 {
+				break
+			}
+			fmt.Printf("  #%d %s\n", pk, f(pk))
+		}
+	}
+	show("仅备份有", onlyBackup, func(pk int) string {
+		v := bk[pk]
+		return fmt.Sprintf("到访 %s 离开 %s 地点src=%s", ft(v.Arrival), ft(v.Departure), ps(v.LocationSrcPK))
+	})
+	show("仅库里有", onlyDB, func(pk int) string {
+		r := db[pk]
+		return fmt.Sprintf("到访 %s 离开 %s 地点src=%d 站点新增=%v 备注=%q",
+			ft(r.arrival), ftp(r.departure), r.placeSrc, r.userAdd, r.remark)
+	})
+	show("冲突", bothDiff, func(pk int) string {
+		return vdiff(bk[pk], db[pk])
+	})
+}
+
+func vdiff(v rond.Visit, r visitRow) string {
+	var d string
+	if !eq(v.Arrival, r.arrival) {
+		d += fmt.Sprintf("到达 %s→%s ", ft(v.Arrival), ft(r.arrival))
+	}
+	if !eq(v.Departure, r.departure) {
+		d += fmt.Sprintf("离开 %s→%s ", ft(v.Departure), ft(r.departure))
+	}
+	if pv(v.LocationSrcPK) != r.placeSrc {
+		d += fmt.Sprintf("地点 %s→%d ", ps(v.LocationSrcPK), r.placeSrc)
+	}
+	if av(v.ActivitySrcPK) != r.actSrc {
+		d += fmt.Sprintf("活动 %s→%d ", ps(v.ActivitySrcPK), r.actSrc)
+	}
+	if v.Remark != r.remark {
+		d += fmt.Sprintf("备注 %q→%q ", v.Remark, r.remark)
+	}
+	if v.Emoji != r.emoji {
+		d += fmt.Sprintf("表情 %q→%q ", v.Emoji, r.emoji)
+	}
+	if v.Bookmarked != r.bookmarked {
+		d += fmt.Sprintf("收藏 %v→%v ", v.Bookmarked, r.bookmarked)
+	}
+	return d
+}
+
+func diffPlaces(ctx context.Context, pg *sql.DB, dsID int64, b *rond.Backup) {
+	fmt.Printf("\n---------- 地点 ----------\n")
+	type prow struct {
+		name, poi, cc, prov, city, dist, sub, thor, tz string
+		lat, lon                                       float64
+	}
+	rows, err := pg.QueryContext(ctx, `SELECT src_pk, COALESCE(name,''), COALESCE(poi_category,''),
+		COALESCE(country_code,''), COALESCE(province,''), COALESCE(city,''), COALESCE(district,''),
+		COALESCE(sublocality,''), COALESCE(thoroughfare,''), COALESCE(timezone,''),
+		COALESCE(lat,0), COALESCE(lon,0) FROM places WHERE dataset_id=$1`, dsID)
+	must(err)
+	db := map[int]prow{}
+	for rows.Next() {
+		var pk int
+		var r prow
+		must(rows.Scan(&pk, &r.name, &r.poi, &r.cc, &r.prov, &r.city, &r.dist, &r.sub, &r.thor, &r.tz, &r.lat, &r.lon))
+		db[pk] = r
+	}
+	rows.Close()
+
+	bk := map[int]rond.Location{}
+	for _, l := range b.Locations {
+		bk[l.SrcPK] = l
+	}
+	var onlyB, onlyD, diff []int
+	for pk, l := range bk {
+		r, ok := db[pk]
+		if !ok {
+			onlyB = append(onlyB, pk)
+			continue
+		}
+		if l.Name != r.name || l.POICategory != r.poi || l.Province != r.prov || l.City != r.city ||
+			l.District != r.dist || l.Sublocality != r.sub || l.Thoroughfare != r.thor || l.Timezone != r.tz ||
+			l.CountryCode != r.cc || !near(l.Lat, r.lat) || !near(l.Lon, r.lon) {
+			diff = append(diff, pk)
+		}
+	}
+	for pk := range db {
+		if _, ok := bk[pk]; !ok {
+			onlyD = append(onlyD, pk)
+		}
+	}
+	sort.Ints(onlyB)
+	sort.Ints(onlyD)
+	sort.Ints(diff)
+	fmt.Printf("仅备份有: %d，仅库里有: %d，同号内容不同: %d\n", len(onlyB), len(onlyD), len(diff))
+	for i, pk := range onlyB {
+		if i >= 6 {
+			break
+		}
+		fmt.Printf("  仅备份 #%d %s (%s %s %s)\n", pk, bk[pk].Name, bk[pk].Province, bk[pk].City, bk[pk].POICategory)
+	}
+	for i, pk := range onlyD {
+		if i >= 6 {
+			break
+		}
+		fmt.Printf("  仅库内 #%d %s (%s %s)\n", pk, db[pk].name, db[pk].prov, db[pk].city)
+	}
+	for i, pk := range diff {
+		if i >= 6 {
+			break
+		}
+		l, r := bk[pk], db[pk]
+		fmt.Printf("  冲突 #%d 备份[name=%q city=%q %.6f,%.6f] 库[name=%q city=%q %.6f,%.6f]\n",
+			pk, l.Name, l.City, l.Lat, l.Lon, r.name, r.city, r.lat, r.lon)
+	}
+}
+
+func diffMovements(ctx context.Context, pg *sql.DB, dsID int64, b *rond.Backup) {
+	fmt.Printf("\n---------- 位移 ----------\n")
+	rows, err := pg.QueryContext(ctx, `SELECT src_pk, COALESCE(transport_src,0),
+		COALESCE(from_visit_src,0), COALESCE(to_visit_src,0), started_at, ended_at
+		FROM movements WHERE dataset_id=$1`, dsID)
+	must(err)
+	type mrow struct {
+		t, f, to int
+		s, e     *time.Time
+	}
+	db := map[int]mrow{}
+	for rows.Next() {
+		var pk int
+		var r mrow
+		var s, e sql.NullTime
+		must(rows.Scan(&pk, &r.t, &r.f, &r.to, &s, &e))
+		if s.Valid {
+			r.s = &s.Time
+		}
+		if e.Valid {
+			r.e = &e.Time
+		}
+		db[pk] = r
+	}
+	rows.Close()
+	var onlyB, onlyD int
+	for _, m := range b.Movements {
+		if _, ok := db[m.SrcPK]; !ok {
+			onlyB++
+		}
+	}
+	for pk := range db {
+		found := false
+		for _, m := range b.Movements {
+			if m.SrcPK == pk {
+				found = true
+				break
+			}
+		}
+		if !found {
+			onlyD++
+		}
+	}
+	fmt.Printf("备份 %d 条 / 库内 %d 条；仅备份有 %d，仅库里有 %d\n", len(b.Movements), len(db), onlyB, onlyD)
+}
+
+func diffWeather(ctx context.Context, pg *sql.DB, dsID int64, b *rond.Backup) {
+	var n int
+	must(pg.QueryRowContext(ctx, `SELECT count(*) FROM weather WHERE dataset_id=$1`, dsID).Scan(&n))
+	fmt.Printf("\n---------- 天气 ----------\n备份 %d 条 / 库内 %d 条\n", len(b.Weather), n)
+}
+
+func diffActivities(ctx context.Context, pg *sql.DB, dsID int64, b *rond.Backup) {
+	fmt.Printf("\n---------- 活动类型 ----------\n")
+	rows, err := pg.QueryContext(ctx, `SELECT src_pk, name FROM activities WHERE dataset_id=$1`, dsID)
+	must(err)
+	db := map[int]string{}
+	for rows.Next() {
+		var pk int
+		var n string
+		must(rows.Scan(&pk, &n))
+		db[pk] = n
+	}
+	rows.Close()
+	for _, a := range b.Activities {
+		n, ok := db[a.SrcPK]
+		if !ok {
+			fmt.Printf("  仅备份 #%d %q\n", a.SrcPK, a.Name)
+		} else if n != a.Name {
+			fmt.Printf("  冲突 #%d 备份=%q 库=%q\n", a.SrcPK, a.Name, n)
+		}
+	}
+	for pk, n := range db {
+		found := false
+		for _, a := range b.Activities {
+			if a.SrcPK == pk {
+				found = true
+			}
+		}
+		if !found {
+			fmt.Printf("  仅库内 #%d %q\n", pk, n)
+		}
+	}
+}
+
+func diffTags(ctx context.Context, pg *sql.DB, dsID int64, b *rond.Backup) {
+	var n int
+	must(pg.QueryRowContext(ctx, `SELECT count(*) FROM tags WHERE dataset_id=$1`, dsID).Scan(&n))
+	fmt.Printf("\n---------- 标签 ----------\n备份 %d 条 / 库内 %d 条\n", len(b.Tags), n)
+}
+
+func eq(a, b *time.Time) bool {
+	if a == nil || b == nil {
+		return a == nil && b == nil
+	}
+	return a.Equal(*b)
+}
+
+func pv(p *int) int {
+	if p == nil {
+		return 0
+	}
+	return *p
+}
+
+func av(p *int) int { return pv(p) }
+
+func ps(p *int) string {
+	if p == nil {
+		return "-"
+	}
+	return fmt.Sprint(*p)
+}
+
+func ft(t *time.Time) string {
+	if t == nil {
+		return "-"
+	}
+	return t.Local().Format("01-02 15:04")
+}
+
+func ftp(t *time.Time) string { return ft(t) }
+
+func near(a, b float64) bool {
+	d := a - b
+	return d < 1e-9 && d > -1e-9
+}
+
+func must(err error) {
+	if err != nil {
+		fmt.Fprintln(os.Stderr, "错误:", err)
+		os.Exit(1)
+	}
+}

tools/exportprobe/main.go

@@ -0,0 +1,40 @@
+// 一次性探针：调用站点的导出逻辑产出一份 .rondbackup，用于核对
+// 「站点导出 → 导入 rond → rond 再导出」这条链路上 UUID 与 Z_PK 是否还连贯。
+package main
+
+import (
+	"context"
+	"database/sql"
+	"fmt"
+	"os"
+	"strconv"
+
+	_ "github.com/jackc/pgx/v5/stdlib"
+
+	"rond-with-you/internal/rond"
+)
+
+func main() {
+	if len(os.Args) < 5 {
+		fmt.Println("用法: exportprobe <dsn> <datasetID> <baseline.sqlite> <out.rondbackup>")
+		os.Exit(2)
+	}
+	dsID, err := strconv.ParseInt(os.Args[2], 10, 64)
+	must(err)
+	db, err := sql.Open("pgx", os.Args[1])
+	must(err)
+	defer db.Close()
+
+	f, err := os.Create(os.Args[4])
+	must(err)
+	defer f.Close()
+	must(rond.ExportRondbackup(context.Background(), db, dsID, os.Args[3], f))
+	fmt.Printf("已导出到 %s\n", os.Args[4])
+}
+
+func must(err error) {
+	if err != nil {
+		fmt.Fprintln(os.Stderr, "错误:", err)
+		os.Exit(1)
+	}
+}

tools/fogprobe/main.go

@@ -0,0 +1,133 @@
+// 一次性探针：把一份 .fwss 与 PG 里的 fog_blocks 逐块比对，量化「叠加 / 替换」两种模式的影响。
+package main
+
+import (
+	"database/sql"
+	"encoding/hex"
+	"fmt"
+	"os"
+	"strconv"
+	"strings"
+
+	_ "github.com/jackc/pgx/v5/stdlib"
+
+	"rond-with-you/internal/fog"
+)
+
+func main() {
+	if len(os.Args) < 3 {
+		fmt.Println("用法: fogprobe <snapshot.fwss> <dsn> [userID]")
+		os.Exit(2)
+	}
+	uid := int64(1)
+	if len(os.Args) > 3 {
+		uid, _ = strconv.ParseInt(os.Args[3], 10, 64)
+	}
+	data, err := os.ReadFile(os.Args[1])
+	must(err)
+	inc, incCells, err := fog.Decode(data)
+	must(err)
+	fmt.Printf("快照 %s: %d 块 / %d 格\n", os.Args[1], len(inc), incCells)
+
+	pg, err := sql.Open("pgx", os.Args[2])
+	must(err)
+	defer pg.Close()
+	rows, err := pg.Query(`SELECT gbx, gby, bitmap FROM fog_blocks WHERE user_id=$1`, uid)
+	must(err)
+	local := map[[2]int][]byte{}
+	localCells := 0
+	for rows.Next() {
+		var gx, gy int
+		var bm []byte
+		must(rows.Scan(&gx, &gy, &bm))
+		local[[2]int{gx, gy}] = bm
+		localCells += popcount(bm)
+	}
+	rows.Close()
+	fmt.Printf("库内: %d 块 / %d 格\n", len(local), localCells)
+
+	var newBlocks, newCells int
+	var novBlock, overlap int
+	var overlapGain int
+	for _, b := range inc {
+		k := [2]int{b.GX, b.GY}
+		old, ok := local[k]
+		if !ok {
+			newBlocks++
+			newCells += popcount(b.Bitmap)
+			continue
+		}
+		novBlock++
+		gain := 0
+		for i := range b.Bitmap {
+			gain += poptab[b.Bitmap[i]&^old[i]]
+		}
+		if gain > 0 {
+			overlap++
+			overlapGain += gain
+		}
+	}
+	var lostBlocks, lostCells, lostFull int
+	for k, bm := range local {
+		found := false
+		for _, b := range inc {
+			if b.GX == k[0] && b.GY == k[1] {
+				found = true
+				break
+			}
+		}
+		if !found {
+			lostBlocks++
+			lostCells += popcount(bm)
+			lostFull++
+		}
+	}
+	fmt.Printf("\n【叠加合并 overlay】\n")
+	fmt.Printf("  新增整块: %d 块（+%d 格）\n", newBlocks, newCells)
+	fmt.Printf("  与已有块重叠: %d 块，其中 %d 块含新格（+%d 格）\n", novBlock, overlap, overlapGain)
+	fmt.Printf("  合计新增格: %d，合并后总量: %d 块 / %d 格\n",
+		newCells+overlapGain, len(local)+newBlocks, localCells+newCells+overlapGain)
+
+	fmt.Printf("\n【整体替换 cover】\n")
+	fmt.Printf("  库里现有 %d 块会被丢弃（快照里完全没有这些块），损失 %d 格\n", lostFull, lostCells)
+	fmt.Printf("  替换后总量: %d 块 / %d 格\n", len(inc), incCells)
+	fmt.Printf("  净变化: %+d 块 / %+d 格\n", len(inc)-len(local), incCells-localCells)
+
+	fmt.Printf("\n【其它图层】\n")
+	layers, err := fog.RawLayers(data)
+	if err == nil {
+		for k, v := range layers {
+			fmt.Printf("  %s (%d 字节, %s)\n", k, len(v), hex.EncodeToString(v[:min(8, len(v))]))
+		}
+	}
+}
+
+func min(a, b int) int {
+	if a < b {
+		return a
+	}
+	return b
+}
+
+var poptab = func() [256]int {
+	var t [256]int
+	for i := range t {
+		t[i] = strings.Count(strconv.FormatUint(uint64(i), 2), "1")
+	}
+	return t
+}()
+
+func popcount(b []byte) int {
+	n := 0
+	for _, v := range b {
+		n += poptab[v]
+	}
+	return n
+}
+
+func must(err error) {
+	if err != nil {
+		fmt.Fprintln(os.Stderr, "错误:", err)
+		os.Exit(1)
+	}
+}

tools/idprobe/main.go

@@ -0,0 +1,171 @@
+// 一次性探针：检查 rond 备份里是否存在「跨备份稳定」的对齐键。
+// 用完即可删。
+package main
+
+import (
+	"database/sql"
+	"fmt"
+	"os"
+	"strings"
+
+	"rond-with-you/internal/rond"
+)
+
+func main() {
+	if len(os.Args) < 3 {
+		fmt.Println("用法: idprobe <a.rondbackup> <b.rondbackup>")
+		os.Exit(2)
+	}
+	a := load(os.Args[1])
+	b := load(os.Args[2])
+	fmt.Printf("\n=== A=%s ===\n=== B=%s ===\n", os.Args[1], os.Args[2])
+
+	fmt.Printf("\n---------- ZVISIT.ZIDENTIFIER_ 稳定性 ----------\n")
+	fmt.Printf("A 有 UUID %d / %d，B 有 UUID %d / %d\n", len(a.visitUUID), len(a.visitPK), len(b.visitUUID), len(b.visitPK))
+	inter := 0
+	for u := range a.visitUUID {
+		if _, ok := b.visitUUID[u]; ok {
+			inter++
+		}
+	}
+	fmt.Printf("两次备份 UUID 交集: %d（A 独有 %d，B 独有 %d）\n",
+		inter, len(a.visitUUID)-inter, len(b.visitUUID)-inter)
+	// UUID 相同则对比 pk 是否相同
+	samePK, diffPK := 0, 0
+	for u, pa := range a.visitUUID {
+		if pb, ok := b.visitUUID[u]; ok {
+			if pa == pb {
+				samePK++
+			} else {
+				diffPK++
+			}
+		}
+	}
+	fmt.Printf("UUID 相同者中：Z_PK 也相同 %d，Z_PK 已变 %d\n", samePK, diffPK)
+
+	fmt.Printf("\n---------- ZACTIVITY.ZUID_ ----------\n")
+	fmt.Printf("A UUID %d / %d，B UUID %d / %d\n", len(a.actUUID), len(a.actPK), len(b.actUUID), len(b.actPK))
+	same, dif := 0, 0
+	for u, pa := range a.actUUID {
+		if pb, ok := b.actUUID[u]; ok {
+			if pa == pb {
+				same++
+			} else {
+				dif++
+			}
+		}
+	}
+	fmt.Printf("交集配对：Z_PK 相同 %d，Z_PK 已变 %d\n", same, dif)
+
+	fmt.Printf("\n---------- ZLOCATION 可用稳定列 ----------\n")
+	fmt.Printf("A 列: %s\n", strings.Join(a.locCols, ", "))
+	fmt.Printf("A 地点 %d，B 地点 %d\n", len(a.locPK), len(b.locPK))
+	// 名称+粗坐标是否可作键
+	type lk struct {
+		name string
+		lat  float64
+		lon  float64
+	}
+	keyA := map[string][]int{}
+	for pk, l := range a.locPK {
+		k := fmt.Sprintf("%s|%.5f|%.5f", l.name, l.lat, l.lon)
+		keyA[k] = append(keyA[k], pk)
+	}
+	hit, miss := 0, 0
+	for pk, l := range b.locPK {
+		k := fmt.Sprintf("%s|%.5f|%.5f", l.name, l.lat, l.lon)
+		if _, ok := keyA[k]; ok {
+			hit++
+		} else {
+			miss++
+			if miss <= 5 {
+				fmt.Printf("  B 独有地点 #%d %q %.6f,%.6f\n", pk, l.name, l.lat, l.lon)
+			}
+		}
+	}
+	fmt.Printf("按「名称+坐标(1e-5)」键：B 命中 A %d，未命中 %d\n", hit, miss)
+}
+
+type loc struct {
+	name     string
+	lat, lon float64
+}
+
+type snap struct {
+	visitUUID map[string]int
+	visitPK   map[int]bool
+	actUUID   map[string]int
+	actPK     map[int]bool
+	locPK     map[int]loc
+	locCols   []string
+}
+
+func load(path string) *snap {
+	dir, err := os.MkdirTemp("", "idprobe")
+	must(err)
+	defer os.RemoveAll(dir)
+	db, err := rond.Open(path, dir)
+	must(err)
+	defer db.Close()
+
+	s := &snap{visitUUID: map[string]int{}, visitPK: map[int]bool{},
+		actUUID: map[string]int{}, actPK: map[int]bool{}, locPK: map[int]loc{}}
+
+	rows, err := db.Query(`SELECT Z_PK, hex(ZIDENTIFIER_) FROM ZVISIT`)
+	must(err)
+	for rows.Next() {
+		var pk int
+		var u sql.NullString
+		must(rows.Scan(&pk, &u))
+		s.visitPK[pk] = true
+		if u.Valid && u.String != "" && strings.Trim(u.String, "0") != "" {
+			s.visitUUID[u.String] = pk
+		}
+	}
+	rows.Close()
+
+	rows, err = db.Query(`SELECT Z_PK, hex(ZUID_), COALESCE(ZNAME_,'') FROM ZACTIVITY`)
+	must(err)
+	for rows.Next() {
+		var pk int
+		var u sql.NullString
+		var n string
+		must(rows.Scan(&pk, &u, &n))
+		s.actPK[pk] = true
+		if u.Valid && u.String != "" && strings.Trim(u.String, "0") != "" {
+			s.actUUID[u.String] = pk
+		}
+	}
+	rows.Close()
+
+	rows, err = db.Query(`PRAGMA table_info(ZLOCATION)`)
+	must(err)
+	for rows.Next() {
+		var cid int
+		var name, typ string
+		var notnull int
+		var dflt sql.NullString
+		var pk int
+		must(rows.Scan(&cid, &name, &typ, &notnull, &dflt, &pk))
+		s.locCols = append(s.locCols, name)
+	}
+	rows.Close()
+
+	rows, err = db.Query(`SELECT Z_PK, COALESCE(ZNAME_,''), COALESCE(ZLATITUDE,0), COALESCE(ZLONGITUDE,0) FROM ZLOCATION`)
+	must(err)
+	for rows.Next() {
+		var pk int
+		var l loc
+		must(rows.Scan(&pk, &l.name, &l.lat, &l.lon))
+		s.locPK[pk] = l
+	}
+	rows.Close()
+	return s
+}
+
+func must(err error) {
+	if err != nil {
+		fmt.Fprintln(os.Stderr, "错误:", err)
+		os.Exit(1)
+	}
+}

tools/sqlprobe/main.go

@@ -0,0 +1,57 @@
+// 一次性探针：在 rond 备份的 SQLite 上跑一条查询并打印结果（BLOB 打十六进制）。
+package main
+
+import (
+	"fmt"
+	"os"
+	"strings"
+
+	"rond-with-you/internal/rond"
+)
+
+func main() {
+	if len(os.Args) < 3 {
+		fmt.Println(`用法: sqlprobe <backup> "SELECT ..."`)
+		os.Exit(2)
+	}
+	dir, err := os.MkdirTemp("", "sqlprobe")
+	if err != nil {
+		panic(err)
+	}
+	defer os.RemoveAll(dir)
+	db, err := rond.Open(os.Args[1], dir)
+	if err != nil {
+		panic(err)
+	}
+	defer db.Close()
+
+	rows, err := db.Query(os.Args[2])
+	if err != nil {
+		panic(err)
+	}
+	defer rows.Close()
+	cols, _ := rows.Columns()
+	fmt.Println(strings.Join(cols, " | "))
+	for rows.Next() {
+		vals := make([]any, len(cols))
+		ptrs := make([]any, len(cols))
+		for i := range vals {
+			ptrs[i] = &vals[i]
+		}
+		if err := rows.Scan(ptrs...); err != nil {
+			panic(err)
+		}
+		parts := make([]string, len(cols))
+		for i, v := range vals {
+			switch t := v.(type) {
+			case nil:
+				parts[i] = "-"
+			case []byte:
+				parts[i] = fmt.Sprintf("%x", t)
+			default:
+				parts[i] = fmt.Sprint(t)
+			}
+		}
+		fmt.Println(strings.Join(parts, " | "))
+	}
+}